Resetting combination bike lock

To reset a bike lock with letters, you would not need a key to lock and it more convenient to use. There are two ways to reset your bike lock with letters. You can try to unlock the bike lock with the default combination provided by the manufacturer. It is usually effective and will allow you to reset the lock. When you reset word lock bike lock with letters without password: you have to use force to pull the ends of the bike lock. Then, twisting the rings and take a chance of guessing the correct letter of a particular hole. Finally, rotate it clockwise up to 180 degrees, set your new passcode.

You can't reset it if it is currently locked together. You have to try to "crack" the combination.
184 WordLock Combination AVOID THIS LOCK
Wordlock pick

I’m happy to help further over the phone at https://www.6ya.com/expert/donald_f2ed37026a3ac881

press the helpful button, link is your manual to show reset comb. Honeywell 2072 1 00 Cubic Foot Anti Theft Shelf Safe Operations...

Take it back to the shop. They will provide the correct combination or reset the combination; or will owen you a new lock or refund (if you did not actually forget the combination). Abus makes good locks.

To set a new combination:
The initial combination is set at the
factory to 0-0-0-0
1. Open the compartment door
2. Push the reset lever left and down.
The lever remains in this position
3. Rotate dials to your desired combination
4. Push the reset lever, up and right, back
to the original position
5. Close the key storage compartment door
6. Scramble the combination dials to lock
the door and conceal your combination
7. Close the shutter door

You cannot reset the lock unless you know the combination. You would need someone to pick the lock, like a locksmith and then once it's open you can reset the lock with a new combination.

try all zeros Kryptonite locks come preset to zeros once unlocked there is a small lever inside were it locks together pull it down and set your new combo then push it back up

My new lock didn't come with any instuctions. I followed the link above and located the "bike locks" heading. I found that the question:

- I have a Kryptonite resettable combination lock and can't find the instructions for resetting it. How can I change the combination?

contained a pdf titled :

- Resettable Combination Cable
(red reset buttons inside)

which is not the cryptoflex 1218 but is compatible anyway.

dont hurt your fingers trying to depress the nodules as the diagram says though. to my chagrin i discovered that they will turn easily if you just push them around into place.

here are the instructions:

To set your own combination
Your new lock is preset to open at 0-0-0-5 at the factory.
1. Open the lock by aligning the opening combination
number to the Guide Points and pull out the Lock
Post. (Figure 1)
2. Push down the two Reset Buttons simultaneously
with thumb and forefinger, and turn counterclockwise
until it comes to a stop. (Figure 2)
3.You are now ready to turn the dials to set your
secret combination, such as a phone number, birthday,
etc.
4. After setting your secret combination, turn the
two Reset Buttons again by Thumb and Forefinger
clockwise until it comes to a stop and back to its
original position.
5. Verify your new combination before using your
lock. Insert the Lock Post all the way into the Locking
Port but do not turn the dials. Pull out the Lock Post.
Your lock is ready to use.
6.The reset operation is now complete. Repeat
steps 1-5 anytime you wish to change your secret
combination.

Try this....
My new lock didn't come with any instuctions. I followed the link above and located the "bike locks" heading. I found that the question:

- I have a Kryptonite resettable combination lock and can't find the instructions for resetting it. How can I change the combination?

contained a pdf titled :

- Resettable Combination Cable
(red reset buttons inside)

which is not the cryptoflex 1218 but is compatible anyway.

dont hurt your fingers trying to depress the nodules as the diagram says though. to my chagrin i discovered that they will turn easily if you just push them around into place.

here are the instructions:

To set your own combination
Your new lock is preset to open at 0-0-0-5 at the factory.
1. Open the lock by aligning the opening combination
number to the Guide Points and pull out the Lock
Post. (Figure 1)
2. Push down the two Reset Buttons simultaneously
with thumb and forefinger, and turn counterclockwise
until it comes to a stop. (Figure 2)
3.You are now ready to turn the dials to set your
secret combination, such as a phone number, birthday,
etc.
4. After setting your secret combination, turn the
two Reset Buttons again by Thumb and Forefinger
clockwise until it comes to a stop and back to its
original position.
5. Verify your new combination before using your
lock. Insert the Lock Post all the way into the Locking
Port but do not turn the dials. Pull out the Lock Post.
Your lock is ready to use.
6.The reset operation is now complete. Repeat
steps 1-5 anytime you wish to change your secret
combination.

I don't know if Master Lock will supply a combination or not but they can open it for you. There might be ownership issues that need verified. They don't know who's keys are in it and they don't know if the lock has been stolen.