Question about 1992 Honda CBR 600 F(2)N

4 Answers

Honda cbr 600 wont start

My 1993 cbr 600 wasnt starting very good ,change the plugs .since then wont start put old plugs back,still wont start renewed ht leads and caps .still nothing .checked for spark good spark from each plug .started but like seems not running on all clyinders. checked firing order ok . put second hand cdi on and pulse genorator then it would fire then huge bang or back fire.. not sure if i got b/w and blue/ white on coils right way. took carbs off and clean bowls out ,and blew jets out never altered any settngs just cleaned but they where clean. spent so much and money on this can you please give me any advice ps the kill switch in run position , perol flows from tank and plugs are wet. would check compresson but havent got a tester. many thanks

Posted by on

  • joe May 11, 2010

    was the bike sitting for a few months? if so, did it run ok prior to the break?



    anything in the exhaust pipe or in the air cleaner (i have seen mice make a nest in there) to cause it not to breathe?



    and its happened before where a friend poured diesel into his tank when he thought he was buying gasoline.

  • Anonymous Mar 28, 2014

    tried jumping cleared cleaned stsrter switch

×

Ad

4 Answers

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 6 Answers

Hi, each lead has the specific number on it. if you do this correctly then they genrally give you an idea to where the sit in the coils( the way they bend :-) ) also i believe the coils are better off been attached to the frame once you are sure leads are in corect order and possitioned correctly in the coils.i just presumed the coils neaded earthing. make sure battery is pleny charged as a bad battery can just hinder. it is also very easy to flood the bike so just check the plugs again. if they are unusually wet then dry them off and try again . otherwise maybe try cleaning all electics.

hope this somehow helped
gavin barraclough

Posted on Apr 26, 2009

Ad
  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Try the wires from the coils as when you constantley rub them back and forwards when changing plugs for instance,mine became worn and i cud get the bike to run on 3 cylinders then 4 simply by bending one of the 4 coil wires

ian

Posted on Jul 14, 2009

Ad
  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 3 Answers

The carburetors need to be completely disassembled and soaked in a carb specific solvent. Just blowing out the carbs will not work. If there is a local shop you deal with , ask them how much they would charge you to soak your carbs for you. Or you can go to napa or any other large car parts house and get a 1 gallon can of carb cleaner...which is very different than the stuff that comes in an aerosol can. It will run you about 50 bucks for the gallon of cleaner and it comes with a basket in it. If you tear down the carbs you will be able to soak each carb body...But only one at a time. The carbs have tiny orifices that become plugged or restricted and soaking them is the only fix. Make sure all the rubber is out. O-rings...And when they go back together they will have to be synchronized.

Motoboy1
motoboyzmotosports.com

Posted on Mar 05, 2009

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 99 Answers

Sounds like you have got the plug leads on in the wrong order. There is possibly some numbers on the coils, that corralate to the cylinders.


The firing order is usually 1-3-4-2.

TL

Posted on Jan 31, 2009

  • Craig Davies
    Craig Davies Feb 01, 2009

    Just a thought, did you have the coils off the bike?



    TL

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

1993 Honda CBR 600 F oil change


Hi, Anonymous for this scenario you will need your service, parts fiche, and owners manual if you can't find the best tool you ever bought for your Honda, despair not, for a mere zero $0 you can download another one. For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
Honda CBR F2 Oil Change Honda Tech Honda Forum Discussion
Oil change CBR600F2 92
1991 1994 Honda CBR600F2 Service Manual Moto Data Project
http://www.partsfish.com/page/oem-parts-for-honda
Honda CBR600F Owner Manual

May 09, 2014 | 1993 Honda CBR 600 F(2)P

1 Answer

1987 CBR 600 will not start when hot


Hi, Anonymous and the usual suspects are:
1. Faulty ignition coil.
2. Faulty spark plug cables.
3. Faulty temperature sensor.
4. Faulty starter motor.
5. Valves adjusted too tight.
6. Spark plug gap too wide.
7. Fuel has vapor lock.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
Wont start when hot slow crank like battery dead but not dead CBR Forum...
04 600rr Won start when hot starts fine when cold
http://www.home-business-host.com/images/cbr/CBR1000F%20SC21%20(1987-1996).pdf
http://www.partsfish.com/page/oem-parts-for-honda
Honda CBR600F Owner Manual

Jul 29, 2013 | 1987 Honda CBR 600 F Hurricane

1 Answer

1993 Honda CBR 600 F(2)P torque specs for cam journal caps


Hi, Anonymous for this scenario you will need your service manual, parts fiche, and owners manual if you can't find the best tool you ever bought for your Honda, despair not, for a mere zero $0 you can download another one.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
http://www.fireblades.org/forums/honda-cbr-600/103495-f293-tightening-torques.html
1993 Honda CBR 600 2 torque specs for cam journal caps Google Search
Honda CBR600F4I 2001 Service Manual
https://www.partsfish.com/page/oem-parts-for-honda
Honda CBR600F4i Owner Manual

Jan 08, 2013 | 1993 Honda CBR 600 F(2)P

1 Answer

1997 Honda CBR 600 F(3)V will not start


Hi, Jmillerjr1 and the usual suspects are:
1. Fuel tank empty.
2. The fuel tank has old dead gas.
3. Fuel tank bottom contaminated with ethanol sludge, dirt, water, rust, etc.
4. Fuel supply valve/petcock turned off.
5. Fouled spark plugs.
6. Engine flooded as a result of overuse of the choke.
7. Vacuum hose to the fuel supply valve/petcock disconnected, broken, cracked, or pinched.
8. Fuel valve/petcock or filter clogged.
9. Fuel line to carburetor or throttle body pinched, kinked or blocked.
10. Carburetor float stuck.
11. Fuel injectors clogged.
12. Fuel injectors stuck open.
13. Quick disconnect check ball stuck.
14. Compression below 75 PSI.
15. A stuck-bent-burnt valve.
16. Severely discharged or a damaged battery should have 12.5 volts or more and be able to pass a proper "LOAD" test if necessary, you may have a cursory reading of 12.5 volts or more but little or zero amperage the battery is faulty and must be replaced, AGM batteries fail in this scenario more so than lead-acid batteries.
17. Check battery terminals for damage or corrosion, check the battery cables at "BOTH" ends for loose, corroded, or broken connectors, "INSIDE" and outside the cable harness, perform connector wiggle test and check cables with an ohmmeter if necessary.
18. Loose or corroded wire connection at the coil or plug between ignition sensor and ECM module.
19. Spark plug cables in bad condition and shorting check for spark leakage in the dark, cable connections loose, or connected to the wrong cylinders.
20. Ignition timing incorrect due to a faulty ignition coil, ignition module or MAP, CMP, CKP, O2, TPS, ETP, IAC sensors.
21. Faulty neutral, clutch, kickstand safety switch.
22. Faulty fuel pump or fuse or relay.
23. A stuck bent or burnt valve.
24. Tilt sensor needs a reset.
25. Security system not disarming alarm needs a reset.
26. Check for engine trouble codes.
27. Faulty run/stop switch.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
http://www.fireblades.org/forums/honda-cbr-600/62949-97-cbr-600-f3-wont-start-help.html
HONDA CBR WONT START TRY THESE TIPS
Honda CBR600F4I 2001 Service Manual
https://www.partsfish.com/page/oem-parts-for-honda
Honda CBR600F Owner Manual

Jun 03, 2012 | 1997 Honda CBR 600 F(3)V

1 Answer

1993 Honda CBR 600 F(2)P firing order


Hi, Chevy_ryder8 for this scenario you will need your service manual, parts fiche, and owners manual if you can't find the best tool you ever bought for your Honda, despair not, for a mere zero $0 you can download another one.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
Firing order and which coil to which plugs CBR Forum Enthusiast forums for...
Thread Ignition firing order on honda Cbr600rr
Honda CBR600F4I 2001 Service Manual
https://www.partsfish.com/page/oem-parts-for-honda
Honda CBR600RR Ower Manual

Dec 31, 2011 | 1993 Honda CBR 600 F(2)P

1 Answer

1996 Honda CBR 600 F(3)T will not start when the engine is hot


Hi, Tommy8824 and the usual suspects are:
1. Faulty ignition coil.
2. Faulty spark plug cables.
3. Faulty temperature sensor.
4. HISS light not going off.
5. Faulty starter motor.
6. Valves adjusted too tight.
7. Spark plug gap too wide.
8. Fuel has vapor lock.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
http://www.fireblades.org/forums/honda-cbr-600/49891-problems-starting-only-when-hot.html
Wont start when hot slow crank like battery dead but not dead CBR Forum...
Honda CBR600F4I 2001 Service Manual
https://www.partsfish.com/page/oem-parts-for-honda
Honda CBR600F Owner Manual

May 15, 2011 | 1996 Honda CBR 600 F(3)T

1 Answer

1994 honda cbr 600 motorcycle wont start just turns over put new petrol and replaced plugs but still wont start please help


check pulse generator circuit for any opens or shorts..even if you still show a weak purplish/red spark its bad..it must be a big bluish/white spark..check plug #1 for spark and then check #3 foe spark if there both week then its your pulse generators that are bad ..but if one of them has a blushish spark then it that systems coil..eg #1and#4 or the #2and #3 coils..

Aug 19, 2010 | 1994 Honda CBR 600 F(2)R

2 Answers

Bike wont turn over


I have a 1996 cbr 600 f3 and when I first bought it used it would not turn over for the life of it. It turned out that a major problem was the spark plugs needing to be replaced. Thats the first thing to do. Next clean out those carbs with some good carb cleaner.

Nov 10, 2008 | 2005 Honda CBR 600 F

Not finding what you are looking for?
1992 Honda CBR 600 F(2)N Logo

934 people viewed this question

Ask a Question

Usually answered in minutes!

Top Honda Experts

Arnie Burke
Arnie Burke

Level 3 Expert

4821 Answers

yadayada
yadayada

Level 3 Expert

78936 Answers

bazzz7071
bazzz7071

Level 2 Expert

342 Answers

Are you a Honda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...