Question about 2004 Yamaha YZF-R6

1 Answer

Clutch not disengaging - 2004 Yamaha YZF-R6

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Expert
  • 314 Answers

Slippage

  • Slippage is a clutch problem that occurs when the pressure plate is unable to hold the friction disc against the flywheel tightly when the clutch is engaged. This causes the disc to rotate at a different speed than the flywheel. The high temperature caused by friction against the disc will eventually damage the clutch plate and necessitate a replacement. On clutches with mechanical linkage, adjustment can forestall replacement for a time.
    If you notice the engine revving abnormally as the clutch is released, and the car accelerates gradually, then it could be a slippage problem. It's possible that grease or oil on the disc is causing the slippage or the engine mount could be broken, causing the linkage to be bound up by an improperly moving engine.
    Another common cause of slippage is when the friction plate is simply worn out from use. A clutch will not last forever, and over time the clutch will begin slipping. Adjustments will not fix this problem, as a worn out friction plate will require complete replacement.
Vibration
  • A grabbing or chattering clutch is an indicator that there is a problem inside the clutch mechanism. It is an easily noticed problem. Symptoms include a vibration or jerking as the clutch is released, especially when accelerating from a stop. This problem may be the result of a damaged or broken disc, flywheel or pressure plate. It may also be caused by loose springs or worn engine mounts, according to the Integrated Publishing website on Clutch Troubleshooting.

Posted on Jan 11, 2013

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I put a slave cylinder in my 97 mazda but the clutch will still not disengage but it moves the fingers on the clutch


Clutch disk could be in backwards.
Slave cylinder may have an adjustment that needs to be extended.
Pilot bearing could be bad and keeps the pilot shaft spinning. (simulates clutch not disengaging)
Pivot pin of the throw out arm could be worn down.

May 13, 2014 | 2005 Mazda B2300 Regular

2 Answers

Clutch won't disengage on my Riding Mower


WITH THE ENGINE TURNED OFF, open the hood and watch the engagement cable. engage mower lever and then disengage the switch sounds happy, possibly the cable is starting to seize up

Apr 19, 2014 | Husqvarna Garden

1 Answer

Disengage clutch kenmore sewing machine


http://www.shopyourway.com/manuals/9253 is the manual. Turn the center of the handwheel knob toward to you to disengage the clutch.

Dec 26, 2013 | Kenmore Sewing Machines

1 Answer

Mulcher repair


follow this steps and fix it. God bless you

Clutch

If the chainsaw chain does not engage the clutch assembly might be worn out. The clutch is similar to an automotive clutch. The chain sprocket is attached to the clutch drum and there are clutch pads underneath. As the pads wear out the clutch assembly no longer engages with the motor and the chain does not engage either.

Clutch Band kit

Chainsaws are equipped with a clutch band, a steel band that wraps around the clutch drum and is activated by the emergency stop lever. If the lever does not disengage the chain does not engage. Check to be sure the stop lever is disengaged. Adjust the clutch band if necessary.
Enter your model number to see parts for your chainsaw.
Help me find my model number picunavailable175.jpg

Drum Brake

Chainsaws are equipped with a clutch band drum brake, a steel band that wraps around the clutch drum and is activated by the emergency stop lever. If the lever does not disengage the chain does not engage. Check to be sure the stop lever is disengaged. If necessary, adjust the clutch band drum brake.5bf7a198-4466-44ee-8866-ccfc5b95f0ac.jpg

Nov 24, 2013 | Garden

1 Answer

Clutch would not disengage


IF you have bled the clutch system and managed to get a firm clutch then the clutch plate has been installed back to front and the clutch center is hitting the bolts that hold flywheel onto the crankshaft. If you have no not got a firm predal pressure replace the clutch master cyl

Mar 02, 2013 | 1989 Ford Ranger

4 Answers

What's your problem?1995 yamaha virago 1100 that sometimes you you put into gear and immediately dies


The Clutch on some bikes will disengage the starter motor. Yamaha will not allow you to engage gear when the side stand is down. Hope this gives you some idea

Nov 27, 2011 | Yamaha Motorcycles

1 Answer

Clutch not disengaging when clutch lever is depressed.


Assuming the clutch cable is intact and adjusted properly at the handlebars, the normal things that would cause the clutch to fail to disengage are extremely dirty oil or that synthetic lubricant has been used in the gearbox instead of 10w40 motor oil. Synthetics can cause the cork on the fiber clutch plates to swell. This causes the clutch to stay engaged. Extremely dirty oil can also cause the clutch to fail to disengage. If the oil is dirty, change it then ride for 30 minutes and change it again to flush out the grit. Please rate my answer. Thanks.

Feb 16, 2010 | 2004 Yamaha YZ 250

2 Answers

2000 yamaha blaster wont disengage


Without power to the clutch and trans alot of bikes will not disengage. Only when running

Oct 13, 2009 | 2001 Yamaha TW 125

1 Answer

Fixing a clutch that suddenly stopped disengaging properly.


that is a hydraulic clutch and when they go out they dont always give warning. but it could be a leak in the line or just low on fluid and needs bled.

Jan 14, 2009 | 1992 Toyota Celica

1 Answer

Bobbin clutch just spins


Clutch is disengaged only for winding thread onto the bobbin.

When done, re-engage (tighten) clutch and with bobbin in bobbin case, hold needle thread, rotate handwheel until needle is top centre of it's motion then pull threads thru allowing approx 100mm (4") slack .....you are ready to sew.

If this isn't what you were asking, then I'm not sure why you have disengaged the clutch, so more detail please.

Feb 14, 2008 | Sewing Machines

Not finding what you are looking for?
2004 Yamaha YZF-R6 Logo

189 people viewed this question

Ask a Question

Usually answered in minutes!

Top Yamaha Experts

dhnguyen

Level 2 Expert

281 Answers

Steve Sweetleaf
Steve Sweetleaf

Level 3 Expert

1144 Answers

Tony

Level 3 Expert

2600 Answers

Are you a Yamaha Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...