Question about 1992 Yamaha FZR 600

1 Answer

How many links in the chain - 1992 Yamaha FZR 600

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Yamaha Master
  • 39,939 Answers

Hi, Gary for this situation I would call my local dealer or reputable shop's service/parts department and inquire about any possible quick fix, answers, or parts inquiry. If necessary, transport your bike to the dealer or shop and have a professional technician take it for a test drive, if it is in running condition, and give you a written estimate of repairs and answer any specific questions you may have about your problem. For more information about your issue and valuable "FREE" downloads that you will need please visit the websites below. Good luck and have a nice day.
530 vs 520 chain The FZR Forum
OEM Chart
https://www.tradebit.com/filedetail.php/269137237-yamaha-fzr600-1989-1999-factory-service-repair-manual
OEM parts for Yamaha
http://www.fzrarchives.com/fzr600/600_manual/1999fzr600r.pdf

Posted on Mar 24, 2016

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Bike chain broken, how to fix this?


Sometimes all it takes is a master link or "quick link," but you can't count on that. How to fix it depends on several factors. There are different chains for the various number of cogs/gears on the rear of the bike, and an older chain may require a different procedure than a newer one. Further, if the chain is badly worn it may need to be replaced, but then may not mesh well if the gears aren't replaced as well. Finally, just taking out the rest of the link (one full link is one outer and one inner) may make the chain too short, which could damage the bike.

It's best to take the chain and bike into a bike shop, or a bike co-op if there's one available. If you really want to know all the in's and out's see this link: Chain Maintenance

Oct 31, 2016 | Cycling

2 Answers

I have a Poulan 295. I needed to replace the chain. It is a 20" chain. There is bar oil in the resevoir. The chain will not stay on the bar (it seems loose even when fully tightened). I replaced...


If you replaced the bar AND the chain, you'll need to make sure the chain is the correct chain for the particular bar you've used. If you're only replacing the chain, you need to make sure the chain has the same # of drive links as your old chain (maybe one or two more, if you've had some removed because of chain stretch).

On that particular model, for a 20" chain, you could have a 78 OR 80 drive link chain (drive links being the part of the chain that rides in the groove of the bar). The correct drive link count is determined by the bar you've installed and should have been made clear by whoever you purchased the bar from. Some brands use an 80 drive link chain, but MOST use the 78 drive link chain.

If the bar you purchased uses the 78 drive link chain, but you have an 80 drive link chain, then no matter how far out you adjust the bar, you may not get the chain tight enough. PartsBuggy shows a listing of which bars use the 78 drive link chains here.

Aug 29, 2011 | Poulan Pro Chain Saw 46cc 20"

2 Answers

Bought a 03honda cbr 600rr, front sproket had been changed out and rear tire moved back. chain is loose 2"+ in slack but i can not move tire back any further in swing arms. can I move rear tire up and...


hi, prob good idea with this will be to slacken off the wheel push the wheel forward and fit a chain the correct length for the set up you have, count the links in the chain you have on the bike and get one 2 links shorter, mark a link on the chain with paint or sim turn the wheel and count the link plates, ie 1 plate is 2 links, so start on the 1 next to the marked 1 turning the wheel counting the plates 2 4 6 8 10 etc and end on the marked 1 this will give you the number of links already on the bike

Jan 15, 2011 | 2003 Honda CBR 600 RR

1 Answer

Need to know how to tighten the chain, keeps falling off


I am not familiar with the Kett Car but I'll assume you've tried to see if there was an adjustment of some sort and you couldn't find one....So have you tried removing a link of the chain to shorten the chain? Chains can be shortened by taking one link out. Just realize that if you remove a link the chain may then be too short. So I'm not sure how much slack you actually have?
But to remove a link:
1) Find the master link where there will be little clip on the outside of one side of the chain and remove that clip and save it. It should slide off with a little pressure.
2) The Master link with the clip removed (mentioned above) can be taken out and the chain will no longer be in a loop. Save the master link because you'll need to put it back together after.
3) To remove a link, using a file or a grinder...grind off the last link on eather side of the chain. Use your Master link to see how far or how many links you'll need to remove. Remember, the master link will have to go back in to make the chain a loop again so you want to remove the link in the right place and not remove any more links than you need to.
4) Once you find where you want to remove the link, If you can visualize the letter "H" as a chain link, where the cross bar is there will be a silver piece on each side of the outside of the chain. This is what you want to grind off just on one side of the chain.
5) You'll see how the chaing is put together and using a punch, you can tap out the center cross piece. What you should be left with is (if I could put these sideways it would be easier to show) an 8 on one end of the chain and an 8 on the other side.
6) The master link will go back into the ends of these and rejoin the chain. Master links and chainds can be bought at most hardware stores so if you cut off too much you can replace the chain or master link.
7) If you do need to get a new chain, take the old one with you so you can get the right size.

Sep 26, 2010 | Kettler Classic Flyer By Kettcar Pedal...

2 Answers

I do not know how to get the chain off of my bike does anyone know how to take it apart.


Bike chains have one link that you can take apart. Look at all of the links and you will find one that looks different. you can use a straight screwdriver to push the removable keeper off the link and it will come apart so you can remove the chain.

For more info:
http://www.bicyclinglife.com/HowTo/ChangeAChain.htm

Jul 03, 2010 | Cycling

2 Answers

Chain came off r70 riding mower how do i put it back on


ok there is three sprockets one on the transmission a guide in the middle and onle on your back axle. take a wrench and loosen up the middle sprocket. slide it all the way back untill the chain is snug or tight. tighten up your bolt and it should notice it drives faster and thats how you keep it from falling off. hope it works for you

May 15, 2010 | Garden

2 Answers

Chain length


For a honda 1999-2000 CBR600

you will need a 108 chain link. This is the standard link considering your front teeth has 15 and rear has 45.

If you're not sure of the chain length, buy the 120 link 530 Heavy Duty chain. THe longer the better, you can always cut the chain (using a chain cutter and repair kit) if its excessive.



I recommend you buy the gold chain-type.

Mar 16, 2009 | 2005 Honda CBR 600 RR

2 Answers

I have a pacific usa mountain bike and the chain broke an i bought a chain and I cant figer out how to put it back together


well usually all chains have a link that comes off. if you get that to come apart, then you put the chain on the teeth were the teeth come through between the links. then you link back together the two chain links. it might be a little hard though

Mar 08, 2009 | Mountain Bicycle Chain Press Fit 42 In ...

2 Answers

My firelight is corruptable


yess u can :

Try first : SRART - RUN - CMD - THEN WRITE CHKDSK E:
ENTER and wait..Try if it will open if not just email me and i will take care off it ar_pllana@hotmail.com

Nov 06, 2007 | SmartDisk FireLite 40 GB Hard Drive

Not finding what you are looking for?
1992 Yamaha FZR 600 Logo

Related Topics:

18 people viewed this question

Ask a Question

Usually answered in minutes!

Top Yamaha Experts

dhnguyen

Level 2 Expert

281 Answers

Steve Sweetleaf
Steve Sweetleaf

Level 3 Expert

1144 Answers

Tony

Level 3 Expert

2600 Answers

Are you a Yamaha Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...