Question about 2000 Harley Davidson FXDWG Dyna Wide Glide

1 Answer

Need torqe spec for front wheel axle

1998 fxdwg dyna wide gliude

Posted by on

  • Anonymous Mar 23, 2014

    front wheel axle specs

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 216 Answers

Tighten the axle nut to 50-55 lbs. The slider cap nuts 5-11lbs

Posted on Jan 24, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Harley torque specs


I'm thinkin" 40 to 45 foot pounds

Apr 28, 2014 | 2000 Harley Davidson FXDWG Dyna Wide Glide

1 Answer

Harley torque specs


Hi Anonymous, front brake rotor 16 to 24 ft lbs. front axel 50 to 55 ft lbs.Good Luck

Apr 07, 2014 | 2007 Harley Davidson FXDWG Dyna Wide Glide

1 Answer

What is wheel bearing torque on 01 dyna wide gluide


Hi Anonymous,
1. Front axle nut 50-55 ft lbs.
2. Front fork cap nuts 11-15 ft lbs.
3. Rear axle nut 60-65 ft lbs.
Good luck and have nice day.

Dec 28, 2012 | 2004 Harley Davidson FXDWG - FXDWGI Dyna...

1 Answer

How do you install a rear axle on a 2005 dyna fxdwg


Hi Anonymous, for more information about your question please visit the website below. Good luck and have nice day.
How to remove install rear wheel tire of Harley Davidson Motorcycle Law...

Aug 06, 2012 | 2002 Harley Davidson FXDWG Dyna Wide Glide

1 Answer

2011 dyna wide glide front axle won't come off


Hi Anonymous, try using a hammer and drift. Good luck and have nice day.

Jul 14, 2012 | 2000 Harley Davidson FXDWG Dyna Wide Glide

1 Answer

I want to see the rear wheel assembly on2004 dyna wide glide. axle,washers,and spacers.


Go to this site http://www.bikebandit.com Click OEM parts. Choose H-D and your year and model of your bike. Click on rear wheel. It may not show the the '04 FXDWG but you can try looking a year earlier or later to find what you need.

Good Luck
Steve

Apr 24, 2011 | 2000 Harley Davidson FXDWG Dyna Wide Glide

1 Answer

I need to know how to change my front tier on my 2001 wide gliude


You must have a way to get the motorcycle off the ground. Prefferably a way to raise the bike once you get everything loose but at least something to raise it high enough to get the front wheel out from under the fender.

Now, loosen and remove the axle nut. Then loosen the two nuts of the clamp on the bottom of the right fork slider. Tap the axle out from the nut end. If it's tight, screw the nut back on just far enough to protect the threads before hitting the axle too hard. As the axle comes out, mark any spacers that come out as to where they go and in what direction they are installed. Once the axle it completely out, lower the wheel straight down until the rotor comes out of the caliper. Also, if your bike is equipped with a front wheel speedometer drive unit, carefully remove the unit from the wheel and let it hang from the cable.

If you mount your own tire, make sure you mount it so that the "direction of rotation" is correct and that the bead is properly seated. Inflate the tire to it's recommended pressure.

To remount the wheel on the bike. Take something and spread the brake pads and start the rotor up betweent he pads. Insert the speedo drive unit back into the wheel with the drive tab of the unit properly aligned in the slot of the wheel. Lubricate the axle with a light coat of some sort of waterproof grease. Lift the wheel into position and start reinserting the axle from the proper side. Make sure you get all spacers installed in the position and direction that they came out of. With the axle fully inserted, put the nuts on the clamp on the lower fork slider and gently snug them. Then put the axle nut on and torque the nut to 50 foot pounds. Then tighten the clamp nuts to 18-20 foot pounds.

Spin the wheel and make sure it rotates freely and check the front brake for proper operation before riding the bike. Make sure everything is properly assembled and tightened before riding the bike. If this job is done incorrectly, serious injury or death could result.

Good Luck
Steve

Jul 16, 2010 | 2001 Harley Davidson FXDWG Dyna Wide Glide

1 Answer

How do i remove the rear wheel on a 2005 harley davidson dyna wide glide? the exhaust won't come off and is n the way. not sure how hard the springs r 2 remove and put back on. The bike is on an air lift.


you should not have to remove shocks dont do that to remove wheel loosen the back section of your exhaust the nut that holds it is the only one you need to take off the back section of your exhaust now loosen the tension screws in front of the axle nut on both sides this creates slack on your belt or chain drive take off big nut on axle use tools on both sides at same time to keep axle from spinning take weight off of wheel just enough to allow wheel to be wiggled and slide the axle out you can tapp on axle just not on threads if you have to beat on it place nut on axle loosly and hit only to free it up it should slide out after a few taps the brakes are on a spacer style format on axle rememmeber with spacer goes on which side they are different in size to accomadate wheel spacing to brakes and belt alignment when wheel drops remove drive type belt or chain wheel should roll out of place you may need to lift bike higher with lift or jack to clear fender on roll out ta dah you have your wheel off to put back on reverse this order i change all my own tires have done all types for friends i hope this helped you

Jun 10, 2009 | 2005 Harley Davidson FXDWG - FXDWGI Dyna...

2 Answers

Front axel torq specs. valcan classic 800


I have a 1500 vulcan, on my bike its 60 lbs.

Apr 18, 2009 | 1998 kawasaki VN 800 Vulcan Classic

Not finding what you are looking for?
2000 Harley Davidson FXDWG Dyna Wide Glide Logo

229 people viewed this question

Ask a Question

Usually answered in minutes!

Top Harley Davidson Experts

Arnie Burke
Arnie Burke

Level 3 Expert

4514 Answers

Gills Lango

Level 2 Expert

195 Answers

Mike

Level 3 Expert

4334 Answers

Are you a Harley Davidson Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...