Question about 1983 Honda GL 1100 Gold Wing
1983 Honda no spark. Spark come out engine up to the Cdi that's is brand new . But I have no. Spark come out of Cdi to ignition coil (new) what color wire should it come out on ? To lead to ignition coil Is it continuously power or pulse? K if u can answer that maybe u can answer this to. My key switch is out what wires need to be together to run . Red and red yellow. Black and the green.
Posted by Anonymous on
Hi, Anonymous and the usual suspects are:
1. Fouled spark plugs.
2. Severely discharged or a damaged battery should have 12.5 volts or more and be able to pass a proper "LOAD" test if necessary, you may have a preliminary reading of 12.5 volts or more but little or zero amperage the battery is faulty and must be replaced, AGM batteries fail in this scenario more so than lead acid batteries.
3. Check battery terminals for damage or corrosion, check the battery cables at "BOTH" ends for loose, corroded, or broken connectors, "INSIDE" and outside the cable harness, perform connector wiggle test and check cables with an ohmmeter if necessary.
4. Loose connection at ignition coil or plug between ignition sensor and module.
5. Spark plug cables in bad condition, shorting/leaking, spark plug cable connections loose check for spark leakage in the dark.
6. Faulty ignition coil or electronic control module.
7. Faulty pulse coil.
8. Faulty CKP, CMP, or BAS sensor.
9. Faulty ignition switch.
10. Tilt sensor needs a reset.
11. Security alarm failing to disarm needs reset
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
1980 1100 no spark to plugs GL1100 Information Questions goldwingdocs com
GL1100 No Spark HELP
Honda GoldWing GL1100 Service Manual
Honda Gold Wing GL1100 Owner Manual
Posted on Aug 18, 2017
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: No spark
Check the side stand kill switch if your bike has one. It kills the engine so that you don’t start out with the side stand down. If broken or out of adjustment, it would kill the spark. Check for a broken wire at the side stand switch and coupler. Try moving the kill switch by hand. If that doesn’t work then wire a jumper around the switch to bypass it. Check the fuses. How good is the battery? Try a jump start from your car battery. Is the handlebar kill switch on? Check the operation of the ignition switch and all kill switches with a volt ohmmeter. Install new spark plug.
If that doesn't do it, check the wiring harness. Did a wire come unplugged? Are all wires clean and with solid connections? Any abraded or pinched wires? Is the bike in neutral and the neutral light is lit up? If no neutral light, check the neutral switch and neutral switch wire on center casing. If still no spark, get CDI system and coils checked at the dealers shop. You can screw up a CDI unit checking it yourself.
Posted on Jun 18, 2009
Hi and welcome to FixYa,
The voltage on the green wire must be pulsating when cranking/starting the bike, not steady. Confirm by similarly testing the voltage on the black wire on the left ignition coil. If the green still reads a constant voltage, then the CDI is faulty; to be more specific, most likely that the switching tansistor inside the CDI that drives the right ignition coil has shorted.
Good luck and thank you for asking FixYa.
Posted on Jul 10, 2009
Find an inductive pickup indicator for spark. Place on distributor cap to see if spark is at coil internal tower. If no spark at internal tower, look at ignition module or pickup coil. Ignition modules are prone to failure on 626's. But if you have spark at tower but not at the wire end, then your rotor is gone.
Posted on Aug 18, 2009
The above site has full diagrams for the whole bike (1971 DT1E), diagr. below from site shows elec. components, hope it assists you.
Posted on Apr 27, 2010
Tips for a great answer:
Jul 10, 2014 | 1983 Honda GL 1100 Gold Wing
Dec 01, 2012 | 1983 Honda GL 1100 Gold Wing
Jun 18, 2012 | 1983 Honda GL 1100 Gold Wing
Mar 28, 2012 | 1981 Honda GL 1100 Innerstate Gold Wing
Oct 07, 2010 | 1983 Honda GL 1100 Aspencade Gold Wing
Jul 31, 2010 | 1983 Honda GL 1100 Innerstate Gold Wing
May 08, 2010 | 1983 Honda GL 1100 Innerstate Gold Wing
Apr 25, 2010 | 1983 Honda GL 1100 Aspencade Gold Wing
Mar 04, 2010 | 1983 Honda GL 1100 Aspencade Gold Wing
Jul 09, 2009 | 1983 Honda GL 1100 Aspencade Gold Wing
26 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: