Question about 2003 Suzuki GZ 125 Marauder

2 Answers

Tyre Pressure Can you tell me the correct tyre pressure for Suzuki Marauder 125cc

Posted by on

  • martine_mcke Jan 23, 2009

    Thanks very much. Very helpful

×

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 842 Answers

As always, correct pressure depends on the tyre fitted but if it is running with the standard tyres that it had fitted from new then:
Single rider: Front is 1.75 bar (25 PSI) Rear 2.0 (29 PSI)
Fully loaded (Panniers and or pillion passenger) Front 2.0 bar (29 PSI) Rear 2.25 bar (32 PSI)

These settings from the book for a 2006 model, though I imagine that they apply to all with very little if any variation

Posted on Jan 23, 2009

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Mercedes 814 minibus tyre pressure

Posted on Jan 20, 2014

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What is the tyre pressure for sym jet 4 125cc. Please anybody??


If the tyres are Michelin and the correct size, try Front = 32 Psi Rear (single) = 32 Rear (with pillion) = 36

Jan 22, 2017 | Sym Motorcycles

1 Answer

Can I put 2005 model forks from a suzuki marauder 125cc on a 2011 125cc marauder


Maybe- are the diameter of the fork legs the same and are the fork leg measurements the same centre to centre?

Its possible but hard to answer with out the above information.

May 14, 2014 | 2003 Suzuki GZ 125 Marauder

1 Answer

I have a suzuki marauder gz 125cc 99reg. It was driving fine up to a couple of days ago but now it really screeches in first gear and I have to immediately put it into second. Any reason why this woul


The most likely cause is the clutch plates have worn out. You have to consider that these 125s are usually ridden by beginners, this means that they will be revved out in ,at least, the first 3 gears.

Jul 21, 2012 | 2003 Suzuki GZ 125 Marauder

1 Answer

Suzuki marauder 125cc t reg starts and runs fine but soon as select gear engine turns off


Your kickstand may have to be up otherwise the bike will shut off.... saftey switch may be bad if kickstand is up.

May 15, 2011 | 2000 Suzuki GZ 125 Marauder

1 Answer

Whats the correct tyre pressure for my 2001 suzuki burgman an 400 also if by chance i had put 4 bar in the tyre by mistake but only had the scooter on the centre stand have i done any harm


Hi, a 1999-2003 suzuki burgman /an 400 using standard tyre sizes 110/90-13 front is 1'75 bar (25psi)
130/70-13 rear is. 2 bar-(29psi) and 2.8 bar (41psi when carrying a passenger) check the tyre for correct seating on the rim, dont think you have done any harm, the only danger inflating small tyres to a high pressure is you risk blowing it off the rim, as you have now corrected it you should be ok with that, paul

Feb 21, 2011 | 2001 Suzuki AN 400 Burgman

2 Answers

Can you please tell me correct tyre pressure for front and back tyres on VL250?


There should be specs on the side wall of the tire for what weight you are loading the bike. normally 36 to 42 lbs

Dec 13, 2009 | 2001 Suzuki VL 250 Intruder LC

2 Answers

Lost manual what are the tyre pressures for suzuki bandit 650


According to my Haynes manual for 600 and 1200 Bandit fours the correct pressues are 33psi front and 36 psi rear

Sayin that it says the 1200 is 36psi front and rear and everyone kens it's 36 and 42

Apr 13, 2009 | 2005 Suzuki GSF 650 S Bandit

1 Answer

I want to clean the baffles on the exhaust of my 2002 suzuki


hi your exhaust is a sealed item,also your bike is a 4 stroke,why would you need to clean the baffles?only reason these would block up is if you are burning oil,if you are then i would think about a top end overhaul

Mar 25, 2009 | 2002 Suzuki GZ 125 Marauder

1 Answer

Correct tyre pressure


Depending on the type of riding you are doing, you will want to run 28 - 30 in the front and 30 - 32 in the rear. The rear builds more heat and will stabilize at 36 when hot, the front takes longer because of less weight on the tire so it will need to be initially lower but it too will build to 36 hot.

Dec 02, 2008 | 2008 Suzuki GSR 400

Not finding what you are looking for?
2003 Suzuki GZ 125 Marauder Logo

Related Topics:

2,772 people viewed this question

Ask a Question

Usually answered in minutes!

Top Suzuki Experts

yadayada
yadayada

Level 3 Expert

70374 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

4514 Answers

Ed Nelson
Ed Nelson

Level 2 Expert

149 Answers

Are you a Suzuki Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...