SOURCE: valve clerance for yamaha xj 650,what is the clerance of exhuse and intake?
xj650(uk) and xj650j
inlet 0.16 - 0.20mm
exhaust 0.16 - 0.20
all other models
inlet 0.11 - 0.15mm
exhaust 0.16 - 0.20mm
set when cold
SOURCE: oil blowing out of trans breather tube
hi 81 yamaha i am concerned about the fuel smell coming out with the oil. could be the carbs flooding filling your crankcase with fuel? if not it sounds like you have blow by which would cause your crank case to be slightly pressured. this is caused by worn piston rings. do not plug your crank vent. if you leave your vent open install small filter to stop dirt from entering jim
SOURCE: worshop manual for a 1981 Yamaha XJ 650
here you go buddy
http://www.pro-bike.ro/forums/index.php?autocom=downloads&showfile=681
SOURCE: How much air pressure for front forks on a Yamaha
32psi / 220kpa in the front, and 36psi / 250kpa in the rear.
:)
SOURCE: air fuel mixture too rich, how to adjust
thinc thats set in factory--be careful with ajusts u can fry an engine--buy a manual soon or some hikin shoes
154 views
Usually answered in minutes!
×