Question about 1991 kawasaki KR-1S

1 Answer

Restricting power can anyone tell me what restricting the power output of my 1991 KR1s involves?

Posted by on

  • 1 more comment 
  • realnovice Jan 29, 2009

    what do you call a governor because that is the idea i'm looking at but it has to pass an engineers inspection to enable my daughter to ride it on her provisional licence. I was thinking it would entail re-jetting the carbs but i required jet sizes to limit to 25kW and then how to calculate the power output.

    cheers



    trn.

  • realnovice Jan 29, 2009

    clarification for DCF. as I said I need to resrict the power output at the back wheel in an appropriate manner which would satisfy the necessary legislation and get us a certificate of proof by a registered Motor Vehicle Engineer. I have a feeling that theres a lot more to it than just limiting the throttle movement but am not sure hence the call for help.



    thanks



    TRN

  • Dick
    Dick May 11, 2010

    Restricting it in what way? Adjustment so the throttle does not open all the way is probably the easiest.

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Genius:

    An expert who has answered 1,000 questions.

  • Contributor
  • 1,199 Answers

I would just adjust the throttle or you can add a govener

Posted on Jan 24, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Can anyone tell me where the tdm is in my 1991 firebird


Are you talking about the theft deterrent module ?
Its behind the instrument panel.

Aug 17, 2012 | 1991 Pontiac Firebird

1 Answer

I have a Pioneer VSX-305 receiver. I blew channel A speaker outputs by allowing speaker wires to touch while the output was on. Everything else works, including the B speaker outputs. There are only three...


There are independent relays for the speaker A and B switching.Best place to start would be from the relay. When you select A do you hear a click, if not relay is not switching. The circuit involved is a small transistor , a low value resistor ( could be the culprit ) and a shunt diode.

Aug 16, 2011 | Pioneer VSX-305 Receiver

1 Answer

I have just buy a old shewood rv6030r but i want to know its power .May someone can tell me about it Thank you first


Search engines find these answers immediately without involving 'experts'.

According to this:

http://www.echipamenteaudio.com/tag/rv-6030r

Power Output Continuous RMS at 8 ohms 100W + 100W
Rear Channel power output at 8 ohm, 20W + 20W
Central Channel at 8 ohms, 65W

Jun 29, 2011 | Sherwood RVD-7090R

1 Answer

I have a Toyota Corolla/91 1.6 L 4 cyl. DX When I start the car run but does not has power. I changed or replaced the fuel filter, air filter, sparks plug, check up the battery, alternator, fuel...


Check that the ignition timing is set correctly. Use a timing light and set the timing to 10 deg Before Top Dead Center (BTDC). Check the fuel pump pressure output. If you still lack power, it could be that the exhaust system is restricted.

One test you can do is to remove the oxygen sensor. With the sensor removed, start and run the car. The exhaust will be loud with the sensor removed, but see if the engine's power is improved. If it has greatly improved power, the exhaust pipe has a restriction. A very common restriction is that the catalytic converter is internally damaged. Changing the catalytic converter will be necessary if this is the problem. The internal honeycomb of the converter can melt down and turn to **** or it can break down into a coarse sandy substance that can clog the converter exit.

Apr 01, 2011 | 1991 Toyota Corolla

1 Answer

My cannon printer will not turn on at all I checked the plugs but nothing


Generic comments:

You do have power in the wall, right? does this printer run on 110 or is there a transformer involved. If a transformer is involved, have you checked its output with a volt meter?

Check these things and tell me more about your trouble. I want to help you

a

Sep 23, 2009 | Canon Office Equipment & Supplies

1 Answer

Nokia 2630 codes


have a Nokia 2630 from Australis CODE:0556372 IMF:357691 but its asking me to input a restriction code when i switch it on. Can anyone please give me a restriction code or tell me how to go about this. Thankyouit on.

Apr 14, 2009 | Motorola Mobility Boost i415 Cellular...

1 Answer

Kr1s stuck in gear


kr1s gear box is a quick change cassette with three seletor forks. stuck in gear could be a bent fork or a snaped selector spring, remove 3 bolts on front sprocket cover , then remove 4 bolts to change cover, check for damage to levers and that both springs are connected, if no damage ,undo and reome bolts hold gearbox cassette and withdraw the complete unit check forks, fork rollers and the drum for cracks or missing guides.manual can be found at
KR-1S.co.uk

Mar 08, 2009 | 1988 kawasaki KR-1

1 Answer

More confident


but not for much longer. Can anyone tell me what's involved in a license in GA? Also can anyone tell me about painting a bike? It's probably the same as my situation in Pennsylvania--with a learner's permist one cannot ride after sundown or carry passengers. There are no other restrictions.,,,

Nov 10, 2008 | 2007 Highland Highland Allroad

1 Answer

1991 911 C2 porche


It may be just a hose. You can get that fixed at a shop for cheap and then you can put more power fluid in. In should work then.

Nov 03, 2008 | 1991 Porsche 911

Not finding what you are looking for?
1991 kawasaki KR-1S Logo

Related Topics:

68 people viewed this question

Ask a Question

Usually answered in minutes!

Top kawasaki Experts

Arnie Burke
Arnie Burke

Level 3 Expert

4514 Answers

yadayada
yadayada

Level 3 Expert

71338 Answers

chris

Level 2 Expert

232 Answers

Are you a kawasaki Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...