Question about 1996 Honda VF 750 C Magna

2 Answers

I have a 1996 honda magna 750C. When I turn on the power, everything works except the headlight. Neither low or high beam work and the highbeam indicator does not light up either. Toggling the high-low switch has no effect. Fuses are all ok. All other power is ok.

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 4 Answers

THANK YOU! THANK YOU! THANK YOU! "The head light wires go through the start button" I was having problems with the contacts in my start button and didn't realize that the intermittent problem with the headlight was caused by the same thing!

Posted on Sep 24, 2013

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 15 Answers

If its not fuses then its either the bulbs or the relay

Posted on Jan 11, 2013

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

kelly_rob828
  • 1 Answer

SOURCE: I have a 1995 honda magna 750C. When I turn on the

I had a similar issue , and it would not turn over to start. Took apart the start button and cleaned it and realigned tabs of contact switch and it worked. The head light wires go through the start button so this turns the head light off so all power goes to starter to not pull as much power when cranking .

Posted on Dec 21, 2012

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Why wont the Headlight and Highbeam indicator wont work


Does the headlight itself work? Will it switch from low beam to high beam? If the lights work but just the indicator is bad, then perhaps the problem is in the indicator socket (corrosion or loose connection) or the wiring to the indicator (bad connector, break in the wire or printed circuit board trace). If the lights don't work, it could be the handlebar switch is failing but it's more likely to be the wiring coming from the bars to the handlebar pivot area.

May 06, 2014 | 2006 Honda VTX 1300 S

1 Answer

One of my turn signals wont work, both my headlights only work on highbeams


replace the high beam switch which causes this problem. Also clean the terminals for the directional light bulb. That will cause a negative continuity to the bulb

Sep 01, 2012 | 1996 Mazda MX-5 Miata

1 Answer

Headlight Problem


Check the bulb...sounds like low beam filiment has gone

Feb 27, 2012 | 1996 Honda VF 750 C Magna

2 Answers

I have a 1995 honda magna 750C. When I turn on the power, the high beam indicator comes on, but the headlight does not. Toggling the high-low switch has no effect. Fuses are all ok. All other power also...


I had a similar issue , and it would not turn over to start. Took apart the start button and cleaned it and realigned tabs of contact switch and it worked. The head light wires go through the start button so this turns the head light off so all power goes to starter to not pull as much power when cranking .

Aug 25, 2011 | 1995 Honda VF 750 C Magna

2 Answers

1992 lexus sc 400 headlights only work on highbeam flash position? could it be the switch


try checking the fuse first highbeam and dipped use different fuses.

Jul 29, 2010 | 1992 Lexus Sc 400

1 Answer

My left headlight highbeam light works and the lowbeam don't why


the filament on the low beam burnt out. but the high beam didn't. You have a filament for each. 1 for high beam and 1 for low beam in the same light bulb. You need a new head light.

Sep 07, 2009 | 1998 Ford Windstar

1 Answer

Dynasty headlights


it is ur switch that changes it from low beam to high beam
[ turn singnal switch]

Feb 15, 2009 | 1990 Dodge Dynasty

2 Answers

My headlights only work on highbeam.


Yes there is a relay switch that allows the low to high beam switch to occur. It shoud be mounted under the hood along the firewall. Check your manual too!

Thanks,

Mark

Dec 30, 2008 | 2002 Mitsubishi Lancer

1 Answer

Highbeam Headlights not working


try replacing the fuse because low beam and high beam are two different systems

Aug 07, 2008 | 1996 Chevrolet Cavalier

Not finding what you are looking for?
1996 Honda VF 750 C Magna Logo

295 people viewed this question

Ask a Question

Usually answered in minutes!

Top Honda Experts

Arnie Burke
Arnie Burke

Level 3 Expert

4514 Answers

yadayada
yadayada

Level 3 Expert

74896 Answers

Gino Cussen
Gino Cussen

Level 2 Expert

216 Answers

Are you a Honda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...