Question about 2004 Yamaha YZ 250 F

2 Answers

Oil change How do i know how much oil to put in my 05 yzf 250 when doing oil changes cause theres no viewing window

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 10 Answers

1 quart and 1 3rd quart. so its 1 and 1 third quarts

Posted on Feb 02, 2009

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 29 Answers

My best advice is coming from home mechanics. I work on my own bikes. I suggest getting on ebay and buying a chilton manual this will take you step by step on everything on your bike you will ever need to do. They are like 20 dollar. But it also should be in the back of your owners manual.

Posted on Jan 30, 2009

  • Brad Romesberg Jan 30, 2009

    My best advice is coming from home mechanics. I work on my own bikes. I suggest getting on ebay and buying a chilton manual this will take you step by step on everything on your bike you will ever need to do. They are like 20 dollar. But it also should be in the back of your owners manual.

  • Brad Romesberg Jan 30, 2009

    My best advice is coming from home mechanics. I work on my own bikes. I suggest getting on ebay and buying a chilton manual this will take you step by step on everything on your bike you will ever need to do. They are like 20 dollar. But it also should be in the back of your owners manual.

×

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I recently adjusted the suspension on my 05 yzf 450 but there still soft i need to know how to add oil to the forks and i need to know how mutch to add .


The oil is measured in by level, not by volumne.
So add the same amount to each fork to raise the level 10 or 20mm.
It can help to use a heavier wt oil, check the level of what is in there, and replace to the same amount.
Write notes and change one thing at a time, so you can set it back if the chanfges are not working,The manual has a lot of good info

Jun 04, 2011 | 2004 Yamaha YZ 450 F

2 Answers

How many litres of oil goes into a 05 yamaha yzf r1?


The oil capacity for the 2005 version is 3.8l

Mar 05, 2011 | 2005 Yamaha YZF-R1

1 Answer

Hi my kickstart not engaging engine on my yzf 250 05 is this a job i can fix myself if so how


You should be able with some mechanical knowledge. all the kick mechanisims are under the clutch cover
You will need to drain coolant and lay bike on left side, remove kickstarter, and rightside cover,
There is a odd shaped spring that causes the ratchet to engage, If this is the problem it is a simply fix. There can be other causes but this is the most likely and should be visibly obvious.

Sep 11, 2010 | 2004 Yamaha YZ 250 F

1 Answer

Need to do oil change yz250f 05


there is one bolt on the bottom of your engine, it should be 14mm then fill your engine with the correct amound off cc's thats required. it will say on your engin case by where the oil fill hole is.

Jul 16, 2010 | 2004 Yamaha YZ 250 F

1 Answer

2004 YZ 250 F: I just bought a 2004 yzf 250. How do I chech the o...


Put the bike on a stand or make sure the bike is level and upright. Start the bike. Let run for 1 min. Shut down. Let sit for 5 minutes. There is a dipstick on the frame below the handlebars on the left side of the bike. Unscrew and check. Another important check to do is to check that you have pressure. On the back side of the head, you will see a metal line running up it. Just to the right of the top of the line you will see a 8mm bolt. This is the oil gallery bolt. Loosen it quite a bit and start the bike. if within one minute you do not see oil seepage from it, you do not have oil pressure. Shut the bike down as this will seize the engine within a couple of minutes. If you have pressure, tighten the bolt back to 7.2Ft. LBS. I suggest you get a service manual for this bike though as it has alot of important information that can help keep you from making costly mistakes. I can send it to you for $30 digital, or $100 grease proof and digital binder copy.

May 16, 2010 | 2004 Yamaha YZ 250 F

1 Answer

I need a step by step procedure to change the oil on my 2003 Yamaha 250 YZF


buddy its simple run the bike for 10 mins to warm oil then drop the plug out underneith the engine and let it drain the once done put the plug back in and unscrew filler cap and fill the engine with 1100mls of oil then replace plug and your done also i reccomend changing the oil filter aswell

Nov 14, 2009 | 2003 Yamaha YZ 250 F

1 Answer

How much oil should i put in my yzf 250


As much as it takes to come up on the oil stick between the marks. Use the proper oil ONLY

Oct 28, 2009 | 2004 Yamaha YZ 250 F

2 Answers

Cant find dipstick on 1997 yamaha yzf


I believe there is no dipstick, but there is a viewing window on the right side (sitting on the bike) next to the oil case. its just a little small around window about the size of a nickle

Apr 18, 2009 | 1997 Yamaha YZF 600 R thunder cat

Not finding what you are looking for?
2004 Yamaha YZ 250 F Logo

Related Topics:

436 people viewed this question

Ask a Question

Usually answered in minutes!

Top Yamaha Experts

Steve Sweetleaf
Steve Sweetleaf

Level 3 Expert

1128 Answers

D. E. Hev

Level 3 Expert

1059 Answers

mikeuk

Level 2 Expert

61 Answers

Are you a Yamaha Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...