Question about 1993 kawasaki ZZR 1100

1 Answer

Fuelpump failure on ZZR 1100 C Model

Hi any idea what the fuel pump pressure is suppose to be on the OEM pump?Can you use an aftermarket one to replace the original one?

Thanks
Deon

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Novelist:

    An expert who has written 50 answers of more than 400 characters.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

  • Expert
  • 137 Answers

Hi deon,, in theory u can use any fuel pump on bikes,, most pressure is the same on all makes, wen the carbs are full of fuel the will shut off automaticly,,so yes u can use an after market one,,,cheeeers

Posted on Jan 29, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Yamaha 1100 2006 v star engine will not idle


Hi, Anonymous and the usual suspects are:
1. Idle speed improperly adjusted.
2. Air fuel mixture screws not properly adjusted.
3. Inlet system air leak.
4. Leaking accelerator pump.
5. Loose low-speed jet.
6. Plugged low-speed jet.
7. Contaminated or plugged low-speed circuit.
8. Enrichner valve/choke not seated or leaking.
For more information about your issue and valuable "FREE" downloads that you will need please click on the websites below. Good luck and have a nice day.
2004 Vstar idle only on full choke problem
2003 Star 1100 Custom won idle without choke aftermarket exhaust
http://www.sloneservices.com/SilverBack/Other-Stuff/V-StarShopManual99-07.pdf
OEM parts for Yamaha
http://www.sloneservices.com/SilverBack/Other-Stuff/V-StarOwner%20Manual.pdf

May 29, 2014 | 2006 Yamaha V Star 1100 Classic

1 Answer

How i can repair a fuel pump of a kawasaki zzr1100 it doesnt work even when connected directly straight from battery.


Check to see if your fuel pump relay is good first. Then if it is good you are going to have to buy and install a new fuel pump.

Sep 22, 2010 | 1991 kawasaki ZZR 1100

1 Answer

2001 chevy blazer, have replaced fuelpump,filter,fuel pump relay.Fuel pump does not run everytime key is turned to start.When pump does run the engine runs for a short time and quits.When I try and...


when replacing fuel pumps on alot of chevys its recommended to replace the harness also or you can have repeated fuel pump failures. Do a search on,, why repeat fuel pump failures;; and you'l have some info to go on.

Nov 26, 2009 | 2000 Chevrolet Blazer

1 Answer

99 olds bravada. just replaced fuel pump 2 weeks


Aftermarket fuel pump failure? Try "thepartsladi" store on eBay for low price GM OEM parts. Could also be wiring harness to fuel pump.

Nov 12, 2009 | 1999 Oldsmobile Bravada

1 Answer

Zzr 1100 c model revs fine stationary and starts ok but when riding will not go faster than 50mph and stutters back and forth all the time


The spec sheet doesn't say if your model has fuel injection or carbs. Assuming carbs, disassemble and clean them. You will want the shop to balance and sync the carbs as well. This should get you back on the road in style.

Please rate this solution. Thanks!

Mar 31, 2009 | 1990 kawasaki ZZR 1100

1 Answer

Starts then dies


Aftermarket pump or OEM? If aftermarket, take it back and get a new one. Before you go through all that though, you may want to check the fuel pressure. You need to check the specifications on what the pressuresupposed to be for this model.

Feb 21, 2009 | 2000 GMC Jimmy

1 Answer

2001 dodge 2500 diesel 24 valve intermitant hesitation


Have you ever had the mechanical lift pump go out on these vehicles? If the fuel pressure drops under 5psi on the VP44 injection pump for any length of time, the diaphrams get weakened and especailly when the warmer seasons come back, you will notice fuel delivery problems. A new/rebuilt pressure pump is required! Sorry for the bad news, if indeed this is the case. One solution/prevention is to replace the lift pump with the upgraded Mopar (goes into the tank now) or an aftermarket pump like the FASS pump or the like. Anyone that has the VP44 injection pump should upgrade ASAP! This is a common problem on the OEM mechanical lift pump on this particular run of Rams. Need to do it before you run up a costly repair bill later on down the road. The stock/OEM lift pumps WILL go out, sometimes as little as 12k miles, sometimes 50k miles.....I had 3 go out, Stock at 43k, Mopar replacement lasted 31k and the 3rd (aftermarket OEM) lasted 14k. I had a fuel pressure guage installed a very long time ago to alert me of failures. The 4th go around I installed the FASS and now it maintains 21 to 27psi even with chip mods switched to extreme! I am still on original VP44 pump (knock on wood!)
Good Luck!

Dec 15, 2008 | 2001 Dodge Ram 2500 Truck

1 Answer

Fuelpump problem 2000 Suburu outback


check fuel lines for leaks...
good luck

Aug 16, 2008 | 2000 Subaru Outback

Not finding what you are looking for?
1993 kawasaki ZZR 1100 Logo

Related Topics:

242 people viewed this question

Ask a Question

Usually answered in minutes!

Top kawasaki Experts

Arnie Burke
Arnie Burke

Level 3 Expert

4514 Answers

yadayada
yadayada

Level 3 Expert

68032 Answers

chris

Level 2 Expert

232 Answers

Are you a kawasaki Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...