Question about Motorcycles
Posted on Jan 20, 2013
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
Hi and welcome to FixYa,
Initially, determine if there is a clicking sound when the START button is pressed. The click is significant. If there is, this indicates that the starting relay is engaging but for some reason, the starter motor is not cranking. This could either indicate a faulty starter relay (particularly the contacts) or a faulty starter motor (specifically, the carbon brushes). To determine which:
Posted on Feb 22, 2009
depends on if choke piston is moving free an not seized if stuck need to remove carb an soak it with no plastic or rubber parts in carb cleaner
Posted on Apr 17, 2009
Check to see if you are getting any spark to the plug. You can get the testers for a few buck at Auto Zone (spark plug cable inserts into it and then you push the contact pin into the cable) when you kick start the bike the tester should light up, if it doesn't you may have a bad coil or the wiring to it may be loose/disconnected.
Posted on Jun 06, 2009
as CBZ is already a old bike now..!!
black smoke is emitted in following reasons.,\
when engine is damaged, engine oil is burnt.
when silencer as to cleaned
when fuel is of bad quality
these are of priority order,
I hope there is a engine problem...
sir plz check ur engine oil level...does it get over in about 1500kms ?? if so..then sure engine problem
thank u sir..
plz vote me/ if my suggestions r worth
Posted on Jul 20, 2009
SOURCE: my honda activa doesn't start
First of all it is for sure that water had seeped into your electricals. So open the covers and wipe dry the coils, the wires to the plug, the wires to the ignition unit. make sure that there is no water in your fuel.remove the plug with the plug spanner supplied.Kick or use the starter to check for the spark on the plug ( which was also cleaned). If no spark then check again on the ignition system, the coils the contacts to confirm the fault. After a good spark is seen fit it back again and start. It must start for sure.Other wise repeat the process. I hope you get this right. Good day
Posted on Aug 04, 2010
Tips for a great answer:
Apr 28, 2014 | 2005 Honda Activa
Apr 24, 2014 | 2005 Honda Activa
Jul 09, 2013 | Motorcycles
Jun 25, 2011 | 2005 Honda Activa
Jan 25, 2011 | 2005 Honda Activa
Jan 09, 2011 | 2005 Honda Activa
Nov 04, 2010 | 2005 Honda Activa
Jun 05, 2010 | 2005 Honda Activa
Apr 28, 2010 | 2005 Honda Activa
Mar 16, 2009 | 2005 Honda Activa
137 people viewed this question
Usually answered in minutes!