Question about 1994 Yamaha TDM 850

1 Answer

No tail lights and front small light in tdm 850 1995

One day my tail lights (no stop light) stops lighting same with the front small light, i check fuses under seat but ok! is there anywhere else fuses and i dont know?? or is this a cable that doesnt feet well and make this problem? pls help i cant drive at night always with brakes!!!

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Expert
  • 101 Answers

Well it could be a couple of things, 1st. It could be a bad ground take ground wire off clean contact were grounded and see if that works. if not then i would try your brake light actuator switch. this is all on a circuit if this is faulty then this could be a problem hope this helps

Posted on Jan 23, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What type of bulb do I need for a Piaggio Zip 50 tail light?


They have seperate stop light bulbs to the tail light which is the uncommon.I think the stop bulbs are 12v 4 watt wedge fit sidelight bulbs,they use them in cars too as sidelight bulbs.the tail light one is a 12v 10 watt bayonet type.

Mar 06, 2015 | 2010 Piaggio Zip 50

Tip

Wiring Diagram Kawasaki GPZ 750


Kawasaki GPZ750 (ZX750) Turbo North American models.<br /><br /><img src="suzman_10.JPG" /><br /><br />1 - Right turn <br />2 - High beam<br />3 - Warning light<br />4 - Headlight fail<br />5 - Neutral<br />6 - Left turn<br />7 - Boost Guage <br />8 - Tach light<br />9 - Tach/volt switch<br />10 + 11 - Speedo lights<br />12 + 13 - Illum. lights<br />14 - Spare connectors<br />15 - LCD + warnig lights<br />15 + 16 - LCD illum<br />17 - RF indicator<br />18 - Horns<br />19 - Headlamp<br />21 - LF indicator<br />22 - Reserve lighting unit<br />23 - Hazard switch<br />24 - Indicator switch<br />25 - Horn switch<br />26 - Dimmer switch<br />27 - Starter lockout switch<br />28 - Neutral switch<br />29 - Side stand switch<br />31 - Oil pressure switch<br />32 - Alternator<br />33 - Regulator<br />34 - Solenoid<br />35 - Starter<br />36 - Battery<br />37 - Junction box<br />38 - LR Indicator<br />39 - Stop/tail lamps<br />40 - Stop/tail lamps<br />41 - RR Indicator<br />42 - Injectors<br />43 - Engine temp switch<br />44 - Boost sensor<br />45 - Fuel pump<br />46 - Air temp sensor<br />47 - Throttle sensor<br />48 - Main pump relay<br />49 - Fuel injection control unit<br />50 - Rear brake switch<br />51 - Pick-up coils<br />52 - Ignition control unit<br />53 - Coils<br />54 - Spark plugs<br />55 - Fuel level sensor<br />56 - Front brake switch<br />57 - Starter/engine stop<br />58 - Ignition<br />

on Nov 22, 2010 | Motorcycles

1 Answer

Tail light not working brake works


Is the tail lite OEM or was it installed after production?? DID it work and then stop or did it maybe never work???

Apr 17, 2014 | 2006 Harley Davidson FXDWGI Dyna Wide...

1 Answer

I have power in and out of rear stop light switch. No pwer in either wire going to the front stop light switch. any suggestions???


Hi Anonymous, check the tail light bulb they are famous for failing. Replace it with a high quality heavy duty automotive bulb. Please visit the website below for a free wiring diagram:
Harley Davidson Wiring Diagrams and Schematics
Good luck

Mar 24, 2014 | 2001 Harley Davidson FXDWG Dyna Wide Glide

1 Answer

Eletrical faults


Hi, Sarahjane tail light issues are relatively easy to diagnose and repair always check the tail light fuse first and make sure you have power on both sides of the fuse holder and the usual suspects are:
1. Tail light bulb element is broken.
2. Tail light bulb soldered contacts are extremely worn down.
3. Tail light bulb socket corroded.
4. Tail light bulb socket has no power and or ground.
5. Tail light wiring harness damaged from the rear tire.
6. Tail light rear fender wiring harness connector faulty due to corroded, broken, or loose pins/sockets.
For more information about your issue and valuable "FREE" downloads that you need please click on the links below. Good luck and have a nice day.
Yamaha XV 535 DX Virago Service Manual
OEM parts for Yamaha
http://www.starmotorcycles.com/assets/service/manuals/2000/LIT-11626-13-16_110.pdf
Yamaha XV 535 Virago Low Bars 88
http://viragohelp.com/short-takes-misc-subjectsfixes-virago-tips

Aug 13, 2012 | 1993 Yamaha XV 535 Virago DX

2 Answers

Tail lights working but no brake light


Check your switches. One could have come out of adjustment. There is a switch on the back brake and one on the front hand brake.

Jun 07, 2012 | Yamaha Motorcycles

1 Answer

1993 UK spec XV535. Tail light and front running/parking light stopped working after sitting in garage for awhile. Rode it about 5 miles and it sat for another 2 months. Went to work on it and tail...


I would start simply.Check or replace all your bulbs first.Then take apart your bulb sockets front and back and spray with electrical contact cleaner and a little lubricant.Make sure all the sockets have free travel and are not corroded at the grounding points on the frame.Some lights ground through the frame mounting and some have a separate ground wire.It sounds like you may just have a bad connection. Most brake lights wont work with key off as there is no power to the circuit.Also clean your brake light switches in the handlebar and down on the frame for the back brake.

Aug 17, 2011 | Yamaha XV 535 Virago DX Motorcycles

1 Answer

Tail light doesn't light but tail light warning light on dash does and brake light works.


Try checking to see if the tail light bulb and brake light bulb are one and the same; this usually means that the bulb has two filaments; one for the tail lights and a second filament (brighter) for the stop/brake light.

If one filament has burned out, change the bulb.

I hope this helps.

Have a great day !!!

Apr 09, 2011 | Honda VF 1100 Sabre Motorcycles

1 Answer

Hi, I have just replaced the tail light globe on my KTM LC4 640, all of the other lights are working, including the tail light but the brake light is not. I have had a good look at the wiering but can...


Hi,
check if the stop light switch is working on the front brake lever /rear break pedal.It could have failed and not sending the command to the stop light to go on

Nov 25, 2010 | 2005 KTM 640 LC4 SM

Not finding what you are looking for?
1994 Yamaha TDM 850 Logo

198 people viewed this question

Ask a Question

Usually answered in minutes!

Top Yamaha Experts

mikeuk

Level 2 Expert

61 Answers

Steve Sweetleaf
Steve Sweetleaf

Level 3 Expert

1128 Answers

D. E. Hev

Level 3 Expert

1132 Answers

Are you a Yamaha Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...