2002 Audi allroad Logo
Posted on Jan 13, 2013

Turn signal flasher won't flash right or left

When I turn on my signal for a left or right turn, the light will come on the dash and the outside but will not flash.

1 Answer

Anonymous

Level 1:

An expert who has achieved level 1.

New Friend:

An expert that has 1 follower.

Corporal:

An expert that hasĀ over 10 points.

  • Contributor 3 Answers
  • Posted on Jan 13, 2013
Anonymous
Contributor
Level 1:

An expert who has achieved level 1.

New Friend:

An expert that has 1 follower.

Corporal:

An expert that hasĀ over 10 points.

Joined: Jul 01, 2012
Answers
3
Questions
0
Helped
1592
Points
12

Needs flasher relay which is the 4 way flasher

3 Related Answers

Anonymous

  • 42 Answers
  • Posted on Jul 27, 2008

SOURCE: When Signalling to go right

faulty fuse

Ad

Anonymous

  • 1586 Answers
  • Posted on Jun 01, 2009

SOURCE: 2004 audi A6 flasher lights

You need a new hazard light switch - the relay for the hazards and turn signals is built in. It's $40 or so at a dealership to buy a new one.

Anonymous

  • 318 Answers
  • Posted on Nov 17, 2012

SOURCE: Turn signals won't work...4 way flashers work fine. Is this an item I can replace myself?

usually under dash around steering column and attached to eithr dash or firewall in spring clip to make flasher unit more audible

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

Turn signal light right flash

flasher/blinker is busted. this is located under your dash board. remove steering column cover, turn on LEFT turn signal (yes, the one that is working), then you will hear a clicking sound. locate the relay that causes the sound. there you can see 2 relays (one for LEFT, other one for RIGHT turn),replace busted one.
1helpful
1answer

Cant resolve a blinker issue, Tried the easy stuff.

The signal wire going to the right front has a splice for the dash indicator, a wire branching off from the turn wire and going to the dash. It sounds like that right signal wire is broken or lost a connection before it splices off to the dash, so the problem sounds like it is under the dash, either coming out of the turn signal switch to the flasher or from the flasher to that splice. You may need a multi-meter to check voltages on that wire at various places under the dash. Ascertain which color wire you need to concentrate on. Check for voltage on it with key on and right blinker on-voltmeter will spike to battery voltage, then fall to zero as the flasher breaks voltage continuously, if checked after the flasher. If checked when leaving the turn switch, it should be a continuous signal on that wire. Think you better find a wiring diagram to find the right wire to check. Good luck.
0helpful
1answer

My durango dash lights won't come on and my flashers and turn signals won't blink they just stay on any ideas

for the dash lights i would check the fuse...the turn signals not flashing, u need a flasher, usually by the fuse box,most are silver in color.
1helpful
1answer
0helpful
1answer

Need to replace left turn signal flasher

This is weird! It seems to me that the left turn signal is getting 12v from somewhere at all times.I don't think the flasher is the problem(most GM systems use a single flasher for left and right)You probably have a crossed wire somewhere(or an add on accessory was connected to the left signal wire,allowing 12 volts to bleed through to the circuit)
6helpful
3answers

I have a 1995 chevy cavalier and the turn signals just stay on and don't blink. I have changed the flasher and the multi function switch and still no luck

First, is it doing it on BOTH isdes or just on one side? Example: turn signnals flash OK when turning left, but only come on and stay on when turning right. If it is doing this, then you most likely have either a blown bulb or a bad bulb socket on the side that is not flashing. You need to check both the FRONT and REAR bulbs to make sure they are all functioning properly.
If it is doing it on BOTH sides, then you either have a bad flasher, or at least 2 bulbs burned out (one or more on each side).

Are you sure you replaced the correct flasher? The flasher for the HAZZARD lights is plugged into the convinience center under the left side of the dash. If this is the flasher you replaced, it is the wrong one.
The turn signal flasher is mounted to the driver's knee bolster bar near the steering column. It is held to the bar with a clip. (see diagram)

9_25_2011_3_20_38_pm.gif
0helpful
1answer

Signal and brake light problems; Indicators flash fast on dash but not outside; Emergency flashers flash normally on the dash but still nothing on the outside. Brake lights don't work. This has been an...

Replace the turn signal switch. They can be fixed if your up to it, but you have to disassemble the switch. there are parts that have to go back in the right order. Let me know. The longer you let this go , you will start to lose the headlights. All the outside lights run threw the turn switch.
0helpful
2answers

98 Sebring JXI turn signals work right/left and

Change the flasher which is located up by fuse block under dash
1helpful
2answers

Directional signals screwed up, but my 4 way flashers work.

For this modle and year the turn signal flasher should be mounted in a clip on the right side of the steering column support bracket. The hazard flasher is located under the instrument panel in the module block, on the right side.
Hope this helps,
Regards,
Not finding what you are looking for?

293 views

Ask a Question

Usually answered in minutes!

Top Audi Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you an Audi Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...