Question about 2001 Hyosung RX 125

1 Answer

How do i change the headlight?

How do i check/change the front headlight bulb on my SF100 Rally?
Also are there any fuses? and if so where are they?
Cheers for the help.

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 29 Answers

I think I responded to your question but if not there should be phillips head bolt in the lastic shroud, remove them. Then there should be two bolts on either side of the headlight take them off then you should be able to turn the bulb out if not then you may have to unplug the bulb and replace the whole headlight depending on the bulb or headlight situation.

Posted on Jan 30, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

650 Bandit S high beam stopped working changed bulb but blew that one, there is burning across the back of bulb any ideas?


Hi, Tez if your headlight is not working, keeps burning out, blinking, or is dim the first thing you need to check is the headlight bulb for damaged filaments then check your light circuit fuse, then check your head light bulb socket ground wire for a clean tight connection that being said the usual suspects are:
1. Faulty ground or power supply wire to headlight bulb socket.
2. Worn down solder contacts or loose fit of the bulb base in the socket due to vibration.
3. Worn, chaffed, or broken wires in the light circuit.
4. Corroded, broken, or loose pins/sockets in wire connectors.
5. Faulty hi/lo beam switch.
6. Faulty ignition switch.
7. Fuse is good but no continuity on both sides.
8. Faulty wiring between battery positive and headlight bulb socket.
9. Weak charging alternator/generator.
10. Faulty voltage regulator/rectifier ground or overcharging.
For more information about your issue and valuable "FREE" downloads that you will need please click on the links below and for more specific information or questions at no charge please feel free to contact me at xlch@mail.com. Good luck and have nice a day.
P.S. the bottom link is a free service manual with a wiring diagram in the last chapter.
Why are my bulbs blowing
Headlight Bulb Keeps Blowing
Headlight bulb keeps blowing please help me its expensive
http://www.manualdoautomovel.com.br/areatecnica/manuais_de_motos/manuais_de_motos/manual_de_servicos_gsf650_s_2004.pdf

Jul 25, 2016 | Suzuki Motorcycles

1 Answer

Recently I bought dirt bike but sometimes don't know why the head in front of the lights on, sometimes don't bright, this is what changes?


Hi, Sally if your headlight is not working, keeps burning out, blinking, or is dim the first thing you need to check is the headlight bulb for damaged filaments then check your light circuit fuse, that being said the usual suspects are:
1. Faulty ground or power supply wire to headlight bulb socket.
2. Worn, chaffed, or broken wires in the light circuit.
3. Corroded, broken, or loose pins/sockets in wire connectors.
4. Faulty hi/lo beam switch.
5. Faulty ignition switch.
6. Fuse is good but no continuity on both sides.
7. Faulty wiring between battery positive and headlight bulb socket.
8. Weak charging alternator/generator.
9. Faulty voltage regulator/rectifier, overcharging.
For more information about your issue and valuable "FREE" downloads that you will need please click on the links below, and for specific information or questions, please feel free to contact me at xlch@mail.com Good luck and have nice a day.

Apr 12, 2016 | Motorcycles

1 Answer

Driving down the hi way at nite my front headlight went out.Bought a replacement and that does not work.Bike's signals and brake light work,engine starts,etc.Is it a fuse problem? Short?


Hi, Stephan if your headlight is not working the first thing to check is the headlight bulb for damaged filaments then check your light circuit fuse, that being said the usual suspects are:
1. Faulty ground or power supply to headlight bulb socket.
2. Faulty hi/lo beam switch.
3. Faulty ignition switch.
4. Fuse is good but no continuity on both sides.
5. Faulty wiring between battery positive and headlight bulb socket.
Good luck and have nice a day.

Nov 16, 2015 | Motorcycles

1 Answer

Head light not working I see two brown wires are hanging


Hi, Anonymous if your headlight is not working the first thing to check is the headlight bulb for damaged filaments then check your light circuit fuse, that being said the usual suspects are:
1. Faulty ground or power supply to headlight bulb socket.
2. Faulty hi/lo beam switch.
3. Faulty ignition switch.
4. Fuse is good but no continuity on both sides.
5. Faulty wiring between battery positive and headlight bulb socket.
For more information about your issue, please visit the websites below. Good luck and have nice a day.
Taotao ATM150 Evo scooter headlight troubleshooting and bulb replacement
How To Replace Headlight On Jonway Scooter
DOWNLOAD Bajaj Pulsar DTSi DTS UG 180 Service Repair Workshop Manual...
http://www.marutibajaj.com/pdf/Pulsar%20180%20ug3.pdf
http://ondoc.logand.com/d/1735/pdf

Apr 24, 2014 | 2007 Bajaj Avenger 180 DTSi

1 Answer

Changed headlight bulbs on my 2000 r1 now only the high beam works no low beam, the fuse is ok.


Hi, K you may have a faulty hi / lo beam switch if your headlight is not working, keeps burning out, blinking, or is dim the first thing you need to check is the headlight bulb for damaged filaments then check your light circuit fuse, then check your head light bulb socket ground wire for a clean tight connection, that being said the usual suspects are:
1. Faulty ground or power supply wire to headlight bulb socket.
2. Worn down solder contacts or loose fit of the bulb base in the socket due to vibration.
3. Worn, chaffed, or broken wires in the light circuit.
4. Corroded, broken, or loose pins/sockets in wire connectors.
5. Faulty hi/lo beam switch.
6. Faulty ignition switch.
7. Fuse is good but no continuity on both sides.
8. Faulty wiring between battery positive and headlight bulb socket.
9. Weak charging alternator/generator.
10. Faulty voltage regulator/rectifier ground or overcharging.
For more information about your issue and valuable "FREE" downloads that you will need please click on the links below. Good luck and have nice a day.
Weird Headlight Problem
Low beam headlights out High beam working
2000 2001 Yamaha YZF R1 Service Manual R1 Moto Data Project
OEM parts for Yamaha
http://mybikemanuals.com/yamaha/yamaha-yz-owners-manuals

Dec 18, 2012 | 2000 Yamaha YZF-R1

1 Answer

My aprillia mojito 50cc headlamp won't work


Hi, Anonymous if your headlight is not working the first thing to check is the headlight bulb for damaged filaments then check your light circuit fuse, that being said the usual suspects are:
1. Faulty ground or power supply to headlight bulb socket.
2. Faulty hi/lo beam switch.
3. Faulty ignition switch.
4. Fuse is good but no continuity on both sides.
5. Faulty wiring between battery positive and headlight bulb socket.
For more information about your issue, please visit the websites below. Good luck and have nice a day.
DOWNLOAD Aprilia Mojito 50

Sep 10, 2012 | Aprilia Motorcycles

1 Answer

Hyosung rx125 2002 headlight wont work how can i fix it


Check the fuse for the headlight in the fuse box or fuse cluster insure all wiring couplers/connectors are tight from the main loom to front sub loom

Mar 31, 2012 | 2002 Hyosung RX 125

1 Answer

I have a 2005 yamaha yzf r1 and it says the brights are on but the headlights won't come on. I have checked the fuse and changed the bulbs and they still won't work.


Hi, Tom if your headlight is not working, keeps burning out, blinking, or is dim the first thing you need to check is the headlight bulb for damaged filaments then check your light circuit fuse, then check your head light bulb socket ground wire for a clean tight connection, that being said the usual suspects are:
1. Faulty ground or power supply wire to headlight bulb socket.
2. Worn down solder contacts or loose fit of the bulb base in the socket due to vibration.
3. Worn, chaffed, or broken wires in the light circuit.
4. Corroded, broken, or loose pins/sockets in wire connectors.
5. Faulty hi/lo beam switch.
6. Faulty ignition switch.
7. Fuse is good but no continuity on both sides.
8. Faulty wiring between battery positive and headlight bulb socket.
9. Weak charging alternator/generator.
10. Faulty voltage regulator/rectifier ground or overcharging.
For more information about your issue and valuable "FREE" downloads that you will need please click on the links below. Good luck and have nice a day.
04 R1 Headlight Problem
http://www.r6messagenet.com/forums/r6-maintenance-technical/123412-headlight-not-working-bulbs-fuse-good.html
2004 2005 Yamaha YZF R1 Service Manual R1 Moto Data Project
OEM parts for Yamaha
http://mybikemanuals.com/yamaha/yamaha-yz-owners-manuals

Jul 15, 2011 | 2005 Yamaha YZF-R1

1 Answer

I have bajaj pulsar 150 DTSI digitel UG3 my bikes headlight not working i have try to solve it i have changed BCU unit and wiring harness but light not working plzzzzzzzz halp me


Hi, Hari_thotiya if your headlight is not working the first thing to check is the headlight bulb for damaged filaments then check your light circuit fuse, that being said the usual suspects are:
1. Faulty ground or power supply to headlight bulb socket.
2. Faulty hi/lo beam switch.
3. Faulty ignition switch.
4. Fuse is good but no continuity on both sides.
5. Faulty wiring between battery positive and headlight bulb socket.
For more information about your issue, please visit the websites below. Good luck and have nice a day.
Taotao ATM150 Evo scooter headlight troubleshooting and bulb replacement
Motorcycle Headlight Help
https://www.tradebit.com/filesharing.php/search/0/bajaj+pulsar+150
bajaj Auto Spare Parts List All 2013
https://www.facebook.com/media/set/?set=a.497832643584730.119398.177568422277822&type=3

Jun 11, 2011 | Bajaj FLHTCUSE Screamin Eagle Ultra...

Not finding what you are looking for?
2001 Hyosung RX 125 Logo

Related Topics:

490 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hyosung Experts

Arnie Burke
Arnie Burke

Level 3 Expert

4497 Answers

yadayada
yadayada

Level 3 Expert

63801 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21990 Answers

Are you a Hyosung Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...