Question about Yamaha Motorcycles

1 Answer

Yamaha fazer fzs 03, keeps cutting out when i turn lights on or press brakes

Battery is fine and the bike idles fine but lights and pressing the brakes keeps cutting the engine out

Posted by on

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Expert
  • 314 Answers

Yamaha Fazer Brakes, Weight and Fuel Capacity

  • The 1998 Fazer has dual-disc front brakes and single-disc rear brakes. It has a seat height of 31.1 inches at its lowest setting and a dry weight totaling 416.7 lbs. The Fazer has and electric starter and a fuel capacity of 4.75 gallons.

Posted on Jan 14, 2013

3 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Suzman
  • 642 Answers

SOURCE: Break light and number plate light stuck on!

There are 2 switches that activate the brake light. One in the RH handlebar and the other on the rear brake pedal. The rear is activated by a spring connected to the brake pedal. Unhook the spring and see if the light goes out. If it does the unit can be adjusted by screwing the switch further toward the brake pedal (Turning clockwise)but you will have to undo the lock nut first. What usually happens is that the rear brake pedal return spring gets worn out and the pedal starts to droop slightly thereby activating the brake light switch.
To check the front switch. Disconnect th RH handlebar wire harness behind the headlight.(just follow the wires from the handle to their connector. Repair of the switch is rarely succesfull, replacement being your best bet.

Posted on Aug 02, 2010

  • 8909 Answers

SOURCE: Click, click, click, click, click etc, etc !!!!!!

Could be a faulty starter motor. I would check the power to the motor when you try to start it.
Hope that helps.

Posted on Mar 01, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Hi guys, my bike keeps cutting out if i put lights on or press the brakes front or rear. bike starts and idles fine. totally stumped and any help would be great


  1. Yamaha Fazer Engine and Transmission
    • The 1998 Fazer is powered by a four-stroke, 16-valve, in-line, four-cylinder engine with displacement measuring 36.55-cubic inches. This motor generates 95 horsepower at 11,500 rpm and 45.0 foot-pounds of torque at 9,500 rpm. It has a six-speed transmission and a liquid cooling system. The 1998 Fazer has a top speed of 139.8 mph.
    Yamaha Fazer Brakes, Weight and Fuel Capacity
    • The 1998 Fazer has dual-disc front brakes and single-disc rear brakes. It has a seat height of 31.1 inches at its lowest setting and a dry weight totaling 416.7 lbs. The Fazer has and electric starter and a fuel capacity of 4.75 gallons.
    Yamaha Thundercat Engine and Transmission
    • The 1998 Thundercat is powered by a four-stroke, 16-valve, in-line, four-cylinder engine with a displacement of 36.55-cubic inches. It generates 100.00 horsepower at 11,500 rpm and 48.7 foot-pounds of torque at 9,500 rpm. The Thundercat has a six-speed transmission and a liquid cooling system.
    Yamaha Thundercat Brakes, Weight and Capacity
    • The Thundercat has dual-disc front brakes and single-disc rear brakes. It has a dry weight of 412.3 lbs. and a seat height of 31.3 inches at its lowest setting. The 1998 Thundercat has an electric starter, a 5.0-gallon fuel capacity and a top speed of 158.4 mph.

Jan 14, 2013 | 2003 Yamaha FZS 600 Fazer

1 Answer

Yamaha fazer 1000 neutral light


Hi, Anonymous and the usual suspects are:
1. Faulty neutral switch.
2. Grounded neutral light circuit.
For more information about your issue and valuable "FREE" downloads that you will need please click on the blue links below. Good luck and have a wonderful day.
Yamaha Fzs 1000 Fazer Neutral switch How to replace and remove
How to replace the Neutral switch on Yamaha Fazer Fzs 1000 part number 3GB...
Yamaha FZS1000 2001 Service Manual
OEM parts for Yamaha
YAMAHA FZS1000 Owner Manual

Jul 08, 2012 | 2002 Yamaha FZS 1000 Fazer

1 Answer

2003 Yamaha FZS 1000 Fazer will not start


Hi, Sctulin and the usual suspects are:
1. Ignition Switch not in the "ON" position.
2. Engine Run Switch in the "OFF" position.
3. Discharged battery, needs to be 12.5 volts or better and be able to pass a load test if necessary.
4. Check the battery terminals for damage or corrosion check the battery cables at "BOTH" ends for loose, corroded, or broken connectors, "INSIDE" and outside the cable harness, perform connector wiggle test and check cables with an ohmmeter if necessary.
5. Tip over sensor needs a reset.
6. Faulty ignition switch.
7. Faulty starter button.
8. Faulty kickstand or clutch pull in switch/sensor.
9. Starter control circuit, relay, or solenoid faulty.
10. Main fuse or circuit breaker may be blown or faulty.
11. Check for engine trouble codes.
For more information about your issue and valuable "FREE" downloads that you will need please click on the blue links below. Good luck and have a wonderful day.
yamaha fzs fazer strating problems
What to do When Your Motorcycle Won Start
Yamaha FZS1000 2001 Service Manual
OEM parts for Yamaha
YAMAHA FZS1000 Owner Manual

Aug 23, 2011 | 2003 Yamaha FZS 1000 Fazer

1 Answer

YAMAHA 03 FZS 1000 FAZER, FIRST COLD START PROBLEM, BIKE WILL START BUT WILL NOT STAY RUNNING, OPEN THE TROTLE EVEN SLIGHTLY IT STOPS.


Hi, Ian_julia_wa and the usual suspects are:
1. Fuel cap or fuel tank is not venting properly.
2. Fuel filter clogged.
3. Fuel line pinched or kinked.
4. Float needle and seat sticking.
5. Float level too low.
6. Carburetor bowl vent line clogged/blocked/pinched.
7. Idle adjusting screw set too low.
8. Air/fuel mixture screw set too lean.
9. Idle port, transfer ports, slow air jet clogged.
10. Slow fuel jet clogged.
11. Faulty fuel pump.
For more information about your issue and valuable "Free" downloads that you will need please Click on blue links below. Good luck and have a wonderful day.
Motorcycle Message Board Motorcycle USA
http://www.xbhp.com/talkies/help-me/5370-yamaha-fz-16-fz-s-1552-print.html
Yamaha FZS1000 2001 Service Manual
OEM parts for Yamaha
YAMAHA FZS1000 Owner Manual

Oct 26, 2010 | 2003 Yamaha FZS 1000 Fazer

1 Answer

Break light and number plate light stuck on! My bike is a fzs 600 fazer on an '03 plate and yesterday I noticed that the brake light and numberplate light wont turn off when the ignition is on. All the...


There are 2 switches that activate the brake light. One in the RH handlebar and the other on the rear brake pedal. The rear is activated by a spring connected to the brake pedal. Unhook the spring and see if the light goes out. If it does the unit can be adjusted by screwing the switch further toward the brake pedal (Turning clockwise)but you will have to undo the lock nut first. What usually happens is that the rear brake pedal return spring gets worn out and the pedal starts to droop slightly thereby activating the brake light switch.
To check the front switch. Disconnect th RH handlebar wire harness behind the headlight.(just follow the wires from the handle to their connector. Repair of the switch is rarely succesfull, replacement being your best bet.

Aug 02, 2010 | 2002 Yamaha FZS 600 Fazer

2 Answers

I have a '99 FZS Fazer 600, and it won't start. I've been having problems with the battery running down when riding with lights on, and I sometimes have to push start the bike. Now though, the bike cut out...


i had same problem turned out to be electrical issue check all your wiring connections under the seat and under your fuel tank and if there all fine try checking that your fuel pump motor is running mine wasnt because of damp on my wiring connectors. when you turn on the ignition the bike should click a few times and your fuel pump should come on look under your tank looks like this with 2 tubes running from your fuel tank http://cgi.ebay.co.uk/yamaha-fzs-600-fazer-00-fuel-pump_W0QQitemZ250559832283QQcmdZViewItem?rvr_id=&rvr_id=&cguid=6d2769071260a0e2048322d3fffcee00
this needs to be running or you will be riding the bike on gravity fed fuel and as soon as you open the bike up you will not get enough to the engine and will cut out hope this helps

Oct 04, 2009 | 1999 Yamaha FZS 600 Fazer

1 Answer

Bike does not start


Hi, I would start by checking to be sure the battery has a good enough charge, if not then locate the starter relay and try jumping the two terminals on it and seeing if the bike will start that way if so then you will need to replace the starter relay. good luck

Mar 08, 2009 | 2003 Yamaha FZS 600 Fazer

Not finding what you are looking for?
Motorcycles Logo

Related Topics:

243 people viewed this question

Ask a Question

Usually answered in minutes!

Top Yamaha Experts

dhnguyen

Level 2 Expert

281 Answers

Steve Sweetleaf
Steve Sweetleaf

Level 3 Expert

1144 Answers

Tony

Level 3 Expert

2600 Answers

Are you a Yamaha Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...