Question about 2008 Suzuki RMZ250

Open Question

Suzuki rmz 250 engine won't turn over

Engine won't turn over

Posted by Anonymous on


6 Suggested Answers

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

cape cod bob
  • 292 Answers

SOURCE: 08 suzuki rmz 250 backfires

timing and fuel/air mix

Posted on Apr 01, 2009

  • 47 Answers

SOURCE: Engine stalling when at operating temperature

sounds like flotes are stuck check this also choke may be on just a fraction to flood the carb

hope this helps

Posted on Jun 17, 2009

  • 12 Answers

SOURCE: rmz 250 04 model wont idal or kick start

Like I told somebody earlier to day lower the octane rating of the gas you are using....repost if you need anything futher......

Posted on Jun 22, 2009

  • 28 Answers

SOURCE: My suzuki rmz 250 2004 was under the last week i


Posted on Aug 06, 2009

  • 86 Answers

SOURCE: 250 RMZ engine torque specs.

what do you need to know? head barral is 38nm and cam carriers are 10nm most 6mm nuts and bolts are 10nm. hope this helps.

Posted on Mar 10, 2010

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Rmz 250 engine

could be the shifting paw

Apr 05, 2014 | 2004 Suzuki RM-Z 250

1 Answer

Gearbox oil change on a suzuki rmz 250 2010 model

Is this a 2 cycle or 4 cycle motorcycle?

I am not familiar with this model. Typically, motorcycle transmissions are lubricated with engine oil. Do you not have a owners manual for your 3 year old motorcycle? Check behind the side covers or better yet, check with your Suzuki dealer.

Thanks for your interest in

Feb 28, 2013 | Motorcycles

2 Answers

I've got an 2010 rmz 250 runs fine when cold and

Sounds like the valves are out of adjustment.

Oct 25, 2011 | 2005 Suzuki RM-Z 250

1 Answer

Witch marks on magnitio i use to set valve timing in a 2004 rmz 250

With the valve rocker covers off and magneto inspection plug and centre plug removed, turn motor using nut on magneto, counter-clockwise until a line appears centrally in the inspection window. This will be at Top Dead Centre (TDC).
To check this, all rockers should at rebound with all valves closed. There should be a tiny amount of play on all rockers.
If not, (being a 4 stroke) rotate motor one full turn counter-clockwise.
All engine work or strip downs must commence from the position of TDC.

Nov 14, 2010 | 2004 Suzuki RM-Z 250

2 Answers

Rmz 250 valve problems

Yes, it is a valve problem. It sounds like a weak intake valve is dishing / stretching due to overheating. The exhaust valves are made to better withstand the heat. Check for cooling problems when you replace and seat a new valve.

May 24, 2010 | 2004 Suzuki RM-Z 250

1 Answer

I've lost 2nd gear on my rmz 250 suzuki 2005, does anyone know if you need to split the engine or can you get to the gears any other way?

hi,no easy answer i,m afraid,you will have to split the engine,before you pull it all aprt check the shift drum selector rawl pins,if one of those has come out,it will not shift up into the next gear,hope this helps...cheers

May 03, 2010 | 2005 Suzuki RM-Z 250

1 Answer

No oil being pumped to top of engine.

One oil filler, check your manual or download one from one of the manual sites on fixya. Quantity is written on crancase generally, or dipstick on filler plug, The oilpump, pumps the oil throughout engine.

May 03, 2010 | 2004 Suzuki RM-Z 250

1 Answer

My rmz 250 wont start on the first kick when the choke is on but when the engine is on and hot it starts first kick with no choke?????????

It takes a little suction for the gas to reach the cylinder from the carb. When it is hot and on, the gas is readily available. So a kick or two, when cold starting is not abnormal. Alternatively, kick twice with the key in off position. Then turn the key on and kick, the engine will start instantly. Idea is the make the gas reach the inlet.

Feb 13, 2010 | 2004 Suzuki RM-Z 250

1 Answer

250 RMZ engine torque specs.

what do you need to know? head barral is 38nm and cam carriers are 10nm most 6mm nuts and bolts are 10nm. hope this helps.

Jan 25, 2010 | 2004 Suzuki RM-Z 250

Not finding what you are looking for?
2008 Suzuki RMZ250 Logo

Related Topics:

41 people viewed this question

Ask a Question

Usually answered in minutes!

Top Suzuki Experts


Level 3 Expert

79847 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

4888 Answers


Level 2 Expert

83 Answers

Are you a Suzuki Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides