Question about 2000 Triumph Daytona 955i

1 Answer

What is the brake fluid type? - 2000 Triumph Daytona 955i

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Contributor
  • 22 Answers

The cap of your brake fluid reservoir should say, but it is probably DOT4.

Posted on Oct 19, 2013

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2002 Chrysler town and country, always had soft brake pedal, replaced calipers and master cylinder bled brakes several times problem still there, suddenly pedal got full but brakes started dragging.


A soft or spongy brake pedal is an indicator that there is air in the hydraulic line(s) of your brake system.
Improper bleeding could be a cause.
Damaged or malfunctioning master cylinder could be another cause...
Damaged, crimped, or pin hole leak in the brake line...
Leaking or damaged wheel cylinder...
Poorly adjusted brake calipers...
Using the wrong type of DOT brake fluid...
Using brake fluid from a previously opened container that has been sitting around for more than 6-months (DOT type 3 and type 4 are glycol-based fluids that absorb water).

Feb 22, 2017 | Chrysler Cars & Trucks

1 Answer

Where is the clutch fluid reservoir on a 2006 toyota corolla


The brakes and clutch share the brake master cylinder reservoir,and a line from clutch master cylinder goes to the brake reservoir and it takes brake fluid,dot 3 type.

Jan 19, 2014 | 2006 Toyota Corolla

1 Answer

What dot 3 fluid


Dot 3 fuid is a specific type of brake or hydralic clutch fuid. Most manufacturers require you to use a specific brand or make of brake fluid or hydralic clutch fluid when servicing their vehicles, Dot 3 is a type of Brake Fluid use by many.

Oct 07, 2012 | 1995 Isuzu Rodeo

2 Answers

1993 Honda Accord Brake Fluid Type. What type of brake fluid is good for my 1993 Honda Accord - DOT 3 Synthetic or Mineral.


Hi,
Just use a normal DOT-3 brake fluid! Just always check the color and level of the fluid!
If it is dirty( black ) u need to drain the whole system and put in a new DOT-3 brake fluid!

Jun 14, 2011 | 1993 Honda Accord

1 Answer

Rear brake fails ,when mashed ,there is NO brake...


Find your rear brake master cylinder. The find the metal line that comes out of the rear of the master cylinder. Follow this line all the way back to your rear brake caliper. Look for broken lines or leaks. Check your rear brake master cylinder reservoir to make sure you have brake fluid in it. Fill the reservoir with the recommended type of fluid. The proper type of fluid is printed on the top cover for the reservoir. Never mix the different types of brake fluid, they are not compatible. Once you fill the reservoir, you must bleed the brakes.

To bleed the brakes, you perform the following steps in this exact order. First, slowly depress and release the rear brake pedal a few times. Then, press the rear brake pedal and hold it. Open the bleeder valve on the caliper and allow all air or brake fluid to escape. Close the bleeder valve. Release the brake pedal and again depress and hold it down. Open the bleeder and allow the air and fluid to bleed out. Close the bleeder valves. Release the brake pedal. Check the level of the brake fluid in the reservoir. Do not allow the reservoir to run dry. If you still don't have a good brake pedal, continue to bleed the brakes until you get brake fluid with no air bubbles in it.

If after you have thoroughly bled the brakes you cannot get a pedal, you either have a mechanical problem with the brake pedal or the master cylinder needs rebuilding.

Good Luck
Steve

Feb 08, 2011 | 2008 Harley Davidson FLHRC Road King...

1 Answer

How do i bleed rear brakes on 2006 heritage classic


First, remove the top cover from the rear brake master cylinder. Check the fluid level height. Make sure you're using the correct type of brake fluid. It's written what type to use right on the reservior top cover. Do NOT allow the reservior to run dry during the brake bleeding process and be careful with the brake fluid, it can damage your paint. Check the fluid level and temporarily replace the top cover on the master cylinder by just laying it on top of the reservior.

Now, to bleed the brakes you must do the following steps in this exact sequence.
  1. Depress the rear brake pedal and hold it down
  2. Open the brake bleeder valve on the rear caliper
  3. Allow air and brake fluid to bleed out
  4. Close the bleeder valve
  5. Release the brake pedal and allow the cylinder to refill for a short time.
  6. Check fluid level
  7. Repeat if the brake pedal is not high and firm.
Good Luck
Steve

Sep 23, 2010 | Harley Davidson FLSTC Heritage Classic...

2 Answers

My brake light has started coming on? Does that mean that the brake fluid is low? The brakes are not making any noise and they seem to be stopping ok.


Probably. If flushing and replacing the fluid (not just topping off) doesn't help, then take it to a mechanic.

Feb 10, 2010 | 1993 Ford Crown Victoria

1 Answer

Brake Fluid Type? 2000 KIA Sephia


any aftermarket brake fluid will be fine. the actual grade is located on the top of the fluid cap. you can find the universal grade at your local auto parts shop.

Mar 01, 2009 | 2000 Kia Sephia

Not finding what you are looking for?
2000 Triumph Daytona 955i Logo

Related Topics:

35 people viewed this question

Ask a Question

Usually answered in minutes!

Top Triumph Experts

Arnie Burke
Arnie Burke

Level 3 Expert

4514 Answers

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Are you a Triumph Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...