How to input new codes

I have forgotten the PIN code of my Philips TV. How can I reset it? A. If you have not set your PIN-code when you first turn on the TV set, you will have to set your PIN-code before using the lock feature.
To set the PIN code for the first time:

1. Press the 'MENU' button on the remote control.
2. Press cursor up/down to select SETUP and press cursor right.
3. Press cursor up/down to select PREFERENCES and press cursor right.
4. Press cursor up/down to select MENU PREFERENCES and press cursor right.
5. Press cursor up/down to select SET PIN and press cursor right.
6. When the prompt PLEASE ENTER A 4-DIGIT PIN appears on the screen, enter an easily remembered new four-digit code and enter the new code the second time to confirm it.
7. Press the 'MENU' button to exit the menu.

B. To change the PIN code if it is unknown or forgotten:

1. Press the 'MENU' button on the remote control.
2. Press cursor up/down to select SETUP and press cursor right.
3. Press cursor up/down to select PREFERENCES and press cursor right.
4. Press cursor up/down to select MENU PREFERENCES and press cursor right.
5. Press cursor up/down to select CHANGE PIN and press cursor right.
6. When the prompt PLEASE ENTER YOUR CURRENT PIN* appears on the screen, enter the universal code 0711.
7. Then enter an easily remembered new four-digit code and enter the new code the second time to confirm it.
8. Press the 'MENU' button to exit the menu.

b2c article details page social title

Hi there,

If you have lost or forgotten the code, the default factory password is 0000. This should still work even if you have set another password and forgotten. You should also deactivate the lock fully from the menu if you no longer wish to use it or activated it accidentally.

Disabling the child lock (and/or other locks):

(This can be done from the remote or the buttons on the front of the TV)

1. Press MENU to open the main menu.

2. Press CH+ or CH- to highlight PREFERENCES.

3. Press OK to enter the PREFERENCES menu.

4. Press CH+ or CH- to highlight FPA Lock (Front Panel lock) .

5. Press VOL+ or VOL- to switch the lock on or off

6. Press MENU repeatedly to exit the menu

The menu will disappear if no buttons are pressed on the remote for several seconds.

Please let me know if you need further assistance.

Regards,

BElectric.

hi,
u can sellect input by following setup

1. Press INPUT. on remote
(A list of selectable sources appears).
2. Press INPUT again to select the input
source.
( An image from the selected source automatically
displays).
Each time INPUT is pressed, the input source
toggles.

If the image does not come in clearly from the external
equipment connected to INPUT 1 or 2, you may need
to change the input signal type setting on the "Input
Select" menu.

1. Press MENU to display the MENU screen,
and then press c/d button (on remote) to select "Option".

2.Press a/b button (on remote) to select "Input Select", and then
press ENTER.

3.Press a/b button (on remote) to select the signal type you
want to set, and then press ENTER.
4.Press MENU to exit.

just try these. need further help feel free to contact.
ok.

Do a hard reset but keep in mind this will restore to its factory default settings

Turn off the mobile phone.Press and Hold the following three buttons: the green Call Answer button, the “*” button, and the number “3′ button.While holding these three buttons, press the power button to switch on the device.Release your fingers when the screen displays the Nokia Logo and the language selection menu further.

www.usedcellphoneshop.com

Press menu for the menu to appear. Press the Up or down button to select features then press ok to display the features screen. Press the up or down buttons to select child lock then press ok the pin input appears. Input (3001) with channel select. The child lock menu appears and the pin is cleared. You can then enter a new pin. Hey if this works give me a vote please so I'll know if I helped.

Hi,

if you need to manually enter the keys a different procedure is required to previous versions of the firmware.

To access the key entry screen try the following:

On the remote press "Menu".
Highlight "Language Settings" and press "OK".
Highlight "1st audio lang" or "2nd audio lang" or "Subtitle lang" NOT "Menu language", then press the buttons 1,9,6,8 in order.
The key entry screen should now be visible.
Use the left/right arrow keys or "FAV" button to find the "NagraVision" screen which contains the keys for UK service providers.

to reveal the "Emulation" and "EMM Capture" Highlight "Menu language"
, then press the buttons 1,9,6,8 in order.

If you have the original remote or at least one with a QV button on your remote it is easy.
When prompted for the code, Just hold down the "QV" and the number 9 together for a bit.
That will unlock the set.
I would then go the the main menu and unlock the set from the menu. Use the "QV" and 9 to get in and turn off the password.

I hope this information allows you to resolve this issue.
If I have helped you, please help me, and rate this suggestion the highest FixYa rating. (Two Thumbs Up)
Please Note: If you can not rate this post with the highest rating, then please do not leave any rating. I am doing this for free and I do not think that any rating other that the best is needed.
If you need further assistance please comment to this post and I will try to help you further.

press the menu button then the yellow button

I don't know the sharp(mfg) code to activate my universal remote

when the phone ask for the unlock code you press and hold the menu key button till the screen changes asking for the security code , hoping that you have not changed it, just enter 0 six times...eg 000000