Question about 2011 Honda CBR1000RR ABS
Procedure in bleeding honda cbr 1000rr abs brakes@
Posted by Anonymous on
Hi, Anonymous for this scenario you will need your service manual, parts fiche, and owners manual if you can't find the best tool you ever bought for your Honda, despair not, for a mere $15 you can download another one.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
How to bleed brakes on Motorcycle with ABS or after installing stainless...
HONDA CBR 1000RR FIREBLADE 2008 11 WORKSHOP SERVICE MANUAL Download... $15
Honda 2009 CBR1000RR Owner Manual
Posted on Nov 01, 2017
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get to try the service completely Free afterwhich it costs $6 per call and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
horsepower is 178. The US spec version of the 2008 1000RR has a limitation above 10,200 rpm that reduces rear wheel horsepower to approximately 155. The UK version of the motorcycle makes about 10 more horsepower with a normal curve above 10,200 rpm as opposed to the US version which is essentially flat from 10,200 rpm to 13,000 rpm.
Posted on Nov 10, 2008
Needing new valves is highly unlikely. Your bike is only 5 years old.
Before doing anything else, run through a tank of premium gas. If the rattle goes away then a bit of pre-ignition was present. If the rattle is still there, take the bike to a dealer and ask them to reset the cam chain tensioner and set the valve clearances also. This may cost $150 or so. Chances are that if the knocking is still present, you are hearing piston slap. This would require new pistons, rings and probably fresh cylinder bores. Have the shop re-seat the valves while the top end is torn down. Ask the dealer as to cost before handing over the bike.
Posted on Jul 28, 2009
check your key it has a chip in side it and it may be faulty try your spear and i know it sounds silly but just make sure your kill switch is set to run check the hiss fuse under the seat also swap your fuel pump relay with the fan one the fuel pump relay has brown wires going to it and the fan has black and blue if you have an alarm on it it will be worth checking that make sure that the fuel pump is pluged in under the tank take a look at the hiss light does it go out wen the bike is switched on if it stays on you have a HISS problem any problems let me know and i will do my best to help
Posted on Nov 02, 2009
Hi and welcome to FixYa,
Initially, check would be to determine if the fuel pump is priming.
Offhand, if the fuel pump is not working at ignition ON, possibilities are:
On the other hand, if the pump is working, then check for the absence / presence of spark at the plugs.
Good luck and thank you for asking FixYa.
Posted on Nov 13, 2009
Tips for a great answer:
Jun 01, 2017 | 2004 Honda CBR 1000 RR Fireblade
May 20, 2016 | Honda Motorcycles
May 02, 2016 | 2006 Honda CBR 1000 RR Fireblade
Jul 24, 2014 | 2009 Freestyle Ingenuity Honda CBR 1000RR...
Apr 25, 2014 | 1998 Honda CBR 900 RR Fireblade
Jan 31, 2014 | 2010 Honda CBR1000RR ABS
Apr 11, 2013 | 2004 Honda CBR 1000 RR Fireblade
Oct 28, 2010 | 2005 Honda CBR 1000 RR Fireblade
Jan 17, 2010 | 2007 Honda CBR 1000 RR Fireblade
Nov 10, 2008 | 2008 Honda CBR 1000 RR Fireblade
23 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: