Question about 1996 Honda VF 750 C Magna

1 Answer

Headlight lamp replacement - 1996 Honda VF 750 C Magna

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 10 Answers

There is 1 screw that holds the headlight rim to the housing, remove it.
once it is out you should be able to access the old bulb. Carefully remove the plug then turn the bulb and pull it out. Be careful when putting the new bulb in, Don't touch the glass, the oils from your fingers can damage the bulb. I hope this helps.

Posted on Jan 18, 2013

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Replacing front headlight lens on 1985 Toyota Tercel


    How to change a Toyota Tercel headlight lamp - YouTube

    ? 4:06
    www.youtube.com/watch?v=B9dj0o5KIxc
    Apr 22, 2013 - Uploaded by NewEnglandgardening I replaced both headlight lamps on my 1996 Toyota Tercel. ...How To Install Replace Headlight and Bulb Toyota Corolla 98-02... Rear brake shoe replacement Toyota Tercel 1991-1998 Paseo Drum brakes Install Remove ...

Sep 27, 2015 | Toyota Cars & Trucks

2 Answers

All of my running lights and blinkers work and high beams but no low beams on my 1997 Chevrolet TahoeA


Headlamps Inoperative - Low Beams

Step

Action

Value(s)

Yes

No

DEFINITION: This diagnostic procedure should only be used if the high beam headlamps are operating properly and the low beams are inoperative.

1

Did you perform the Headlights System Check?
--
Go to Step 2
Go to Headlight System Check

2

  1. Turn the headlamp and panel dimmer switch to the ON position.
  2. Move the headlamp dimmer switch to the LOW position.
  3. Backprobe the headlamp dimmer switch connector with a J 35616-200 from cavity A to ground.

Does the test lamp light?
--
Go to Step 3
Go to Step 5

3

  1. Remove the daytime running lamp relay.
  2. Connect a J 35616-200 at cavity G5 to ground.

Does the test lamp light?
--
Go to Step 4
Go to Step 6

4

  1. Re-install the daytime running lamp relay.
  2. Backprobe cavity B at the high/low beam headlamp with the headlamp dimmer switch in the LOW position.

Does the test lamp light?
--
Go to Step 7
Go to Step 8

5

Replace the headlamp dimmer switch.

Is the repair complete?
--
Go to Headlight System Check
--

6

Repair the open in CKT 359 (PPL) between the headlamp dimmer switch and the daytime running lamp relay.

Is the repair complete?
--
Go to Headlight System Check
--

7

Replace the high/low beam headlamps.

Is the repair complete?
--
Go to Headlight System Check
--

8

  1. Inspect for an open in CKT 12 (TAN) between the daytime running lamp relay and S120, repair as necessary.
  2. Replace the daytime running lamp relay if no open was found in CKT 12 (TAN) between the daytime running lamp relay and S120.

Is the repair complete?
--
Go to Headlight System Check
--

Jul 24, 2015 | Chevrolet Cars & Trucks

2 Answers

Help Only one headlight working


It could be a broken wire on the wire harness or a bad fuse.

Mar 11, 2014 | BMW 1 Series Cars & Trucks

1 Answer

How do you change the headlight


On a Newer Vehicle you'll replace the Headlight Bulb
Open the engine compartment hood.

Locate the back of the headlight to determine the lamp and bulb type.
Decide which bulb you need to replace.
Purchase the correct bulb for your headlamp.
Behind the headlight the lamp the socket is removable.
Remove Socket then replace lamp (bulb).
Carefully re-install the socket


On Older vehicles:


Remove the screws that connect the headlamp frame to the
bracket holding the headlamp. Make certain you turn only
the screws that hold the lamp frame, not the adjusting screws.
Disconnect the electrical connector in the back of the lamp
by pulling the socket away from the headlamp with your hand.
Remove the headlight from the bracelet area and discard it.
Replace with the new headlight, making sure that it is positioned
right side up.
Plug the wire socket into the new headlight, which holding the
headlight securely.
Replace the headlight into the frame.
Place the frame onto the headlight bracket.
Reattach the screws to hold the frame and bracket in place.
Do not adjust the setting screws for the direction the headlight
shines.


At night partk in front of a wall and shine your lights on the wall
so see if the headlight shifted during installation.

Jul 14, 2012 | Cars & Trucks

1 Answer

Replace side marker lamp near headlight


locate first the screw if it is attached separately from the headlight..if it is attached on the headlight unscrew all bolts attaching the headlights to the main frame..after it you can easily unplug or detach the marker lamp bulb..but if it is separately attach to the headlight open up the hood of your car there you can easily see or find the back part of the marker lamp..simply squeeze it going to the left side to detach the marker lamp..then simply unplug the lamp and replace it easily...

Mar 09, 2011 | 2007 Chevrolet Tahoe

1 Answer

Replace head light bulb


I have a 2001 Windstar and can help you with your question. The headlight lamp is easy to replace. Open the hood and reach behind the headlight assembly. Carefully grasp the lamp and turn it counter clockwise. Once the lamp is out, remove the wire pigtail. Replace the lamp and reinstall. A real easy fix.

Jan 09, 2011 | 2000 Ford Windstar

2 Answers

How to replace headlights bulbs in a grand cherokee 2001


  1. Remove the jack screw attaching the top of the head lamp to the head lamp mounting module.
  2. Grasp the upper inboard and lower outboard corners of the head lamp and pull the head lamp outward.
  3. Remove the bad bulb socket from the head lamp module and remove bulb from socket.
  4. Install new bulb into socket and reinstall socket into head lamp module.
  5. Position the head lamp on the vehicle and align the ball studs with the sockets.
  6. Push the head lamp inward to secure the ball studs with the sockets.
  7. Install the jack screw attaching the top of head lamp to the head lamp mounting module.
Do not touch glass of halogen bulbs at the oil can cause the headlight to blow out

Nov 12, 2009 | 2001 Jeep Grand Cherokee

1 Answer

How do I replace the headlight assembly on a 2006 sebring?


  1. Remove the front bumper cover
  2. Remove the upper headlight housing mounting bolt and pushpin
  3. Remove the lower headlight housing mounting bolts
  4. Pull out the headlight housing assembly and disconnect the electrical connector.
Its pretty easy. Just raise the hood, see the two silver 8mm cap screws on top of the cross member that supports the radiator and fan assembly. Two screws on each side above the headlight housings. The outer screw is right next to the corner of the fender when the hood is raised. Remove the two screws, then the headlight assembly is loose. Just gently pull the headlight assembly forward enought to see the three lamp socket holders on the back side of the headlight assembly. From the outside corner to the inside are first, the parking turn signal, then the low beam lamp and finally the last, the high beam lamp. To remove the lamp socket, push the small plastic locking tab and turn the socket assemby counter clockwise about a half turn and remove the lamp. Now you can replace the lamp and install it back the same way you took it out. Don't touch the new lamp glass with your bare fingers. Oil from you skin will absorb into the glass causing the glass to turn dark and shorten the lamp life. 

May 04, 2009 | 2006 Chrysler Sebring

1 Answer

How do you replace a burnt out headlight on the Silverado 2001


open hood and on the very top of head lamp housing there are two L shaped rods that push down to hold lamp assembly in turn rods ad remove,Lamp assembly pulls out and headlight can be accessed.

Oct 19, 2008 | 2000 Chevrolet 2500

1 Answer

Headlight needs replaced can't remove blub. please advise


just changed headlight out in my 86 300zx today. have to have headlights up. there is a casing around the lights (highlight/fog), screw on each side that has to be removed. bottom of casing snaps out... then you have to unscrew the screw that is on top side of lamp and on the inside of the lamp (inside meaning towards middle of car) enough to get headlight out of posiiton, but don't forget you have to unplug the wiring from the back of the headlight from the back of the lamp.. thru under the hood... i know clear as mud right.. :) then change out lamps and put back together... :)

Sep 17, 2008 | 1986 Nissan 300ZX

Not finding what you are looking for?
1996 Honda VF 750 C Magna Logo

Related Topics:

86 people viewed this question

Ask a Question

Usually answered in minutes!

Top Honda Experts

Arnie Burke
Arnie Burke

Level 3 Expert

4525 Answers

yadayada
yadayada

Level 3 Expert

76164 Answers

Mike

Level 3 Expert

4340 Answers

Are you a Honda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...