Question about 1991 Suzuki GSX-R 750 M

1 Answer

Clutch not being adjustable

I have 98 gsxr 750. I put 520 conv chain and sproket kit, the chain is fine. I started it on the stand and try to compress the clutch lever and notice it was really hard. I when to put it in first with clutch being compress the rear wheel started to turn. I when back to adjust at the top at the handle bars then at the bottom. It help a little but still the rear wheel would turn. I'm going to replace the cable and see if that would work. Then change the oil. The clutch never seem to slip prior to the chain upgrade. Is that my clutch is going out. Need some advice to resolve the problem.

Posted by on

  • ccrivera99 Jan 30, 2009

    On the left side of the motor where the front sprocket goes it is just a cover and the clutch cable attaches to a lever. When i put this cover on it just slips on that is it. the clutches its self are on the right side of the motor.

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 2,976 Answers

Changing the sprockets & chain shouldn't have changed the clutch. Pull things back apart far enough to make sure you didn't get something in the way of the clutch plate free play.

Posted on Jan 30, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My 2000 Suzuki 600 gsxr clutch issues


Replace all the clutch plates and the springs, or get a racing clutch. And stop slipping the clutch to do wheelies :>)

Plates
https://store.schnitzracing.com/suzuki/gsxr600/clutch

Springs
http://www.motorcycle-superstore.com/1508761/d/2000-suzuki-gsx-r600-street-bike-clutch-springs

  • 2000 Suzuki GSX-R600 Clutch - Motorcycle Superstore www.motorcycle-superstore.com/873178/d/2000-suzuki-gsx-r600-clutch Clutch 2000 Suzuki GSX-R600 ... 2000 Suzuki GSX-R600 Clutch. ... it was easy to install and it was the first clutch system i ever put on my 2007 GSXR 1000 ...
  • 2000 Suzuki Katana 600 Clutch Springs - Motorcycle Superstore www.motorcycle-superstore.com/.../d/2000-suzuki...600-clutch-springs Clutch 2000 Suzuki Katana 600 ... KG Clutch Factory High Performance Spring SetFor ... and it was the first clutch system i ever put on my 2007 GSXR 1000 ...
  • GSXR 750 Suzuki Sport Motorcycle Clutch Parts www.orientexpress.com/c-84-clutch_suzuki-sport-gsxr750.aspx ... Clutch Springs Suzuki - GSXR 600 2004-2005/GSXR 750 2000-2005/High Performance/Heavy Duty. Price: $35.95 (USD) GB Racing - Clutch Cover Suzuki ...
  • GSXR 600 Suzuki Sport Motorcycle Clutch Parts www.orientexpress.com/c-84-clutch_suzuki-sport-gsxr600.aspx ... Clutch Springs Suzuki - GSXR 600 ... Orient Express - Clutch Springs Suzuki - GSXR 600 2004-2005/GSXR 750 2000 ... GB Racing - Clutch Cover Suzuki - GSXR 600 ...
  • 2000 Suzuki GSX-R600 Street Bike Clutch Springs ... www.motorcycle-superstore.com/1508761/d/2000-suzuki-gsx-r600... Clutch 2000 Suzuki GSX-R600 Street Bike Parts ... Race Suits; Riding Suits; Riding Underwear; Socks; ... Clutch; Cooling System; Drive; Electrical; Engine;
  • Suzuki GSXR600 Clutch Plates and Parts - Schnitz Racing https://store.schnitzracing.com/suzuki/gsxr600/clutch Shop Schnitz Racing for Suzuki GSXR600 clutch plates, ... Valves & Springs; Exhaust. ... Suzuki GSXR600 Clutch Components and Parts from Schnitz Racing.
  • Suzuki GSXR 600 1997-2000 EBC SRK Complete Clutch Kit www.nicecycle.com/Suzuki-Clutch-Kit-p/ebc-clutchkit36.htm Suzuki GSXR 600 1997-2000 EBC SRK Complete ... heavy duty clutch springs of either ... Suzuki GSXR 600 2006-2007 EBC SRK Complete Clutch Kit Suzuki GSXR 600 ...
  • Sigma Clutches for Suzuki - Bikehps.com www.bikehps.com/acatalog/Sigma_Clutches_for_Suzuki.html Sigma Clutches for Suzuki. Sigma Suzuki GSXR600 & GSXR750 K6-K8 2006-2008 Performance Slipper Clutch . Ref: ... - Requires GSX-R1000 clutch springs (not ...

    Suzuki GSXR600 Clutch Plates and Parts Schnitz Racing
  • Jun 12, 2016 | 2000 Suzuki GSX-R 600

    2 Answers

    Why wont it go into gear ?


    Clutch pack gone? Drive belt/chain/shaft gone? Since the clutch pack is inside, are you sure it's good? You may need to rebuild it... which, fortunately, you can do without dismounting the engine.

    Jul 18, 2014 | Suzuki GSXR 600 750 1000 KEYCHAIN KEY RING...

    1 Answer

    2001 750 gsxr engine stops when selecting gear


    Check sidestand and clutch lever lockout switches...

    Mar 09, 2012 | 2001 Suzuki GSX-R 750

    1 Answer

    2000 gsxr 750 y its been sat for only about a month and will not start. battery is fine and charged all lights at full power when key is turned but when i press starter nothing. never had a starter prob...


    Have you checked the side stand switch is in the up position, and the plunger is not sticking , you hav e pulled in the clutch lever , checked the wires have not come of the clutch safety switch, at the solenoide jump the two thick wires with some insulated pliers, this will put power direct to the starter and it should turn the engine over and start, if the imobiliser if fitted is not holding it off, this will then rule out a problem with the starter motor and solenoide circuit.

    Apr 30, 2011 | Suzuki GSX-R 750 W Motorcycles

    2 Answers

    My Husqvarna 16 in chainsaw is no longer working. The saw starts but the chain will not turn on the bar. Manually moving the chain results in the chain clicking and skipping over the sprocket. Could a...


    Did the chain come off while at speed? The chain catcher causes burrs to form on the drive links when occurs. Without the catcher the spinning sharp chain contacts your leg. Were you wearing chaps? We don't need no stinking PPE!!!
    Use a flat file on the drive link flats to remove the burrs.
    34be72d.jpg 5ab118d.gif Chain Adjustment
    1. Make sure the chain brake is off (gloves will protest your fingers).
    2. If necessary, loosen the bar nuts that are clamping the clutch cover in place (or whatever holds the clutch cover and bar on). They don't need these really loose - finger tight will do.
    3. Ease the tension adjustment until the chain is obviously loose.
    4. Using one hand, hold the nose of the bar up.
    5. While holding the nose up, adjust the tensioner so that the center of the chain just touches the underside of the bar, add a touch more.
    6. Continue holding the nose of the bar up & tighten up the bar nuts / bolts / quick-release system. HTH
    Lou

    Nov 12, 2009 | Husqvarna Chain Saw 20" Bar

    1 Answer

    Clutch problem or cable


    I did the same upgrade with the same bike. put a 16t in front and 64t in rear, never had a problem. just more power. I did notice when the chain was to tight things werent working right. gave the chain a little slack and the bike performs great. you might want to remove the front sprocket cover and check if the end of the clutch cable is installed properly. Hope this helps!

    Jan 30, 2009 | 1998 Suzuki GSX-R 750 W

    Not finding what you are looking for?
    1991 Suzuki GSX-R 750 M Logo

    228 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Suzuki Experts

    yadayada
    yadayada

    Level 3 Expert

    67930 Answers

    Arnie Burke
    Arnie Burke

    Level 3 Expert

    4514 Answers

    Ed Nelson
    Ed Nelson

    Level 2 Expert

    149 Answers

    Are you a Suzuki Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...