Question about 2003 Suzuki RM 125

Open Question

Suzuki jr80/ds80 cylinder head torque specs - 2003 Suzuki RM 125

Posted by Anonymous on

5 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Moto-Wiz
  • 34 Answers

SOURCE: what is the head bolt torque on a 1990 suzuki lt250r

The 8mm head bolts are torqued at 19 - 21 ft/lbs.
any smaller 6mm bolts are torqued to only 6 ft/lbs
like those on the lower cylinder.

Posted on Aug 22, 2009

  • 6 Answers

SOURCE: head bolt torque settings

8mm nut= 16.5 to19.5 lb/ft
9mm nut =21 to 24 lb/ft..

Posted on Sep 25, 2009

RJones1125
  • 373 Answers

SOURCE: I need the head ang cilinder torque specs for a

you can call the Suzuki dealer for the specs and/or buy a tech manual for that bike. (and work on your spelling, "cylinder")

Posted on Oct 09, 2009

ollie reece
  • 1167 Answers

SOURCE: i need the torque specs on a 2000 rm 250 for the

also i forgot to add pul the gasket and head in evenly

Posted on Oct 15, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Suzuki jr80 takes too long for rpm to get back down to idle , after throttle is released. wasnt run for couple yrs. completely disassembled carb and cleaned. it starts 1-2kicks.not setting correctly?


Hi, Troy and the usual suspects are:
1. Throttle cables improperly adjusted, pinched or need lubrication.
2. Idle adjusting screw needs to be backed off.
4. Air fuel mixture adjusted too lean start with 2 full turns.
5. Intake system air leak.
6. Fast idle choke ramp is not releasing.
7. Broken throttle return spring.
8. Damaged diaphragm or slide.
9. Faulty MAP, TPS, ATS, O2, sensors or wiring/connector
For more information about your issue and valuable "FREE" downloads that you will need please click on the blue links below. Good luck and have a wonderful day.
Lazy Slow Return to Idle or Erratically High Idle
2 Stroke suzuki JR80 tuning help
http://www.soemyanandarthetlwin.com/hwa/suzuki/suzuki-jr-80-service-manual.pdf
OEM parts for Suzuki
Suzuki DS80 and JR80 Motorcycle Cyclepedia Online Service Manual
Suzuki JR50 Owner Manual

May 25, 2017 | Suzuki Motorcycles

1 Answer

What are the torque settings in nm for the cyclinder head for a 1999 Suzuki rm 80 dirtbike


Hi, Martin for this scenario you will need your service/owners manual if you can't find the first and best tool you ever bought for your Suzuki, despair not, for a mere $30 you can download another one.
For more information about your issue and valuable "FREE" downloads that you will need please click on the blue links below. Good luck and have a wonderful day.
rm80 torque specs on cylinder head
96 rm 80 head bolts torque
1996 1997 1998 1999 Suzuki RM80 Service Manual eBay $30
OEM parts for Suzuki
Suzuki motorcycle and ATV owner manual

Sep 25, 2016 | Suzuki Motorcycles

1 Answer

I need the head bolt torque specs and sequence for a 2008 Suzuki reno 4 cylinder


well it's at alldata.com and at suzuki pitstop plus dot com.
here ill do that for you....
4 banger no displacement stated, now that is a challenge.


now the words..... USA car... 2.0L vin Z

Cylinder head bolts. Tighten the cylinder head bolts gradually and in the sequence shown. Tighten the cylinder head bolts to 18 ft. lbs. (25 Nm) and turn the bolts another 3 turns of 90 degrees using the angular torque gauge KM-470-B.




25750556-4duymjxl1ar05igx5z0a5r0z-5-0.jpg

Jun 17, 2015 | 2008 Suzuki Reno

1 Answer

Cylinder head torque spec 2009 GSXR 750


this has to be done with a torque gauge, you tighten the head bolts to a specific torque, then a bit more not sure of what then you use a gauge and turn the wrench quarter of a turn I think but this is just to let you know you need a torque gauge, not a wrench although you need one of them as well. JUST PHONE A DEALER MATE usually helpful.

Apr 17, 2015 | 2009 Suzuki GSXR750

1 Answer

Need head bolt torque specs for a 1996 saturn sl


Quote:





Originally Posted by norvelplagbao52

1993 saturn sl2 1.9 dohc cylinder head torque
specs and sequence
Cylinder head bolt
tightening procedure:
CYLINDER HEAD BOLT TIGHTENING SEQUENCE:

INTAKE
SIDE
8 4 1 5 9

7 3 2 6 10
EXHAUST SIDE

In sequence,
torque the cylinder head bolts. Torque: 30 Nm (22 ft-lbs).
In sequence,
torque all bolts. Torque: 50 Nm (37 ft-lbs)
In sequence, turn each bolt an
additional 90 degrees.





Originally Posted by norvelplagbao52

1993 saturn sl2 1.9 dohc cylinder head torque
specs and sequence
Cylinder head bolt
tightening procedure:
CYLINDER HEAD BOLT TIGHTENING SEQUENCE:

INTAKE
SIDE
8 4 1 5 9

7 3 2 6 10
EXHAUST SIDE

In sequence,
torque the cylinder head bolts. Torque: 30 Nm (22 ft-lbs).
In sequence,
torque all bolts. Torque: 50 Nm (37 ft-lbs)
In sequence, turn each bolt an
additional 90 degrees.

Sep 19, 2013 | 1996 Saturn SL

3 Answers

What are the specs for tourquing down a cylinder head on a 2001 suzuki ls 650. thanx, p.j.


From what I have found from here.

http://www.repairmanualclub.com/motomanuals/

http://forum.svrider.com/gallery/showphoto.php?photo=706&ppuser=21996

Mar 05, 2011 | 2003 Suzuki LS 650 Savage

1 Answer

I need the head ang cilinder torque specs for a


you can call the Suzuki dealer for the specs and/or buy a tech manual for that bike. (and work on your spelling, "cylinder")

Oct 09, 2009 | 2005 Suzuki RM 250

Not finding what you are looking for?
2003 Suzuki RM 125 Logo

Related Topics:

586 people viewed this question

Ask a Question

Usually answered in minutes!

Top Suzuki Experts

yadayada
yadayada

Level 3 Expert

75077 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

4514 Answers

Ed Nelson
Ed Nelson

Level 2 Expert

149 Answers

Are you a Suzuki Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...