Question about 1993 Honda CBR 600 F(2)P

Open Question

Camshaft torque specs for 1993 honda cbr600 f2

What do i torque the bolts that hold the camshaft in place?

Posted by Anonymous on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 3567 Answers

SOURCE: torque specs for cam on 2006 honda crf250r

Rock the caps around to make sure the bearing locating clips are lined up. Torque the bearing caps to 12 foot-pounds. At this point you must check the valve clearances again. If any are off, the cam must be removed and the correct shims installed.

Please rate this solution. Thanks!

Posted on Apr 07, 2009

nikey027
  • 30 Answers

SOURCE: i have a 2006 honda crf150 i am rebuilding. I just

see clymer manual (£20 from ebay) will be your Bible whildt you have this bike!!! highly recomendable

Posted on Aug 08, 2009

ollie reece
  • 1167 Answers

SOURCE: Need torque specs for the triple tree bolts

20 nm on all of them this may not seem alot but the clamps bend over the forks and clamp onto them many thanks buddy

Posted on Sep 13, 2009

DoubleClutch
  • 376 Answers

SOURCE: i need a 1993 honda cbr600 f2 timing

Try this site.
http://www.repairmanualclub.com/motomanuals/

Posted on Sep 29, 2009

  • 653 Answers

SOURCE: I need 84' Honda xr500 head bolt torque specs.

2.0 - 2.4 kgf m for 6 mm bolt
8 mm bolt 2.6 - 3.0 kgf m

Posted on Mar 24, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What is the torque specs for head bolts on a CBR 900 RR


Hi, Anonymous for this scenario you will need your service/owners manual if you can't find the best tool you ever bought for your Honda, despair not, for a mere zero $0 you can download another one. For more information about your issue and valuable "FREE" downloads that you will need please click on the blue links below. Good luck and have a wonderful day.
Head bolt torque specs CBR Forum Enthusiast forums for Honda CBR Owners
http://www.fireblades.org/forums/honda-fireblade/5000-98-900-torque-specs.html
Honda CBR900RR Service Manual
http://www.partsfish.com/page/oem-parts-for-honda
Honda CBR900RR Fire Blade Owner Manual

Mar 02, 2013 | 1993 Honda CBR 900 RR Fireblade

1 Answer

I need to know the torque-specs on the bolts for the CV shaft on a 1993 90 s. I need both the specs for the 6 bolts that hold the cv shaft to the transmission, as well as the 1 big outer-spindle...


Axle shaft bolt should be torqued to 147 Ft Lbs plus 1/4 turn.

The six CV joint bolts should be 59 Ft Lbs.

Ball joint nut should be 48 Ft Lbs

Hope this helps.

Sep 08, 2011 | 1993 Audi 90

1 Answer

Torque specs for head bolts on a 99 3.0 honda accord


Hello joee105,

The head bolt torque is a three step procedure:

1. 29 ft. lbs.
2. 51 ft. lbs.
3. 78 ft. lbs.

See image below for torque sequence.

netvan_192.png

I hope this helps.

Regards,

Jerry

Aug 21, 2011 | 1993 Honda Accord

1 Answer

2002 Honda CRF 450 R camshaft cap bolt torque spec


Hi, Anonymous for this scenario you will need your service/owners manual if you can't find the best tool you ever bought for your Honda, despair not, for a mere zero $0 you can download another one. For more information about your issue and valuable "FREE" downloads that you will need please click on the blue links below. Good luck and have a wonderful day.
Adjust Valves on CRF450R
Torque spec cam tower bolts valve cover bolts cam sprocket bolts
Honda CRF450X 2005 Service Manual
http://www.partsfish.com/page/oem-parts-for-honda
Honda CRF450R Owner Manual

Dec 12, 2010 | 2002 Honda CRF 450 R

2 Answers

Torque for 1995 honda accord camshaft bolts on a 2.2, 4 cylinder engine


camshaft sprocket bolt torque is 27 ft lbs. the camshaft bearing bolts torque is 9 ft lbs.tighten each bearing cap gradually to prevent binding.your rocker arm bolts torque 6mm bolts to 9 ft lbs and the 8mm bolts to 16 ft lbs.

Nov 23, 2009 | 1995 Honda Accord

1 Answer

Head bolt torque specs for 200 honda accord 3.0


its a three step process 1st 29ft/lbs 2nd 51ft/lbs 3rd 72.3ft/lbs

Oct 08, 2009 | 1993 Honda Accord

1 Answer

Hello. Could you please advise me what the camshaft torque tightening specs are for a 1993 SEAT IBIZA . Thank you


CAM SHAFT BEARING CAPS 15 FT LBS. DRIVE SPROCKET BOLT 58 FT LBS. CAMSHAFT END PLAY IS 0.006 in. WARNING THIS IS THE 2.8L ENGINE WHEN TORQUEING CAM SHAFT BEARING CAPS YOU HAVE TO TIGHTEN THE BOLTS 2 TURNS AT A TIME IN A DIAGONAL PATTERN TO DRAW THE CAMSHAFT DOWN AGAINST THE VALVE SPRING.

Sep 29, 2009 | 2002 Volkswagen Golf

1 Answer

Alternator r+r


Look on this site http://cbrworld.net/forums/default.aspx
there's loads of tutorials on all things cbr600.

Dec 31, 2008 | 1993 Honda CBR 600 F(2)P

Not finding what you are looking for?
1993 Honda CBR 600 F(2)P Logo

Related Topics:

83 people viewed this question

Ask a Question

Usually answered in minutes!

Top Honda Experts

Arnie Burke
Arnie Burke

Level 3 Expert

4514 Answers

yadayada
yadayada

Level 3 Expert

74896 Answers

Gino Cussen
Gino Cussen

Level 2 Expert

216 Answers

Are you a Honda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...