Question about 2007 Yamaha AG 200 E

1 Answer

How can i improve the performance of yamaha AG200 which has travelled 8900km trouble areas shock obsorbers and the engine

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 16 Answers

AG bikes are not designed for performance. If the bike is working as intended by Yamaha, then it is for farm use only. If the suspension is leaking oil or become 'springy' then new fork seals and a back shock replacement or rebuild may be needed. If you want the engine to go faster then you need to seriously look at buying another bike because the AG200 is not designed to go 'fast'. If you are after a trial bike you might want to look at Honda CRF250L, XR250/400, Yamaha XT or TTR250, TT350, Kawaski KLX range. Enduro bikes: Yamaha WRF250/450, Honda CRF250X/450X, Suzuki DRZ400, RMX250, Kawasaki KDX200 (2 strokes are easier and cheaper to rebuild) so my choice would be RMX, KDX, DT200, Husky WR250/300, KTM300 - these are cheap 2nd hand too! Don't buy a bike that is way out of your ability range. Ride on!

Posted on Jan 10, 2013

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

AG 200valve timing marks


Hi, Anonymous for this scenario you will need your service/owners manual if you can't find the first and best tool you ever bought for your Yamaha, despair not, for a mere $0 you can download another one. For more information about your issue and valuable "FREE" downloads that you will need please click on the links below. Good luck and have a nice day.
AG200 Central everything about the Yamaha AG200 motorcycle
XR 200 timing marks
http://mybikemanuals.com/yamaha/yamaha-ag-owners-manuals
OEM parts for Yamaha
http://www.pdfmotomanual.com/index.php?r=site/page&view=manuales&order=t&key=&make=1752&lang=ENG

Apr 18, 2014 | 2007 Yamaha AG 200 E

1 Answer

Carburetor


Hi, Anonymous and the usual suspects are:
1. Fuel tank empty.
2. Fuel supply valve/petcock turned off.
3. Fouled spark plugs.
4. Engine flooded as a result of overuse of the enricher.
5. Vacuum hose to the fuel supply valve/petcock disconnected, broken, cracked, or pinched.
6. Fuel valve/petcock or filter clogged.
7. Fuel line to carburetor or throttle body pinched or kinked.
8. Carburetor float stuck.
9. Fuel injectors clogged.
10. Severely discharged or damaged battery, you need 12.5 volts or better and be able to pass a load test if necessary.
11. Check battery terminals for damage or corrosion, check the battery cables at "BOTH" ends for loose, corroded, or broken connectors, "INSIDE" and outside the cable harness, perform connector wiggle test and check cables with an ohmmeter if necessary.
12. Loose or corroded wire connection at the coil, battery or plug between ignition sensor and CDI box.
Spark plug cables in bad condition and shorting check for leakage in the dark, cable connections loose, or connected to the wrong cylinders.
13. Ignition timing incorrect due to a faulty MAP, CKP, O2, TPS, sensors.
14. Faulty neutral, clutch lever, or kickstand safety switch.
15. Faulty fuel pump or fuse or relay.
16. Faulty CDI box.
17. A stuck bent or burnt valve.
18. Tip over sensor needs a reset.
19. Check for engine trouble codes.
For more information about your issue and valuable "FREE" downloads that you will need please click on the links below. Good luck and have a nice day.
good farm bike
AG200 Central everything about the Yamaha AG200 motorcycle
https://app.box.com/s/udl8cy7wtauah94q1nn66z9hciy7f9ub
OEM parts for Yamaha
http://mybikemanuals.com/yamaha/yamaha-ag-owners-manuals

Aug 23, 2013 | 2007 Yamaha AG 200 E

1 Answer

2007 Yamaha AG 200 E clutch adjustment


Hi, Phillip for this scenario you will need your service/owners manual if you can't find the first and best tool you ever bought for your Yamaha, despair not, for a mere zero $ you can download another one. For more information about your issue and valuable "FREE" downloads that you will need please click on the links below. Good luck and have a nice day.
2007 Yamaha AG 200 clutch adjustment Google Search
AG200 Central everything about the Yamaha AG200 motorcycle
https://app.box.com/s/udl8cy7wtauah94q1nn66z9hciy7f9ub
OEM parts for Yamaha
http://mybikemanuals.com/yamaha/yamaha-ag-owners-manuals

Aug 09, 2013 | 2007 Yamaha AG 200 E

1 Answer

What is the tyre pressure for yamaha ag 200


Hi, Anonymous for this scenario you will need your service/owners manual if you can't find the first and best tool you ever bought for your Yamaha, despair not, for a mere zero $0 you can download another one. For more information about your issue and valuable "FREE" downloads that you will need please click on the links below. Good luck and have a nice day.
AG200 Central everything about the Yamaha AG200 motorcycle
Yamaha Motorcycle Tire Pressure
https://app.box.com/s/udl8cy7wtauah94q1nn66z9hciy7f9ub
OEM parts for Yamaha
http://mybikemanuals.com/yamaha/yamaha-ag-owners-manuals

Oct 23, 2012 | 2007 Yamaha AG 200 E

1 Answer

Can not start a yamaha AG200 with kickstart


Hi, Adam and the usual suspects are:
1. Fuel tank empty.
2. The fuel tank has old dead gas.
3. Fuel tank bottom contaminated with ethanol sludge, dirt, water, rust, etc.
4. Fuel supply valve/petcock turned off.
5. Fouled spark plugs.
6. Engine flooded as a result of overuse of the enrichner.
7. Vacuum hose to the fuel supply valve/petcock disconnected, broken, cracked, or pinched.
8. Fuel valve/petcock or filter clogged.
9. Fuel line to carburetor or throttle body pinched, kinked or blocked.
10. Carburetor float stuck.
11. Fuel injectors clogged.
12. A severely discharged or damaged battery, you need 12.5 volts or better and be able to pass a load test if necessary.
13. Check battery terminals for damage or corrosion, check the battery cables at "BOTH" ends for loose, corroded, or broken connectors, "INSIDE" and outside the cable harness, perform connector wiggle test and check cables with an ohmmeter if necessary.
14. Loose or corroded wire connection at the coil or plug between ignition sensor and ECM module.
15. Spark plug cables in bad condition and shorting check for spark leakage in the dark, cable connections loose, or connected to the wrong cylinders.
16. Ignition timing incorrect due to a faulty ignition coil, ignition module or MAP, CMP, CKP, O2, TPS, ETP, IAC sensors.
17. Faulty neutral, clutch lever, or kickstand safety switch.
18. Faulty fuel pump or fuse or relay.
19. A stuck bent or burnt valve.
20. Tilt sensor needs a reset.
21. Security system not disarming alarm needs a reset.
22. Check for engine trouble codes.
For more information about your issue and valuable "FREE" downloads that you will need please click on the blue links below. Good luck and have a wonderful day.
Yamaha TW200 Trailway Discussion Forum
AG200 Central everything about the Yamaha AG200 motorcycle
https://app.box.com/s/udl8cy7wtauah94q1nn66z9hciy7f9ub
OEM parts for Yamaha
http://mybikemanuals.com/yamaha/yamaha-ag-owners-manuals

Dec 19, 2011 | Yamaha Motorcycles

1 Answer

Ag 200 yamaha riding made ugly noise then stopped engine still has good conpression but wont start any ideas


Hi, Fianolach I would love to help you with your engine or chassis noise but I just loaned my brand new pair of listening ears to your local dealer's chief technician so he could take your bike for a test ride and give you his professional opinion and estimate about your noise and repair cost. If you are a little short on "DRACHMA" and a Dealership is not on your list of fun places to visit then perhaps the list below will help soothe your worried mind so you can make an informed decision.
1. Bearings---SCREECH
2. Belts---CHIRP
3. Brake Rotors---BUZZ
4. Chains---RATTLE
5. Clutches---CHATTER
6. Cylinders---PING
7. Fronk Forks---Plunk
8. Gears---WHINE
9. Head Gasket---HISS
10. Hydraulic Lifters---TAP
11. Pistons---SLAP
12. Rear Shocks---SQUEAK
13. Shifting Trans---CLUNK
14. Solid Lifters---TICK
15. Starters---CLICK
16. Connecting Rods Go---KNOCK-KNOCK---who's there, it's me "*****"
For more information about your issue and valuable "FREE" downloads that you will need please click on the blue links below. Good luck and have a wonderful day.
very loud tapping
How to diagnose problem by the noises your bike makes
https://app.box.com/s/udl8cy7wtauah94q1nn66z9hciy7f9ub
OEM parts for Yamaha
https://app.box.com/s/tv2c4g7sbksk3zw2drleixmcs4htjyoc
AG200 Central everything about the Yamaha AG200 motorcycle

Sep 09, 2011 | 2007 Yamaha AG 200 E

1 Answer

My Ag200 has a intermittent spark? Any ideas?


Hi, Willie_tuna and the usual suspects are:
1. Fouled spark plugs.
2. Discharged battery, needs to be 12.5 volts or more and be able to pass a proper "LOAD" test, your battery may show 12.5 volts or more but has little or zero amps causing the battery to be faulty and must be replaced, AGM batteries fail in this category more so than lead acid batteries.
3. Check battery terminals for damage or corrosion, check the battery cables at "BOTH" ends for loose, corroded, or broken connectors, "INSIDE" and outside the cable harness, perform connector wiggle test and check cables with an ohmmeter if necessary.
4. Loose connection at ignition coil or plug between ignition sensor and module.
5. Spark plug cables in bad condition, shorting/leaking, spark plug cable connections loose check for spark leakage in the dark.
6. Faulty ignition coil or electronic control module.
7. Faulty CKP, CMP, or BAS sensor.
8. Faulty ignition switch.
9. Tilt sensor needs a reset.
10. Security alarm failing to disarm needs reset
For more information about your issue and valuable "FREE" downloads that you will need please click on the blue links below. Good luck and have a wonderful day.
Help with weak intermittent spark ATVConnection com ATV Enthusiast...
AG200 Central everything about the Yamaha AG200 motorcycle
https://app.box.com/s/udl8cy7wtauah94q1nn66z9hciy7f9ub
OEM parts for Yamaha
https://app.box.com/s/dz2vkvm2w52qqmumf5m8yxe7h58xr8vf

Sep 07, 2011 | Yamaha Motorcycles

1 Answer

2003 Yamaha Ag 200 clutch slipping


Hi, Anonymous and the usual suspects are:
1. Clutch controls improperly adjusted.
2. Insufficient clutch spring tension.
3. Friction discs or steel discs are worn or warped
For more information about your issue and valuable "FREE" downloads that you will need please click on the links below. Good luck and have a nice day.
AG200 Central everything about the Yamaha AG200 motorcycle
Clutch Service Don Slip Cyclepedia
DOWNLOAD Yamaha AG200 AG 200 Service Repair Workshop Manual Download...
OEM parts for Yamaha
http://mybikemanuals.com/yamaha/yamaha-ag-owners-manuals

Jun 02, 2011 | 2007 Yamaha AG 200 E

1 Answer

Yamaha yz80 2 stroke or a4 stroke


2001 Yamaha YZ80 Specifications Engine Engine Type
2-stroke Displacement
83 cc Bore x Stroke
47 mm x 47 mm Compression Ratio
8.2:1 Engine Cooling
Liquid Carburetion Carburetor
26mm Mikuni Transmission Transmission
6 - speed Chassis Wheelbase
49.5 in Ground Clearance
13.7 in Seat Height
33.6 in Fuel Tank Capacity
1.3 gallons Forks Forks
33mm Kayaba Fork Travel
10.8 in Shock Shock(s)
Kayaba Shock Travel
11.1 in Wheels and Tires Front Wheel
17 in Rear Wheel
14 in Brakes
disk/disk Other Information Intended Use
Motocross Color Scheme
Blue Cost when new
$3199

Jul 19, 2010 | 2003 Yamaha YZ 250 F

Not finding what you are looking for?
2007 Yamaha AG 200 E Logo

368 people viewed this question

Ask a Question

Usually answered in minutes!

Top Yamaha Experts

dhnguyen

Level 2 Expert

281 Answers

Steve Sweetleaf
Steve Sweetleaf

Level 3 Expert

1144 Answers

Tony

Level 3 Expert

2600 Answers

Are you a Yamaha Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...