Question about 2006 Harley Davidson FXDLI Dyna Low Rider
Is the Throttle Lock (THUMBSCREW at the bottom of the throttle housing, in between the two cables) turned all the way clockwise? TURN THE THUMBSCREW COUNTER-CLOCKWISE to release the lock. Be careful - do not to turn counter clockwise enough to were the thumbscrew comes out of the housing. The thumbscrew is held in the housing via a c-clip. If the thumbscrew was turned counter-clockwise too far, and the c-clip came out of the grove on thumbscrew, it is possible that the c-clip and 'shoe' , which are located inside the throttle housing ( aka Control Housing) have jammed the throttle boss, not allowing it to rotate freely. If that is the case, the Throttle/Control Housing needs to be opened and you have to take a look inside. Other than that, check to make sure that there is no obstruction at any of the moving parts of the Carb, especially where the throttle cables connect to it.
If the problem still exists after you've verified that the cables move freely, notify me and I'll go further into it with you.
Posted on Feb 03, 2009
Tips for a great answer:
Jun 17, 2014 | 2006 Harley Davidson FXDLI Dyna Low Rider
Apr 20, 2014 | 2006 Harley Davidson FXDLI Dyna Low Rider
Jun 11, 2012 | 2006 Harley Davidson FXDLI Dyna Low Rider
May 10, 2011 | 2006 Harley Davidson FXDLI Dyna Low Rider
Mar 11, 2010 | 2006 Harley Davidson FXDLI Dyna Low Rider
Sep 23, 2009 | 2003 Harley Davidson FXDL Dyna Low Rider
May 20, 2009 | 2006 Harley Davidson FXDLI Dyna Low Rider
135 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: