Question about 2008 kawasaki Ninja 250R

1 Answer

2002 kawasaki ninja 250 motor on ATV need wiring help

Dont have handlebars off ninja bike need wire diagram and help bypassing safety switchs,want to know how many volts are going to both wires on coil

Posted by on

  • Anonymous Mar 18, 2014

    The name on the bike is "eliminator" and 400cc.But i can not find it on the list of bikes. Circa 1989 - 1994

  • Anonymous Mar 28, 2014

    its actually a 250 from 1993 but that wasnt an option

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Brigadier General:

    An expert that has over 10,000 points.

  • Master
  • 6,966 Answers

Hi and welcome to FixYa,

To my knowledge, there would only be 3 wires needed from the handlebars that affects the engine:

  • engine RUN/OFF;
  • clutch ENGAGED;
  • engine START.
The first 2 would go to the interlock plus the neutral wire and the sidestand wire. The interlock then sends signals that starter motor can turn and that CDI can fire.

As to the ignition coil, 1 wire is IGN B+12 while the other would go to the CDI and should pulsate when cranking or engine running.

Good luck and thank you for using FixYa.

Posted on Feb 01, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Need to find out how to put wiring on


Kawasaki Motorcycle Wiring Diagrams

www.classiccycles.org/1852/597943.html
Kawasaki BN125 Eliminator 125 Electrical Wiring Harness Diagram Schematic HERE... Kawasaki GPX600 Ninja GPX 600 Electrical Wiring Harness Diagram ...Missing: tpgs

Kawasaki Motorcycle Service Manuals

www.classiccycles.org/1852/1894.html
Kawasaki BN125 Eliminator BN 125 Workshop Service Repair Manual HERE ...Kawasaki GPX600 Ninja 600 Electrical Wiring Diagram Schematic 1988 to 1991 ...Missing: tpgs

WIRING DIAGRAM thread for all sorts of bikes - Bike Chat Forums

www.bikechatforums.com/viewtopic.php?p=2322761

Oct 11, 2009 - 25 posts - ‎7 authors
this is the new wiring diagram thread, requests allowed .... http://i574.photobucket.com/albums/ss182/hmmmnz1/Honda/th_cb600f.jpgCB600f ...Missing: tpgs

Jan 27, 2016 | Motorcycles

1 Answer

I have an 05 Kawasaki Ninja 250 which got stolen. My ignition switch was broken all up . I need to move my bike but can't start it. How do I bypass the ignition switch start my bike


Hi Thomas:
My sympathies re your bike getting stolen.
There will undoubtedly be a way to bypass the ignition but you must appreciate that anyone posting that information would really be contributing to the potential theft of a lot more bikes.
Also, since the amount of damage is unknown, doing any hot wiring could lead to more problems.
If you had insurance, the cost of moving the bike should be covered.
If you didn't, I'd recommend getting some buddies with a pickup truck, some straps, and the promise of beer and pizza when the bike gets into your shop.
Best of luck.

Jan 18, 2016 | Motorcycles

1 Answer

Cant get atv to continue running


i would suspect a safety switch issue but a good wiring diagram and a test light will help you out here...

Dec 27, 2013 | kawasaki 2005 Bayou 250

1 Answer

Kawasaki ninja zx7 wiring diagram


When you say it keeps doing the same thing do you mean the wires keep burning, sounds as though you need to be finding a new wiring loom am sorry, if you carry on riding the bike you will eventually cook all of your expensive charging/and ignition components rendering the bike as scrap

May 20, 2013 | Motorcycles

1 Answer

1980 z250c bike turns over no spark


Possibilities are; handlebar kill switch is grounding out, kick stand kill switch is broken or needs adjusting, a bad spark plug, power wire to ignition has come unplugged, bad ignition switch, ignition system needs service, coil or coil wire has gone bad. This list is in sequence of likelihood.

Mar 14, 2011 | 1981 kawasaki Z 250 C

1 Answer

I just installed a new light switch box on my 2003 kawasaki ninja 250r and now my blinkers work wen i turn my key on but i have no power to the ignition or the headlight. There are 2 female connectors...


The wires from the switch should be color coded. The same is true of the wires for the signals, headlight and switch. Just hook up the like colored wires

Aug 27, 2010 | kawasaki Ninja 250R Motorcycles

1 Answer

Ninja 250r headlight, does bike need to be running for it to work


your lights should always work with the key in on position for safety reasons, eg if you had to pull over and it was dark you would turn the engine off but would still need lights.

Nov 10, 2009 | 2001 kawasaki ZX-6R Ninja

1 Answer

Every wire is unplugged on my kawasaki ninja X7


May I suggest a trip to your local library. Cycle repair books should be in 646 stacks of reference. Otherwise, go to your Kaw dealer and pay their price for one that covers your bike. You'll still pay less than if you paid them to rewire it...and you'll learn something.

Oct 06, 2009 | 2008 kawasaki Ninja 250R

1 Answer

My 2005 ninja won't start


If it was flooded it should resolve itself after a short amount of time stood, left alone. Have u checked the spark plugs etc are still connected properly. Maybe you knocked the engine cut of switch when you dropped it, should be a red switch on the throttle side of the handlebars.

Apr 12, 2009 | kawasaki Ninja 250R Motorcycles

1 Answer

My VN1500 (1993) sometimes doesn't start


you have either a bad connection going to one of the switches on the handlebar controls or a broken wire going to the controls. check these wires really carefully/

Jan 23, 2009 | 2004 kawasaki VN 1500 Vulcan Classic

Not finding what you are looking for?
2008 kawasaki Ninja 250R Logo

636 people viewed this question

Ask a Question

Usually answered in minutes!

Top kawasaki Experts

Arnie Burke
Arnie Burke

Level 3 Expert

4514 Answers

yadayada
yadayada

Level 3 Expert

69014 Answers

chris

Level 2 Expert

232 Answers

Are you a kawasaki Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...