Cant find torque for head bolts on 1996 toyota tercel with 1.5 cant find a repair manual nobody can find one tryed all parts stores
The cylinder head bolt torque is a 2 step process.
First: Torque all of the bolts to 45 Nm (450 Kgf-cm or 33 ft lbs.)
Replace any head bolt that will not torque to the above specs.
Second: after all ten bolts are torqued to the above specs, the head bolts are then "Torqued to Distance"...
Starting at the center bolts, retorque all ten bolts an additional 90 degrees.
Hope this helps, the graciousness of a FixYa rating would be greatly appreciated.
1993 L4 headbolt sequence:
they appear to be the same,other than the torque angle. good luck!
FixYa. Roger
1,599 views
Usually answered in minutes!
what should I torque the head bolts to in ft lbs
torque de calat
×