Question about 2000 Husqvarna TE 610

1 Answer

I have a 93 te 610 goes great but needs a piston i wana get it registered. is it worth and if i change oil all tha time well after a few rides will it handle daily road work

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Novelist:

    An expert who has written 50 answers of more than 400 characters.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

  • Expert
  • 137 Answers

Hi matey,,pistons are cheaper than u think m8,, so yeah id go 4 one,, and on the daily road work u were askin,, it will handle wot u give it m8,of corse doin road work instead of off roading ,it will sound and feel as if u could do with another gear puttin in,, cause the roads are more straighter than tracks,,, try not to keep the throttle wide open on straight roads all the time,, u wont have a problem,, ,,the usual way to try and reduce the i could do with another gear i think solution,, and u feel u want to put a gear in ,,getting a bigger back sprocket ,,a few teeth more than u have on the bike already, will gear it down a bit, and sound more relaxed wen riding,, hey enjoy mate ,,,itl be fun,,,cheers,

Posted on Jan 28, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Smoking white


Probably going to need new piston rings. Pretty sure your burning a little oil.

Feb 10, 2014 | Suzuki Motorcycles

1 Answer

Hey guys I've got a 1995 hasqvana 610 te when the


put it on craigslist and take 700 for it to a guy who will blow it up the next day

Mar 30, 2012 | 2000 Husqvarna TE 610

1 Answer

My clutch is slipping on my 2000 husqvarna te 610 ,can i adjust it or do i need new plates?


The cluch contro level must have a 0,12 do 0,20 in. idle shifting before beginning to disengange the cluch. to adjust: Loosen the lock nut wath stay after lever on the cluch line. If its loosen operate the adjuster. The slack decreases when unscrewing, and increases when screwing. Take care to tighten properly the lock nut. if its not helping more. change the cluch disc`s.
If you finde that thi info is heling you - please rate my solution.
Thank you and nice ride!

Feb 24, 2011 | 2000 Husqvarna TE 610

1 Answer

How much oil to put in forks of my 1999 TE 610 Husqvarna?


You don't mention the type of your engine.But to make it easy for you to determine oil capacity, find the dipstick that gauge the oil level and you will see markings inch away from the tip.there is maximum and minimum level mark on it.

Sep 05, 2010 | 2000 Husqvarna TE 610

1 Answer

Oil pump on the TC 610/99


hi mate the oil pump is located on the left side of the engine and is behind the clutch basket . you need to remove left side case and remove clutch basket and is the second cog from front of engine good luck!

May 15, 2010 | 2000 Husqvarna TE 610

1 Answer

How much to rebuild my Husqvarna TE 610


i just had my top-end redone, valves and timeing chain. on my 1998 model, just the parts were 700.

Jan 10, 2010 | 2000 Husqvarna TE 610

1 Answer

Just wondering what the engine oil capacity is on the te 610


abt 1.89 liters.After I fill bikes .I always run it a moment to get the oil around everywhere, but no long enough to get it hot, which will skew the measurement. I let it settle back down for a half an hour.Then check the window again. It's always lower.Then top upto mark.

Nov 04, 2009 | 2008 Husqvarna TE 610

1 Answer

Lotsof knocking no power


If the cam chain jumped then the tensioner is not tight. Timing is way off and valve hit piston. Need to **** case and replace tensioner, dry time then install new piston and pull vales to see if they are bent.

Sep 23, 2009 | 2000 Husqvarna TE 610

1 Answer

Oil light wont turn off 2007 TE 610


Your TE610 oil light wont go out.
Make sure you have the proper oil level.
Disconnect the battery for 10 minutes.

Please remember to leave me some Feedback if I've help you! Thankyou.

Jan 24, 2009 | 2007 Husqvarna TE 610

Not finding what you are looking for?
2000 Husqvarna TE 610 Logo

Related Topics:

238 people viewed this question

Ask a Question

Usually answered in minutes!

Top Husqvarna Experts

Gino Cussen
Gino Cussen

Level 2 Expert

216 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

4477 Answers

yadayada
yadayada

Level 3 Expert

60867 Answers

Are you a Husqvarna Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...