Question about Motorcycles

Open Question

TRIUMPH 415T TREADMILL USER MANUAL

IT WON'T COME ON. I HAVE THE SAFETY KEY. NEED USER MANUAL

Posted by on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad
  • 1 Answer

SOURCE: I have lost the safety key for my Weslo treadmill

Hi I folded up a piece of paper several times to make it into a small rectanguler shape and inserted into the slot for the key and it worked.
The replacement key doesn't need to be magnet just small enough to fit the shap of the slot is fine.Mine was a Weslo cadence 1000 (bought in 2002)

Posted on Jan 10, 2010

Ad
  • 1 Answer

SOURCE: i have a pro form performance j4 treadmill. i

It is just plastic. You can wedge a piece into the slot

Posted on Feb 02, 2010

  • 103 Answers

SOURCE: can you get power to a treadmill without the

Hello there. Yes you actually can use a magnet. (thats all the safety key is) It will need to be strong enough to make the switch inside the console activate. I use one from a telescoping magnet used for picking up small screws (available at the big box stores) when I dont have one on service calls.
Just to let you know a refrigerator magnet will not be strong enough!
Good Luck! Tim

Posted on Feb 21, 2010

  • 1 Answer

SOURCE: I lost my safety key

I just found out I had lost my key too. I have a Merit 710T. I called the company and they directed me to their website.

http://store.horizonfitness.com/c-33-safety-keys.aspx

On the page there is a link to a chart which will tell you what key is right for your model. They are cheap, only @ $13. Not sure about S&H though. I've also heard that if the key is a magnet you MIGHT be able to use another magnet to complete the circuit. I'm going to try this when I get home to tide me over till I get my next check and order a new key.

Posted on Feb 04, 2011

  • 95 Answers

SOURCE: I have a Sportsart treadmill

I would think that it can't hurt anything to try another magnet but if you end up needing to buy another one here is one website that sells them: Sportsart TR20F safety key

Posted on Apr 18, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Do all C1800s NordicTrack treadmill models use a safety key to turn on ?


The answer is yes you need a key. You also seriously need to read the manual before you use this machine.
https://www.manualowl.com/m/NordicTrack/C-1800s/Manual/341906
and this one for why and what could possibly go wrong - for your entertainment.
https://www.youtube.com/watch?v=qNPhVVjnoC0

Jan 29, 2015 | Nordic Track NordicTrack C 1800 Treadmill...

1 Answer

I have a centaurus treadmill CF9010 and i don't know where to put the safety key to make a calibration of a treadmill. Can anybody help me pl?


downlod the instr. manual and see how to start. go to

www.fitness.manualsonline.com
normally the safety key, is in the display board down in the midlle at panel.

God bless you

Dec 10, 2012 | Exercise & Fitness

1 Answer

I have an Ifit treadmill. I was changing speeds and it turned off and won't restart. It beeps when i turn it on but no lights on console.


Power issues with ProForm treadmills fit into two categories: the power does not turn on or the power shuts off when using the treadmill. If the power will not turn on, make sure that the treadmill is plugged into a working power outlet. In addition, you should use a single-outlet surge protector for the treadmill. Single-outlet surge protectors protect the machine from any voltage changes that may occur in your home.

If the machine is plugged into a working outlet, make sure the safety key is in the keyhole on the console. If the safety key is not plugged into the machine or if it is pulled out during operation, the treadmill will not operate.

Finally, make sure the circuit breaker located on the frame near the power cord is set to "Reset." The circuit breaker is set to "Reset" if the top of the button is pushed in. When the breaker is tripped, push it back to the "Reset" position and wait five minutes before powering on the treadmill.

If the ProForm treadmill shuts off during operation, check the power cord and circuit breaker as described above. You can also try removing and reinserting the safety key.

Increase Engine Horse Power.

Jun 02, 2012 | Proform Exercise & Fitness

1 Answer

Need owners manual for a tempo 632T treadmill


Says to lube belt did that but still saying lube belt. Won't run when the safety key is put in

Feb 20, 2012 | Life Fitness Exercise & Fitness

1 Answer

My ultrafit treadmill won't run-the control panel


2_15_2012_4_45_37_pm.gifAdjust the reed switch as indicated by the diagram by 1/8- 1/4". Run the calibration software instruction under the Hood motor or see your user manual.

sincerely.
ernesto cuadra
managua, nicaragua. c.a.

Feb 13, 2012 | Exercise & Fitness

1 Answer

Incline reads 0.0 but is not all the way down


Renee, Here is how to recalibrate the incline motor. Read all of it It will be good to keep.
Plug in your treadmill, do not stand on the walking belt. Hold down the "Stop" and "Speed +" key and insert the safety key or magnet, let go of the two keys. Now press "Stop" key once. This puts you into the level 2 of calibration. Press the "Speed +" key slowly until you see 85 on the console, (at this point the display is going to show the percentage of motor usage and also the actual walking belt speed) at 85% motor usage your top speed should be between 10 and 10.5 MPH or (of 12 and 12.5) depending on the treadmill. You must know your treadmills top speed. (Important the motor may be damaged if you set the maximum speed higher than the maximum speed that your treadmill is made for). If the speed is higher than 10.5 or 12.5 then you need to turn the potentiometer down to the correct level. If the speed it to low you need to turn the potentiometer higher. Once the speed is correct you are done calibrating the speed. Press the (-) speed key to lower the percentage to (0). Next press the incline (+) button, this will make the incline motor go all the way to the maximum incline and come all the way down to the level position. Then remove the safety key and the treadmill will reset into the normal manual mode, when you re-insert the safety key. Matt

Dec 04, 2011 | Nordic Track NordicTrack Treadmill, A2550

1 Answer

Treadmill rubber tread has strong odor


Turn off and unplug the unit before making any adjustments. Check the belt alignment on the treadmill. If the treadmill is making noise or you smell burnt rubber, the belt may be loose or out of alignment. There should be a belt roller on the side or the front of the unit. You can use a hex wrench or an adjustable wrench to loosen the belt so it can be properly aligned. Make sure you tighten the belt so it does not rub against the machine. Consult the user manual for specific instructions in adjusting the belt.

  • 2 Reposition the heart rate monitor. If the monitor does not show a reading, it may need to be repositioned. The monitor should be placed against your skin so the sensor is facing toward your body and the HealthRider logo is facing away from you. The monitor will only work if you stay on the treadmill, walking in the middle of the belt.
  • 3 Test the hand grip monitors for a correct reading. These are the metal plates that are secured to the hand railing. If the plates are dirty, they may not function correctly. Wipe them clean with a damp cloth. Your palm will need to wrap completely around the plates at all times for a proper reading.
  • 4 Reset the unit if the treadmill still does not function correctly. Unplug the unit from the electrical outlet. Leave it unplugged for about one minute and then turn the machine back on. Remove the safety key from the treadmill and reinsert it into the key slot. Taking out the key will reset the unit, clearing all memory and resetting it to factory defaults.
  • Nov 09, 2011 | Exercise & Fitness

    3 Answers

    Is it possible to operate a Nordic track A2550 treadmill without the key? If so, how?


    First thing I'd try is just using any magnet. I'm sure that's all the key is normally. If that doesn't work, no you cannot use a treadmill without a key. It's a safety measure created by the company.
    Here's the key for sale on amazon that goes to your treadmill.
    http://www.amazon.com/Pro-Form-Treadmill-Safety-Key/dp/B002YP4KQE
    Hope this helped!

    Jun 18, 2011 | Exercise & Fitness

    1 Answer

    My Bowman treadmill 7 series stopped working. It just shows 2 words: safe out. Please help.


    Make sure the magnetic safety key ('safety pull' or 'emergency stop magnet') is in place. SAFE OUT indicates that the safety key is not in position or is otherwise not working properly.

    For more information consult the following manuals:

    http://download.dfxi.com/supportdocs/OM/Bowflex/BFX_TM3-5-7_OM_RevD_web.pdf

    http://www.pdfstock.com/bowflex-3-5-7-series-treadmills-assembly-manual-pdf.html

    May 05, 2011 | Bowflex Treadmill Series 7

    Not finding what you are looking for?
    Motorcycles Logo

    Related Topics:

    113 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Motorcycles Experts

    Arnie Burke
    Arnie Burke

    Level 3 Expert

    4521 Answers

    yadayada
    yadayada

    Level 3 Expert

    76109 Answers

    kakima

    Level 3 Expert

    102366 Answers

    Are you a Motorcycle Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...