Question about Motorcycles

Open Question

Kvf 650 my quad starts for 10 sec then cuts out then switch power switch off then on then starts agen for 10 sec then cuts out need help with my kvf 650 kvf 650 2002

Posted by Anonymous on


2 Suggested Answers

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017

  • 1584 Answers

SOURCE: kawasaki KVF 300 carb setting

If spark plug is wet with petrol then float level is incorrect either by dirt under float needle or set too high.

If you havent altered / removed the carb and it has just happened, somtimes gently tapping the float bowl can dislodge the dirt. Otherwise you will need to remove carby, (I assume it has one) and clean out.

Posted on Dec 20, 2009


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Lose of power during ride on my 2013 kvf 750

clean carb and tank and replace fuel !

Jan 02, 2014 | kawasaki Motorcycles

1 Answer


Oven Control Board

Item #1262801 (OEM Part)

Electronic clock control (T011)

Manufacturer Number WB27K10221

Nov 05, 2012 | GE Wb27k10221 RanClock Timer Oven Control...

1 Answer

Kawasaki kvf 650 won't start unless brake is on

May be a safety feature, check your user manual.

May 30, 2012 | Motorcycles

1 Answer

2000 kawaski kvf 400 quad, brake lite stays all the time will key is on, brake lite switchs for front and rear checked out ok with ohmeter, what may be the problem?

If the switches are operating normally, then you either have the running light wire and the brake light wire switched or you have a short. Two wires have probably rubbed together and are allowing both wires to have power. More likely mud or dirt has gotten into the tail light and the actual light bulb socket contacts are shorting across each other . I would disassemble the tail light and more specifically the tail light bulb socket and look for corrosion, shorting, or a damaged contact plate. Also carefully inspect the wire harness for damage (crushed wires) and proper plug in at connection points.

Mar 11, 2011 | kawasaki ZRX 400 Motorcycles

1 Answer

Wiring diagram for kvf 650

I have several links I will provide the first is a forum. But I personally would purchase a service manual from the dealer. I hope that my advice helped and please do not forget to vote/rate my advice. If there is anything else i can help with please post a reply.

1. 2.

Nov 14, 2010 | 2002 kawasaki KLX 650 R

1 Answer

'08 KVF 750 EFI bogs out above 2000 rpm?

try resetting the belt change switch

Dec 06, 2009 | 2005 kawasaki KLV 1000

1 Answer

How to deactivate check belt light for 2007 kawasaki kvf 360 4X 4 atv

on the KVF on the right side you will see 2 plugs, a grey and a black. conect the grey to black on both turn the key on for 2 minutes . turn the key off and then switch back to there proper position. this should work. The Check belt light comes on when its time for an oil change..

Apr 02, 2009 | Sport & Outdoor - Others

1 Answer

360 kawasaki 4 wheel quad

four w d actuator is faulty replace actuator

Jan 06, 2009 | kawasaki Full Suspension Mountain Bike Men

Not finding what you are looking for?
Motorcycles Logo

Related Topics:

22 people viewed this question

Ask a Question

Usually answered in minutes!

Top Motorcycles Experts

Arnie Burke
Arnie Burke

Level 3 Expert

4536 Answers


Level 3 Expert

77202 Answers


Level 3 Expert

102366 Answers

Are you a Motorcycle Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides