Question about kawasaki Motorcycles

Open Question

Connecting er6n to obd - kawasaki Motorcycles

Posted by on

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Whenever I park on a slant my 2010 er6n leaks something from under the engine out of a small tube?


I'd say it is nothing to worry about. There are two common possibilities, both normal:

- a little excess from the coolant overflow holding tank
- condensation from the A/C drain hose
.

Mar 19, 2016 | Cars & Trucks

1 Answer

Whats this little bugger


Probably extra (or)bparts from a repair or rebuild. Ask the previous owner.

Oct 30, 2013 | Motorcycles

1 Answer

Starter motor making funny noise on my bike Kawasaki er6n


hubby says its the teeth on the starter grinding - the teeth are worn - time for a new starter

Apr 19, 2013 | Motorcycles

1 Answer

When riding, the speedo needle goes from current speed to 0 then all the way round to max speed then finally settles on current speed. If you could offer any help please, this is a 2009 ER6n with 4440...


Here's a list of things to check. The meter itself will have a wire that supplies it with 12V and a ground wire. It could have another wire that powers the dash lights. Either of the former could have a corroded or loose wire connection somewhere. Also check the wire between the sensor and the meter for the same problem.

Hall Effect Sensors normally work and then quit completely, although they may "wake up" the next morning when everything has cooled down. Other times they work fine and then die totally. Since the meter works on and off, then I don't suspect the sensor. The other possibility could be the circuit board inside of the meter itself or the little motor the needle is attached to if it's an analog meter (digital displays don't have the motor). I guess a solder joint could be broken loose inside, but were it me, the sensor and meter would be the last things I'd suspect.
also check the speedo couplings and connections, a good ground is essential

Jul 12, 2011 | 2009 kawasaki ER6n

1 Answer

My ER6n wont start the starter motor does not fire it just makes a buzzing noise,any ideas


Charge your battery over night on a proper battery charger (not an optimate or similar) and them it should be fine. If the battery won't charge, it's time for a new one.

All the best

Jul 02, 2011 | 2008 kawasaki ER6n

3 Answers

Check engine light is on engine is missing and fuel mileage has droped 4 mpg where is connector for 95 ply grand vog


OBD 2 connecotr is usually under dash on driver side. But OBD 2 did not start officially until 1996.

OBD 1 before that. Could be under hood.

Jun 24, 2011 | 1995 Plymouth Voyager

1 Answer

Kawaski er6n 2008, city/side light works but both main light & high beam lights not working, fuse is fine.


it has to be your bulb, if there is any doubt go to the dealer and plug one in before buying it.Ride Safe!

Feb 25, 2011 | 2006 kawasaki ER-6f

1 Answer

Hi is it a clockwise or ant iclockwise thread on


if there is no locking tag then the nut tightens up in the revers way the sprocket turns in drive

May 05, 2010 | 2006 kawasaki ER-6n

1 Answer

What are the correct tyre pressuer for kawasaki er6n please


manuel says 32 front and 41 back tires say 41/41 i run manual pressure and get a smooth ride

Jun 12, 2009 | 2006 kawasaki ER-6n

Not finding what you are looking for?
Motorcycles Logo

Related Topics:

37 people viewed this question

Ask a Question

Usually answered in minutes!

Top kawasaki Experts

Arnie Burke
Arnie Burke

Level 3 Expert

4514 Answers

yadayada
yadayada

Level 3 Expert

75197 Answers

Gino Cussen
Gino Cussen

Level 2 Expert

216 Answers

Are you a kawasaki Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...