Question about Suzuki Motorcycles
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
One the left-hand side of the bike (facing forward), there is cover plate just ahead of the drive shaft. Remove that cover (mine has 8mm bolts). The bleeder valve is under this cover. Go to an auto parts store and get a "one man bleeder kit" or if you have some plastic tubing that will fit over the valve, you can use that and a clean jar. Follow the instructions on the bleeder kit, or if you're using the jar and tubing, fill the jar about a quarter of the way with break fluid (use DOT4, but never DOT5!). Take the cover off the master cylinder up at the handlebars, place the tube over the end of the bleed valve (after loosening it a turn or two. Place the other end of the tube down in the break fluid in the jar. Work the clutch lever until you stop getting bubbles in the jar. Be sure to keep the fluid level up in the reservoir. Tighten the bleeder valve, remove the tubing, top off the fluid and replace the covers.
Be careful not to get brake fluid on anything. It will eat paint and mess up other things.
Posted on Feb 13, 2009
Could be a bad starter push button,poor connection in wiring, bad safety switch.Need to track down with voltmeter if you can.
A good dealer may offer some help if you buy the parts needed from them.
Posted on Oct 24, 2009
You need to buy a volt meter and set it on 10, or 20 v-. Start the bike and see what it says. A good charging system will show 13-14+ volts. If the meter says 11-12 volts or does not change, you have a bad stator, or rect/reg. Take to a shop to have it further tested. Chaz Moto DC
Posted on Jan 22, 2010
Tips for a great answer:
Aug 12, 2017 | 2000 Suzuki VL 1500 Intruder LC
Jul 05, 2016 | 2004 Suzuki Intruder LC 1500
Jul 03, 2016 | Motorcycles
Mar 29, 2015 | 2000 Suzuki VL 1500 Intruder LC
Aug 20, 2011 | 2000 Suzuki VL 1500 Intruder LC
Jun 04, 2011 | 2000 Suzuki VL 1500 Intruder LC
Aug 06, 2010 | 2000 Suzuki VL 1500 Intruder LC
Apr 22, 2010 | 2001 Suzuki VL 1500 Intruder LC
Mar 24, 2010 | 2000 Suzuki VL 1500 Intruder LC
Jan 23, 2010 | 2000 Suzuki VL 1500 Intruder LC
Jun 07, 2015 | Suzuki VL 125 Intruder LC Motorcycles
20 people viewed this question
Usually answered in minutes!