Question about kawasaki Mach III H 1A Motorcycles
Just cranked rode up the road turned key off went back 10 minutes later turned key to start adn nothing happened. checked to assure it was in nutrual and it was. it makes no sound at all.
Posted by Anonymous on
a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: CBR250RR wont start
hi buddy you can bump it to get bikes going in 2-3gear just go down the hill and let the clutch out also the thing clicking is the starter solenoid buy one from ebay or some sort and replace this one
Posted on Sep 11, 2009
Using a lighter viscosity engine oil can make all the difference. Try something on the order of a 5W-30 for ambient temperatures of 60F or below. Of course, it could also be that your starter solenoid is in the early stages of failure. You can easily check it by using a large screwdriver to bridge the two large cable connections on the top of the solenoid. If the starter spins when you do this, then the solenoid is bad.
Posted on Dec 07, 2009
The click you heard was probably the sound of the main fuse popping. To locate it, just follow the positive cable from the battery to the starter solenoid. There is where you will find the main fuse ( usually a 30 amp fuse. Make sure your battery is connected properly.
Posted on Jan 07, 2010
check the battery cables where it bolts to the battery, frame , and starter solenoid, ( follow the cables from the battery)
make sure they are all clean and tight
Posted on Apr 30, 2010
Tips for a great answer:
Jan 21, 2017 | kawasaki 2010 Mule 610 4x4
May 29, 2016 | kawasaki Motorcycles
Aug 13, 2015 | kawasaki 2010 Mule 4010 Trans4x4 Diesel
Aug 28, 2014 | Motorcycles
If you have a vent hose coming out of your gas cap make sure it is not kinked. A kink in the hose will cause a vacuum in the gas tank and very slow gas delivery to engine, which would become apparent at higher engine rpms including after warm-up.
Mar 17, 2014 | kawasaki 2011 Mule 610 4x4 XC
Jul 30, 2017 | 2003 Chevrolet Malibu
Aug 14, 2012 | kawasaki Motorcycles
Sep 06, 2011 | kawasaki Mach III H 1A Motorcycles
66 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: