Question about 2008 Sym Jet Red Devil 50

Open Question

Derestrict sym red devil 50 - 2008 Sym Jet Red Devil 50

Posted by Anonymous on

Ad

3 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 45 Answers

SOURCE: sym shark 50 cc won't start. Battery ok, but

have you checked the vacuum tap to see if its working simply remove the smaller diameter hose from the carb and the fuel line its self **** small one to create vacuum and fuel shold come from fuel line if not the tap could be just blocked or the diaprham could be damaged in the tap

Posted on Dec 16, 2009

Testimonial: "Thanks I'll check it tonight"

Ad
  • 4 Answers

SOURCE: hi I have a sym red devil and have trouble

souds like the auto bystarter isn't working (basicly an electric choke)it is about an inch and a half high will be black and on the carby with 2 or 3 wires coming from it (very promonent on the carby)

Posted on Jan 24, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to derestrict 2003 piaggio lt50


Hi, Jane for more information about your question and valuable "FREE" downloads that you will need please click on the blue links below. Good luck and have a wonderful day.
How do you derestrict scooter using Piaggio 50cc 2T engine
How to derestrict 50cc scooter
PIAGGIO Liberty 50 Catalyzed Workshop Manual
https://www.oemmotorparts.com/oem2.asp?M=piaggio
PIAGGIO ZIP 50 2T User Manual

Mar 19, 2017 | Piaggio Motorcycles

1 Answer

How do you derestrict a sym fiddle 125cc


remove ring from inside exhaust pipe

Feb 10, 2014 | Sym Motorcycles

1 Answer

Sym red devil feels sluggish


Instructions
    • 1 Locate the red button on the top of the handlebars. This is called the "kill switch." When you pull it up the engine can run; when you push it down, the engine will shut off immediately.
    • 2 Pull the kill switch up.
    • 3 Turn the key to the "on" position.
    • 4 Make certain the cord running from the key is attached to the steering column. This device acts in the same manner as the kill switch - the engine will run only when it is secured.
    • 5 Pull the start cord, which looks like an enlarged lawnmower pull-cord and is generally found on the right side of the machine.
    • 6 Listen to the engine - if it starts, let it get going slowly . If it "pops" but does not continue to run, try pulling the start cord a few more times. If you do not hear the engine turn over at all, proceed to the next step.
    • 7 Find the pull tab under the right side of the handlebars. This is called the choke - it often has a circle with a diagonal line through it. The choke helps to start an engine when the weather is very cold or the machine hasn't been used in a while. When using the choke, try leaving it on only long enough to hear the engine fire a couple times, then return it to the "off" position. A choke left on too long can flood the engine.
    • 8 Place the choke in the vertical position - this is called the half choke position. Pull the start cord several times. If the engine fires up, place the choke back down to its original position and let it slowly warm up. If the engine still has trouble starting, proceed to the next step.
    • 9 Pull the choke 180 degrees from its original position - this is called the full choke. Pull the start cord until the engine sputters a couple times.
    • 10 Replace the choke to the original off position and continue to pull the cord. The engine should fire up and settle into a steady hum, ready for fun in the snow.

Jan 15, 2013 | 2008 Sym Jet Red Devil 50

1 Answer

Hi I have a sym red devil and have trouble starting it in the morning.when you spray carb cleaner in to the air filter it will start but next day it wont start again. does a sym red devil have a choke...


souds like the auto bystarter isn't working (basicly an electric choke)it is about an inch and a half high will be black and on the carby with 2 or 3 wires coming from it (very promonent on the carby)

Nov 07, 2009 | 2004 Sym Husky 125

3 Answers

It starts but only goes 10mph top speed


It's in need of gas or air. Start by removing air filter, if that don't help try choking it while riding it thus giving it more fuel. If that don't work repost the problem withas much info as you can. Could be anything from a bad plug to a jumped timing chain.

Sep 26, 2009 | 2004 Sym Husky 125

1 Answer

Sym jet 50 wiring


Hi, i can't exactly tell you which wire to join to which one, but i can provide you with a wiring diagram, so, hopefully, you can make it out yourself :) http://www.scribd.com/doc/9811756/SYM-Jet-Euro-Electrical-Diagram

Jun 15, 2009 | 2000 Sym Husky 125

Not finding what you are looking for?
2008 Sym Jet Red Devil 50 Logo

Related Topics:

51 people viewed this question

Ask a Question

Usually answered in minutes!

Top Sym Experts

Arnie Burke
Arnie Burke

Level 3 Expert

4536 Answers

Dave Matthews
Dave Matthews

Level 2 Expert

97 Answers

yadayada
yadayada

Level 3 Expert

76846 Answers

Are you a Sym Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...