Question about kawasaki KX 125 Motorcycles

1 Answer

Witch way do the grooves go on clutch on 87 kx125

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Expert
  • 314 Answers

Instructions

  1. Street Motorcycles
    • 1 Mount your Ninja or Eliminator motorcycle and lift it off of the kickstand. Insert the key into the ignition and turn it to the "ON" position.
    • 2 Reach down to the base of the fuel tank with your left hand and turn the fuel valve, or petcock, to the "ON" position. This will place the fuel valve lever in the 6 o'clock position.
    • 3 Place the engine kill switch on the right handlebar into the "RUN" position.
    • 4 Pull in the clutch lever and depress the starter button on the right handlebar to start the motor.

Posted on Jan 20, 2013

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

125cc Kawasaki dirt bike, cranks on first kick, idles but won't run in any gear, doesn't die out but doesn't seem to engage gear, possible problems?


Does it jerk forward when you put it into gear and die? Or you put it into gear and the bike doesn't move when you let the clutch out? Badly adjusted clutch in both cases. Worst case, you need new clutch plates and springs.

Mar 25, 2017 | kawasaki Motorcycles

1 Answer

Witch way to turn to remove fan clutch on f350 6.7


If the fan pulley is smooth, turn counterclockwise to remove fan. If pulley is grooved, turn clockwise to remove fan.

Dec 18, 2016 | Cars & Trucks

1 Answer

Thrust bearing install direction


groove towards the spinning part; flat on stationary.

Mar 22, 2013 | Cars & Trucks

1 Answer

The torque specs on the clutch springs on a 98 kx 250


Manual for 99-2002 KX125/250 says 8.8N-m 0.9 kgf-m or 78 in-lb
Torque in stages in a criss-cross pattern---I hope this helps.

Jul 06, 2011 | kawasaki GT650S Sport Comet 650 S...

1 Answer

The a/c clutch wont engage


Did you try jumping where the Clutch relay plugs into the fuse/relay box ? Pin 87 & 30 are the compressor clutch coil power supply . If you look on the bottom of the relay you will see four set's of numbers 30 & 87 , 85 & 86 . If you take a piece of wire an jump 30 to 87 this will send B+ voltage to the clutch coil engaging the compressor . Is the PCM turning on the relay ?
The Trainer 40 When the compressor won compress

Jul 29, 2017 | 1998 Chrysler Town & Country

2 Answers

2002 kx125 no spark


its prob your magnito with out a good connection to magnito it wont spark at all,could also be spark plug wire



My bike,
Kx125

Dec 21, 2009 | 2003 kawasaki KX 125

1 Answer

Kx 125, wont select gear


Chris make sure that you have put the brass washer back on the drain plug the tolerances of the 03's were so tight that the drain plug going into the case even that tiny extra amount will affect shifting and clutch performance Good Luck

Oct 20, 2009 | 2003 kawasaki KX 125

2 Answers

1987 kx125 clutch wont engage


push rod bent ? too short ?

Aug 06, 2009 | 2003 kawasaki KX 125

2 Answers

2003 KX125 Clutch Problem


the clutch springs may be weak check the specs you may just have to change them

Jan 15, 2009 | 2003 kawasaki KX 125

Not finding what you are looking for?
Motorcycles Logo

Related Topics:

78 people viewed this question

Ask a Question

Usually answered in minutes!

Top kawasaki Experts

Arnie Burke
Arnie Burke

Level 3 Expert

4514 Answers

yadayada
yadayada

Level 3 Expert

75117 Answers

Gino Cussen
Gino Cussen

Level 2 Expert

216 Answers

Are you a kawasaki Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...