Question about 1987 Honda XR 250 R

1 Answer

Cant fit my monoshock back in after ive put in the airfilter casing honda xr 200 1987

Posted by on

  • Anonymous Mar 30, 2014

    i cannot assemble the switch back

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 29 Answers

Sounds like you got the air filter casing backwards

Posted on Jan 30, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2008 honda shadow 750 keeps dying out


either a fuel blockage or blocked idle valve in carborator.
also possible air filter is blocked, ensure airfilter is clear and if
recently replaced ensure it is in the right way round
known case of airfilter being put in back to front and when it rained
the filter got completely blocked.

for quick check of air filter, remove it and try to start engine.
but do not drive without filter in as dirt can kill your engine for good.

I hope this was useful.

Sep 01, 2012 | 2008 Honda VT 750 Shadow

1 Answer

I have a 1990 Honda XR 250 and when i kick it over the kick start ether jams and will not move but if i rock the bike back and foward in gear it will free but still no compresion. I havnt tried to crash...


You need to drain your oil, then remove the right side-case. When the side case is removed you will notice the kick-starter return spring will have a little tab that bends toward the center cases. that tab needs to be inserted into its proper place.>>( its apperantly has slipped out of place.) This is pretty common so don't be to alarmed over it. You will notice it right away once the case is off. If your not sure how the tab fits in place--try looking at a parts fish or go to the dealer and have the parts guy pull it up on the computer screen. I do not recommend bump starting it while that spring is no secured in its proper place.

Sep 05, 2011 | 1999 Honda XR 250 R

1 Answer

I put new rings in my 86 xr 200 after setting the timing correctly with the 0 mark on the cam and the t mark on the flywheel the bike starts first kick but wont idle and pops and wont rev cleanly or very...


clean the carb there are some tiny holes in the xr carb that can corrode closed if if the bike sits for a time
fit a new plug
check the valve clearances
put the ignition plate back were it started

May 08, 2011 | Honda XR 200 Motorcycles

1 Answer

Hi, Ive just done a complete rebuild on my crf250 (06) put a new crank, con rod the works, when i put the cases back together the oil pump wont turn, its not that I'm over tighting the bolts or got the...


do you have a clymer manual-it contains detailed rebuild--you know bottom work is really touchy and if things arent done just rite--issues! even pros develop problems

Jan 01, 2011 | 2005 Honda CRF 250 X

1 Answer

1983 Honda XR 350 - Reattaching the exhaust pipe w/ flanges.


I cant quite figure out which spacers you are refering to. The only thing I can think to suggest is the exhaust schematic on bikebandit.com. If I knew for sure I could try to look at my bike but there's no telling what previous owners could have done. Sorry. I'd really like to help.

Sep 08, 2009 | 1985 Honda XR 250 R

1 Answer

Hello there: I wonder if I can replace the rear shock of my XR 600R 1992 with a XR 650R 2002 rear shock. Cant find any information about the full lenght of either? Thanks in advance guys. Cheers.


Hi Manolo,

with regard to your question, YES, you may use an OEM rear shock from an 02 XR 650f to your 1992 XR600. Both models have the same link type ro it should fit perfectly.note the placing though, you may need larger bushing to fit the shocks.

hope this helps. if you have other questions, please let me know.

regards,

voodoo

May 18, 2009 | 1992 Honda XR 600 R

1 Answer

Electric start dont work


You probably have a bad switch

First look to se if there are any fuses
also see if horn works

FIX for determining if starter works


to find out take jumper cables and put the red cable on the plus side of the battery and the black on the minus side of battery(ground)

Put the black lead(ground ) on the frame of the bike near starter and touch the red to the starter lead( you may have to peel back rubber boot over starter nut

when you touch the starter nut it will spark and should spin over

if it does then you need to remove the screw assembly that holds the starter button and remove and clean it out with electronic cleaner (you may have to replace it if so go to honda shop and order new one


Good luck

Jan 07, 2009 | 2008 Honda XR 125 L

Not finding what you are looking for?
1987 Honda XR 250 R Logo

Related Topics:

170 people viewed this question

Ask a Question

Usually answered in minutes!

Top Honda Experts

Arnie Burke
Arnie Burke

Level 3 Expert

4481 Answers

yadayada
yadayada

Level 3 Expert

61168 Answers

Gino Cussen
Gino Cussen

Level 2 Expert

216 Answers

Are you a Honda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...