Question about 2005 Yamaha FZS 1000 Fazer

2 Answers

Error code, rev needle goes to 7000, what dose it mean

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.


    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

The needle jumoing to 7,000 on the RPM dial means that the EXUP valve is stuck. This is a common problem with Fazer 1000's. Although Yamaha don't recommend any maintenence I strip and clean mine regularly to stop it from sticking. According to Yamaha - a sticking valve is not a serious problem and the bike can be ridden until you get time to fix it.

Posted on Feb 15, 2009

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that got 5 achievements.


    An expert who has written 50 answers of more than 400 characters.


    An expert whose answer got voted for 20 times.

  • Expert
  • 126 Answers

Jumping to 7000 is an error code on this bike. i believe this means the throttle position sensor (TPS) needs to be adjusted.

Posted on Jan 27, 2009

1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

My tachometer doesn't show rpm? Why?

the only fix is to replace it .

Sep 28, 2015 | 1999 Yamaha YZF-R1

1 Answer

My yam ybr 125 will not rev out fully. in top gear at 50 mph 7000 revs that's it . the spark plug looks lean more white ish .but all setting are to the manual .thanks

Hi, Anonymous and the usual suspects are:
1. Severely drained or faulty battery.
2. Faulty regulator/rectifier or high output coil.
3. Faulty power valve, solenoid or installation.
4. Clogged air filter or exhaust.
5. Cracked or incorrect float level.
6. Float needle is not seating.
7. Faulty reed valve.
For more information about your issue and valuable "FREE" downloads that you will need please click on the links below. Good luck and have a nice day.
03 TTR 125 won rev but idles fine TTR
bike will not rev past 8k like hitting the rev limiter
YAMAHA YBR125 Owner Manual
OEM parts for Yamaha

Aug 29, 2013 | 2006 Yamaha Ybr 125

1 Answer

How do i lower the throttle pin on 2001 ktm 300 exc

if you need you bike jetted for 7000, take it to a shop and have it jetted.
If you dont understand your carburetor and make the wrong adjustment you can lean out and blow up the engine.
when you jet a bike for 7000, you need to change everything, main jet, idle jet, idle mixture, idle, and needle position.

Apr 15, 2013 | 2001 KTM EXC 300

1 Answer

My Yamaha r1 1998 rev counter goes back to 0 when the throtle is open to the max, but back it up a bit and it goes back to where it should indicate. The bike is running normal, even if the tachometer goes...

it is your exup valve it may be sticking or a cable has snapped it does it a lot on r1s it has 3 fault codes rev needle goes to 7 for exup valve 3 for some thing eles and 4 for another fault

Aug 15, 2012 | 1999 Yamaha YZF-R1

1 Answer

F1 CODE ON PERMANENT REV TO 7000 RPM WHEN IN GEAR THATS AS FAR AS IT REVS i to gte the red light and FI codes hope this link can help

Feb 11, 2011 | Suzuki GSX-R 1000 Motorcycles

2 Answers

The rev counter goes from 0 to 7000 revs then back to 0

that is the indication of the exup valve malfunctioning. it tosses the code of 7000 rpm for a few seconds on start up to let you have an indication that there is a problem.

Mar 29, 2010 | 2000 Yamaha YZF-R1

1 Answer

I have a thunderace and the rev counter keeps jumping from 0 t0 7000 revs

7000 rpm is a self diagnostic code that either your exup valve is not being detected or the valve is locked up and not moving. If you put a header on your bike and took over the exup valve servo motor, you are going to have to put it back on. It also changes the mapping of the ECU and will not let it rev to redline when the Exup servo motor is missing.

Oct 06, 2009 | 1997 Yamaha YZF Thunder ace 1000 R

2 Answers

My 1999 R1 rev counter just shoots upto 7000 when on tickover

Its a self diagnostic feature. It is telling you either the TPS is unplugged, the fuel level sensor is unplugged, or the EXUP valve is unplugged or frozen and not moving.

Jun 27, 2009 | 1999 Yamaha YZF-R1

Not finding what you are looking for?
2005 Yamaha FZS 1000 Fazer Logo

1,011 people viewed this question

Ask a Question

Usually answered in minutes!

Top Yamaha Experts

D. E. Hev

Level 3 Expert

1132 Answers


Level 1 Expert

47 Answers


Level 2 Expert

231 Answers

Are you a Yamaha Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides