Question about 2004 TM Racing MX 125

1 Answer

Clutch my clutch wont engage. the master cylinder is o.k. any solutions.....

Posted by on

  • fagoconor Feb 01, 2009

    any idea wat internal problems it could.

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 5 Answers

Press the clutch lever in,  if it's soft it's still air bound and needs to be bleed.   Press the clutch in and it's hard but smooth, see if it's moving your cluth lever on the engine,  if not again try bleeding line till all air out. Press the clutch and everything external to engine is moving ,  you have internal clutch problems.

Posted on Feb 01, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Clutch wont engage without being primed first


The clutch slave (or master) cylinder is failing. There's a tiny chance bleeding the clutch might help. Check the fluid level, but the clutch slave cylinder is very common in Ford trucks to fail.

Jan 12, 2016 | 2006 Ford F-150

2 Answers

Why wont my clutch will not engage


bad clutch master cylinder or broken clutch line

Mar 26, 2014 | 1991 Nissan Stanza

1 Answer

85 toyota pickup clutch wont engage


The gear box should be okay. Check the clutch-watch if the clutch fork on the bell housing moves when someone presses the clutch. If it doesn't move, the cable needs adjusting, or if hydraulic clutch diagnose the clutch master and slave cylinders. Either one should cause the clutch fork to move and engage the clutch.

Feb 13, 2014 | Toyota Pickup Cars & Trucks

1 Answer

Clutch wont engage after new install


Maybe the clutch master cylinder is not building hydraulic pressure? The internal seals in it may not be holding. Watch the slave cylinder push the clutch lever while someone presses the clutch pedal. If travel is not enough and was bled properly, you may need a new master cylinder.

Jul 07, 2013 | 1991 Chevrolet S-10

2 Answers

2006 chevrolet cobalt clutch issues


Just because the master is new does not mean it isn't faulty. If you are certain you have bleed all the air from the system, I suspect you got a bad master.

Nov 21, 2012 | 2006 Chevrolet Cobalt

1 Answer

2006 chevrolet cobalt clutch issues


check clutch installment procedure could be the problem how it was installed.

Nov 21, 2012 | 2006 Chevrolet Cobalt

1 Answer

Cluth wont pump up no pressure


It sounds to me like they can't get the hydraulic clutch to build up pressure. Without pressure, the clutch will not engage. It's a very simple system, consisting of two major parts. The clutch master cylinder and clutch slave cylinder. Replacing both of them (recommended) would get you a good clutch pedal again. This is assuming, of course, the clutch installation was done properly with no problems.

Nov 01, 2012 | Honda Motorcycles

2 Answers

UNABLE TO ENGAGE GEARS WHEN ENGINE RUNNING ( CAN ENGAGE GEARS WITH ENGINE OFF ). CLUTCH PEDAL GOES STRAIGHT TO THE FLOOR WHEN PRESSED


Need to have it check could be clutch master cylinder or slave cylinder or hose from clutch master cylinder to slave cylinder.check brake fluid at clutch master cylinder sit next to brake master cylinder if empty could have a leak. fill and pump peddle and look for leak.

Jan 12, 2010 | 2001 Ford Focus

1 Answer

1992 Honda Prelude Clutch


Either your master or slave cylinder is leaking (if hydraulic) Replace leaking cylinder with repair kit and blead the system. More serious it could be a problem on the clutch assembly.

Jan 05, 2009 | 1989 Honda Prelude

1 Answer

86 isuzu clutch- master cylinder ran dry


Did you bleed the system? There is probably a bleeder on the slave cylinder and you may need to jemmy the selector fork/ Also look fro a damper valve between the master and slave cylinder... it will need bleeding too.

Nov 07, 2008 | 1986 Isuzu Pickup

Not finding what you are looking for?
2004 TM Racing MX 125 Logo

Related Topics:

330 people viewed this question

Ask a Question

Usually answered in minutes!

Top TM Racing Experts

Arnie Burke
Arnie Burke

Level 3 Expert

4514 Answers

JOHN LAPIER

Level 3 Expert

2419 Answers

Gregg Mahin
Gregg Mahin

Level 3 Expert

36419 Answers

Are you a TM Racing Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...