Question about Motorcycles
Waveruuner won't turn over
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get 2 Free calls (no credit card required) and instant help on almost anything you can think of (from cars to computers, appliances, handyman, and even pets).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Charge battery to full, start in neutral, still clicks? Bad ground, or bad connection. Jump starter solenoid with screwdriver,etc. if motor turns over the relay is bad. Chaz Moto DC
Posted on Jan 22, 2010
SOURCE: My yamaha raptor has power,
Check the compression, pull the spark plugs one at a time if more then one. If you don't have a compression gauge, you can put your figure over the spark plug hole, be mindful that before it blows it's going to **** so make sure that you don't hurt yourself leave a little gap so your figure doesn't suction down to tight. If your getting compression it should **** and blow pretty hard. If it seems to have good pressure and suction. You might need to check your timing, also make sure that you can feel air moving out the exhaust, might not be able to with the pipes on it but if it won't start and your getting everything else it needs to run gas,spark, etc. It has to almost be timing or compression.
Posted on May 15, 2011
Take a look at the starter solenoid. There are two larger wires, on the back. One from the battery positive, (main hot wire), the other goes to the starter motor (If you jump these terminals the starter will spin but will not engage the flywheel). Look at the wires and nuts on the solenoid, especially the starter motor side make sure they are clean and tight, have not gotten hot and started rusting. Also check the voltage on the solenoid wire, (smallest) wire from the start button. In some cases there is a voltage loss on this wire. Next time it will not engage the starter right away, make a jump from the main power battery terminal on the starter to the solenoid wire. If it starts right up every time, you need to add and wire in another relay to carry the voltage to the solenoid from the start button, (a relay to work the solenoid, lol). If that test does not work or help.. Tap on the starter motor with a hammer. if it catches and turns the engine then, the motor brushes are worn and need to be replaced.
Posted on Sep 25, 2011
Sounds like the carbs are gummed up from the old gas sitting in them. Remove the carbs, disassemble, clean with a carb cleaner, and reassemble.
Posted on May 15, 2012
Tips for a great answer:
May 11, 2014 | 2000 Yamaha V Star 1100 Classic
Mar 14, 2013 | Yamaha 12V Air Pump
Mar 02, 2012 | 2007 Yamaha V Star 1100 Classic
Feb 23, 2012 | 1999 Yamaha V Star 1100 Custom
Jan 16, 2012 | Yamaha Boating
Aug 22, 2011 | 2007 Yamaha V Star 1100 Classic
Jul 09, 2011 | 2004 Yamaha V Star Classic
Jun 14, 2011 | Yamaha Boating
Jan 22, 2010 | 2001 Yamaha V Star 1100 Classic
Oct 31, 2017 | Motorcycles
202 people viewed this question
Usually answered in minutes!