Question about 2002 kawasaki VN 1500 Vulcan Classic

Open Question

Kickstand spring off 2002 kawasaki vulcan nomad

Posted by on

Ad

5 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 51 Answers

SOURCE: kickstand spring popped off, kickstand is now

The kickstand has some kind of safety switch, if the spring is not broke you should be able to snap it back on (with the kickstand up) and have someone to hold the bike or put it on a lift. It might take some muscle or take it to a dealer and I'm sure they can pop it back on. Hope this helps.

Posted on Nov 02, 2009

Ad
  • 653 Answers

SOURCE: I HAVE AN 02 KAWASAKI VULCAN NOMAD would like to

Need to buy a repair manual from Haynes/Clymers as not too many are willing to part with a valuable item

Posted on Mar 24, 2010

  • 3567 Answers

SOURCE: 2005 kawasaki 1600 vulcan nomad

Bummer on the problem. Would it be possible to add a spacer ( washer ), to kill the unwanted space? Any chance that pinching the end of the side stand closed a bit would tighten things up? Other than that, your idea is about all that is left other than a new frame. I suggest the new frame since they only cost $1350.00. Smile, only kidding.

Posted on Mar 16, 2011

afarri
  • 1386 Answers

SOURCE: replaced clutch spring now the

Hello and welcome to FixYa!

Two things... If you have a cable type clutch then the problem will surely be on the clutch cable. If it's worn out it tends not to engage. If you have a fluid type clutch, I suggest that you have the system bleed to flush out air and this can resolve the problem.

Hope this helps and thank you for using FixYa! Have a good one!

Posted on Jul 04, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2011 Kawasaki Vulcan 1700 Nomad excessive oil consumption


Hi, Mike oil consumption is usually caused by a worn out engine with lots of mileage, new engines can also have excessive oil consumption due to improper break in procedures or faulty parts. The general rule of thumb is anything more than 1 quart of oil consumed in 1,000 miles or 1 liter in 1,500 kilometers means it's time for a top end overhaul. The usual suspects are:
1. Piston rings not properly seated (new engines)
2. Piston rings worn past service limits.
3. Damaged cylinder wall or piston.
4. Valves and guides worn past service limits.
5. Valve seals worn out, crushed or no longer attached.
6. Cracked cylinder head.
7. Head gasket failure.
8. Pinched or blocked crankcase breather hose.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
Oil Consumption on my Voyager
Oil consumption VN1500G1 Vulcan Bagger Forums
Kawasaki Vulcan 1700 Nomad Service Manual
OEM Parts for Kawasaki
https://ownersmanuals2.com/make/kawasaki/vulcan-1700-nomad-2011-11000

Sep 10, 2017 | 2011 kawasaki Vulcan 1700 Nomad

1 Answer

2003 Kawasaki Vulcan Nomad 1500 clutch lever is sticking


Hi, Daniel for this scenario you will need your service, parts fiche, and owners manual if you can't find the best tool you ever bought for your Kawasaki, despair not, for a mere zero $0 you can download another one. For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
Clutch is stuck Vulcan Bagger Forums
Kawasaki vulcan clutch issue
How to bleed hydraulic clutch on motorcycle in an extreme case of air...
Kawasaki VN1500 Service Manual
OEM Parts for Kawasaki
2003 Kawasaki Vulcan 1500 Nomad Fi Owner Manual

Jul 15, 2017 | Motorcycles

1 Answer

2001 kawsaki 1500 vulcan nomad gets hot and jumps from 1st to 3rd back to neutral


Hi, Leonard and the usual suspects are:
1. Shifter pawl improperly adjusted.
2. Shifter drum improperly adjusted or damaged.
3. Shifter engaging parts/dogs badly worn or rounded.
4. Shifter forks bent.
5. Damaged gears.
For more information about your issue and valuable "FREE" downloads that you will need please click on the blue links below. Good luck and have a wonderful day.
Neutral problem Vulcan Bagger Forums
2nd slipping into neutral kinda
Kawasaki VN1500 MEAN STREAK Service Manual
OEM Parts for Kawasaki
2001 Kawasaki Vulcan 1500 Nomad Fi Owner Manual

May 04, 2017 | 2004 kawasaki Vulcan 1500 Nomad

1 Answer

2008 Kawasaki Vulcan nomad 1600 wont start. Engine keeps turning over and over but will not start and run on its own. 11,000 miles.


Hi, Gari and the usual suspects are:
1. Fuel tank empty.
2. The fuel tank has old dead gas.
3. Fuel tank bottom contaminated with ethanol sludge, dirt, water, rust, etc.
4. Fuel supply valve/petcock turned off.
5. Fouled spark plugs.
6. Engine flooded as a result of overuse of the enrichner.
7. Vacuum hose to the fuel supply valve/petcock disconnected, broken, cracked, or pinched.
8. Fuel valve/petcock or filter clogged.
9. Fuel line to carburetor or throttle body pinched, kinked or blocked.
10. Carburetor float stuck.
11. Fuel injectors clogged.
12. A severely discharged or damaged battery, you need 12.5 volts or better and be able to pass a load test if necessary.
13. Check battery terminals for damage or corrosion, check the battery cables at "BOTH" ends for loose, corroded, or broken connectors, "INSIDE" and outside the cable harness, perform connector wiggle test and check cables with an ohmmeter if necessary.
14. Loose or corroded wire connection at the coil or plug between ignition sensor and ECM module.
15. Spark plug cables in bad condition and shorting check for spark leakage in the dark, cable connections loose, or connected to the wrong cylinders.
16. Ignition timing incorrect due to a faulty ignition coil, ignition module or MAP, CMP, CKP, O2, TPS, ETP, IAC sensors.
17. Faulty neutral, clutch lever, or kickstand safety switch.
18. Faulty fuel pump or fuse or relay.
19. A stuck bent or burnt valve.
20. Tilt sensor needs a reset.
21. Security system not disarming alarm needs a reset.
22. Check for engine trouble codes.
For more information about your issue and valuable "FREE" downloads that you will need please click on the blue links below. Good luck and have a wonderful day.
05 Nomad 1600 FI won start
What to do When Your Motorcycle Won Start
Kawasaki VULCAN 1600 NOMAD Service Manual
OEM Parts for Kawasaki
http://mybikemanuals.com/kawasaki/kawasaki-vulcan-owners-manuals

Apr 29, 2017 | 2008 kawasaki Vulcan 1600 Nomad

1 Answer

1500 Kawasaki Vulcan kick stand spring keeps coming off


Check for Up and Down play at end of kickstand. Usually these bikes will wear the kickstand mount on the Frame - wears like a half moon into it. At the same time it spreads out the Kickstand so that it can start flopping enough for the spring to come loose and fall off. To fix it - Replace kickstand, Spring, AND the Bolt. Then grind the Frame on the other side of the Half moon around the hole until it is LEVEL. Find a Washer (Stainless - .030 - .050 depending on how much you had to grind) and insert it between the Frame and the Kickstand. I have done DOZENS through the years and Never had to do it twice on the same bike. The Washer acts like a Bushing and prevents future wear. Good Luck!

Oct 10, 2013 | 2003 kawasaki VN 1500 Vulcan Classic

1 Answer

How to replace the kickstand sensor switch on a 2007 kawasaki vulcan 900 cl


The kickstand sensor on these bikes is just a simple open/short module with a spring loaded switch to activate it. Replacing it is simply a matter of disconnecting the wiring, unbolting the old sensor, replacing the module, bolting it in, and connecting the wire.

Nov 17, 2012 | 2007 kawasaki Vulcan 900 Classic

2 Answers

Need radator for kawasaki vn 1500 classic tourer 2001 is the driffter the same radator as the vn 1500 classic plz hellllllllllllp


TO ALL VN1500 OWNERS....This once happen to me,
I went to the garage to start the bike "Nothing ""The first thing is the lights are bright but no turning over,Next you think the solenoid is kaput but the answer was very simple and the fix takes 30 seconds..
Do not take the bike to bits looking for other problems and look at the clutch leaver and you will see some wires going into a plastic shroud going into the switch in the clutch leaver, Make sure this has not popped out if its connection as it some times may do after a few years due to constant turning on the handlebars,
When this is not connected you will have a bike that will not fire up but comes alive and you will hear a clicking noise but this is from the engine carb area and every function of the bike will work but it will not turn over, Worth looking at and saves sixteen quid for a starter unit you never needed.

Feb 06, 2012 | kawasaki VN 1500 Vulcan Classic Tourer Fi...

1 Answer

2002 Kawasaki VN 1500 Vulcan dies when put into gear


Hi, Kdompe357 and the usual suspects are:
1. Faulty wiring to any safety switch.
2. Safety switches loose at the mounting point.
3. Faulty kickstand safety switch.
4. Failed kickstand safety switch circuit diode.
5. Stretched side stand spring.
6. Side stand not coming up far enough to disengage switch.
7. Faulty clutch lever safety switch.
8. Faulty neutral safety switch.
9. Clutch not properly adjusted.
10. Clutch plates sticking, forward lurch
For more information about your question and valuable "FREE" downloads that you will need please click on the blue links below. Good luck and have a wonderful day.
Vulcan 800 Classic Stalls When Shifting Into 1st
Stalls when putting into gear first time
Suzuki VL1500 Service Manual
OEM parts for Suzuki
Suzuki Intruder VL1500B Owner Manual

Jun 24, 2017 | 2002 kawasaki VN 1500 Vulcan Meanstreak

1 Answer

2005 kawasaki 1600 vulcan nomad kickstand spring has fallen off due to galled and worn shoulder bolt (which fastens it to the frame). Also the cast metal piece that the kickstand (clevis) attaches to is...


Bummer on the problem. Would it be possible to add a spacer ( washer ), to kill the unwanted space? Any chance that pinching the end of the side stand closed a bit would tighten things up? Other than that, your idea is about all that is left other than a new frame. I suggest the new frame since they only cost $1350.00. Smile, only kidding.

Mar 16, 2011 | kawasaki VN 1500 Vulcan Classic Tourer...

1 Answer

Kickstand spring popped off, kickstand is now loose and biks will not start even with kickstand down. problem is on a 2003 kawasaki 1600 vulcan classic


The kickstand has some kind of safety switch, if the spring is not broke you should be able to snap it back on (with the kickstand up) and have someone to hold the bike or put it on a lift. It might take some muscle or take it to a dealer and I'm sure they can pop it back on. Hope this helps.

Nov 01, 2009 | 2003 kawasaki VN 1500 Vulcan Classic

Not finding what you are looking for?
2002 kawasaki VN 1500 Vulcan Classic Logo

Related Topics:

205 people viewed this question

Ask a Question

Usually answered in minutes!

Top kawasaki Experts

Arnie Burke
Arnie Burke

Level 3 Expert

4536 Answers

yadayada
yadayada

Level 3 Expert

76846 Answers

bazzz7071
bazzz7071

Level 2 Expert

342 Answers

Are you a kawasaki Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...