Question about 2008 Suzuki GSX 1300 R Hayabusa

1 Answer

Hayabusa lazy starter - 2008 Suzuki GSX 1300 R Hayabusa

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that got 20 achievements.


    An expert that got 10 achievements.


    An expert that got 5 achievements.

  • Expert
  • 314 Answers


    • 1 Remove the rear cowl using the ignition key. Use the 5mm Allen key to remove the two bolts securing the seat to the frame. When the bolts are out, lift up at the back and remove the seat.
    • 2 Remove the prop fuel tank prop rod from the rear storage area. Lift the back of the fuel tank and support it with the prop rod.
    • 3 Unplug the fuel injector wiring harness connector. This is a white connector that has wires coming from the fuel rail and connects to the main wiring harness.
    • 4 Locate a spot in the rear storage area to mount the Power Commander unit. Clean the spot using brake cleaner and a rag. Mount the Power Commander unit to the spot using the Velcro tape supplied with the Power Commander.
    • 5 Route Power Commander's wires along the frame rails towards the front of the bike. The wires from the Power Commander have two connectors. Plug each connector from the Power Commander to the white connector you unplugged in Step 3. The connectors will only plug into each other one way.
    • 6 Lower the fuel tank and reinstall the seat. Start the engine and follow the procedures for programming the Power Commander according to the instructions in the manual.

Posted on Jan 20, 2013

1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Starter fuse location on a 08 Hayabusa

Hi, Michael starters do not have fuses they have relays for this scenario you will need your service/owners manual if you can't find the first and best tool you ever bought for your Suzuki, despair not, for a mere zero $ you can download another one. For more information about your issue and valuable "FREE" downloads that you will need please click on the blue links below. Good luck and have a wonderful day.
Starter relay location on 08 Hayabusa Google Search
Starter switch relay Problems
Suzuki GSX1300R Manual
OEM parts for Suzuki

Mar 26, 2017 | 2008 Suzuki GSX 1300 R Hayabusa

1 Answer

2001 hayabusa 1300 my starter spins gear but won't crank over what could be the reason any help

Hi, Adrian the starter drive/Bendix/clutch is a mechanical gear driven component that engages the clutch pack ring gear to turn over the engine. It has an internal mechanism that allows the gear to turn in one direction and once the engine starts allows the drive gear to free spin. If gear free spins in both directions then the drive gear has failed, it is not serviceable and needs to be replaced.
For more information about your issue and valuable "FREE" downloads that you will need please click on the blue links below. Good luck and have a wonderful day.
hayabusa starter clutch install
Suzuki GSX1300R Manual
OEM parts for Suzuki
Suzuki GSX1300R Owner Manual

Mar 12, 2017 | 2001 Suzuki GSX 1300 R Hayabusa

1 Answer

Hayabusa 09 getting no power, batt is good, fuse all good but now power

Hi, Kelvin and the usual suspects are:
1. Ignition Switch not in the "ON" position.
2. Engine Run Switch in the "OFF" position.
3. Discharged battery, check battery terminals for damage or corrosion, check the battery cables at "BOTH" ends for loose, corroded, or broken connectors, "INSIDE" and outside the cable harness, perform connector wiggle test and check cables with an ohmmeter if necessary.
4. Bank angle sensor tripped and ignition/light key switch not cycled to the "OFF" position and then back to the "ON" position.
5. Security alarm needs a reset.
6. Starter control circuit, relay, or solenoid faulty.
7. Faulty starter button.
8. Electric starter shaft pinion gear is not engaging or over-running starter clutch slipping.
For more information about your issue, please visit the websites below. Good luck and have nice a day.

Aug 06, 2015 | 2009 Suzuki Hayabusa 1340

1 Answer

2000 hayabusa starter relay clicking

It's either a faulty starter or the coil.,maybe /cdi.,? ., try tapping the starter while cranking it over,it may engage and start., if it starts when u hit it.,.it's the starter going bad for sure.,, if not ,may still be starter being all the way Dead ,or other things i listed ??

Jun 30, 2015 | Motorcycles

1 Answer

How to remove starter for Suzuki hayabusa

On the left side of the engine up to Crankcase is starter motor is engaged with the two bolts to the motor housing.With socket number 10 will develop two screws and pull the starter to the left side.

Sep 28, 2014 | Suzuki GSX 1300 R Hayabusa Motorcycles

1 Answer

When I first start my hayabusa it runs fine after riding for a while and cut off it will ot crank up unless kick start

I saw a lot of these problems on the net and it seems that you need to re-wire your cables from your starter to your battery.
Here is a hefty link. Very detailed.

Hopefully this helps your problem!


Apr 05, 2013 | 2000 Suzuki GSX 1300 R Hayabusa

1 Answer

05 Hayabusa Starting Problem

bypass the starter solenoid crossing the 2 bolts, does this turn the starter motor?

Feb 20, 2013 | 2005 Suzuki GSX 1300 R Hayabusa

1 Answer

Tried to start my bike with new battery and only the lights come on and a single click come from around the battery area and the lights dim. on a 2003 suzuki 1300 hayabusa.

The starter button is supposed to turn the headlight off when you press it. The click says that the solenoid is being activated. Therefore the button works. Follow the positive battery cable to the starter solenoid. Now short across the two terminals or touch the battery cable to the starter cable, if the starter works you have a bad solenoid. Push the starter button and tap on the starter with a plastic hammer. If this causes the starter to work your starter brushes are worn out and need to be replaced. If anything else is wrong with the starter you will have to replace the assembly I'm pretty sure Suzuki only sells the brushes and gaskets but no armatures, barrels,bearings,etc.

Mar 08, 2011 | 2003 Suzuki GSX 1300 RZ Hayabusa

1 Answer

Engine won't turn over and guages don't work with a hot battery.


Jan 29, 2010 | 2006 Suzuki GSX 1300 R Hayabusa

Not finding what you are looking for?
2008 Suzuki GSX 1300 R Hayabusa Logo

128 people viewed this question

Ask a Question

Usually answered in minutes!

Top Suzuki Experts


Level 3 Expert

75066 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

4514 Answers

Ed Nelson
Ed Nelson

Level 2 Expert

149 Answers

Are you a Suzuki Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides