Question about 1982 Suzuki GS 650 GT

Open Question

Gs650 cam chain tensioner adjustment - 1982 Suzuki GS 650 GT

Posted by Anonymous on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 1 Answer

SOURCE: I just checked my valve clearence and adjusted my

I put my piston to toop dead center and readjusted my cam chain and it seems to be running fine. The only thing I had to do was to turn the idle up a notch which still kind of gets me....but it's better now.

Posted on May 06, 2009

  • 221 Answers

SOURCE: GS 650 cam chain rattle

do you have manual or auto. cam tensioner sounds like the problem

Posted on Dec 05, 2009

heimlich
  • 1978 Answers

SOURCE: How do you properly adjust

This is a trick question. You are fortunate to have an automatic cam chain tensioner on your motorcycle. No maintenance id=s necessary. If you are experiencing a loud ticking sound coming from your cylinder/head, you probably just need to do a valve adjustment. IN .08 mm (.003 in) EX .13 mm (.005 in)

Posted on Sep 11, 2010

Testimonial: "Thanks, I knew it had a tensioner but did not know it was automatic, I was going to adjust it as routine maintenance. Thanks very much for your reply."

  • 279 Answers

SOURCE: clicking or loudingd ticking noise

I think I would start with the valves.It sounds like they need to be adjusted to eliminate the play on a cold atart up.A worn chain tensioner doesn't care if its hot or cold.Do an oil change on the bike as well,the valves might be hanging up a bit.happy riding

Posted on Nov 05, 2010

sisadsl
  • 1508 Answers

SOURCE: Hi. Suzuki rf600r 1993.

a 93 model is likely to need a chain and tensioner, if you undo the tensioner mounting bolts it should spring out 10-15mm

Posted on Mar 16, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Cam chain adjustment


cam chain tension will not cause your problem. A miss at revs is electrical (coil -points-ht leads-plugs etc) and possible air/ fuel ratio problem --leaning out at revs from jet size setting

Jun 23, 2013 | Office Equipment & Supplies

1 Answer

How to adjust timing chain tensioner bajaj ct 100?


Hi, Arun the CT100 has an automatic hydraulic adjuster for the cam chain for more information about your question and valuable free downloads that you will need please visit the websites below. Good luck and have a nice day.
Cam Chain Adjustment
How to adjust Timing Timing Chain Tension and Valves
http://www.marutibajaj.com/pdf/ct100
http://www.carlsalter.com/pdfs/Bajaj__Chain%20Tensioner%20Assembly%20Tech%20Note.pdf
http://www.hondampe.com.au/docs/owning_a_honda/owners_manuals/motorcycles/CT110-2005.pdf

Sep 01, 2012 | Motorcycles

1 Answer

Xr 350 timing chain slop makes noise can i adjust it


Both the 1985 honda xr250r and xr350 look loke they have self adjusting cam chain tensioners. You may have a broken tensioner or tensioner guide. With the age of the bike you may need a new cam chain. There is nothing to adjust so you need to just figure out if the chain is stretched , if a guide is broken, or if the tensioning mechanism is malfunctioning.

Oct 01, 2010 | 1985 Honda XR 250 R

1 Answer

When warm i notice a cam chain type noise. could this be a worn cam chain tensioner . the bike has covered 36000 miles


it can either be a worn tensioner or need for a valve adjustment. if you rev the engine and noise goes away, you need a new cam chain tensioner. if the noise remains or gets worse when you rev it up, you need a valve adjustment and should replac the tensioner anyway. 36,000 miles on the motor is definitely mileage for an adjustment if it's never had one.

Jun 09, 2010 | 1999 Honda CBR 1100 XX Super blackbird

1 Answer

Vt500 c ticking sound. Cam chain tensioners pretty sure its the cam chain tensioner springs. lost their spring If its been making this noise for a while what else would i need to replace. cam...


You have a self adjusting cam chain tensioner. It is sold as an assembly. Take out the complete unit and replace it with a new one. The springs are not bad , the device that keeps the pressure on the tensioner is slipping causing a ticking sound.

May 16, 2010 | 1985 Honda VT 500 C Shadow

1 Answer

Can i adjust cam chain tensioner in kawasaki EN 500 1992, if not is it possible to fit manual cam chain tensioner.


no, it is automatic adjustment only, once it has reached it's end, you must replace the chain

May 04, 2010 | 1996 kawasaki EN 500 Vulcan Classic

1 Answer

GS 650 cam chain rattle


do you have manual or auto. cam tensioner sounds like the problem

Nov 15, 2009 | 1982 Suzuki GS 650 G Katana

2 Answers

How to adjust automatic timing chain on z650


To adjust the cam chain tensioner: disconnect the negative lead to the battery, remove the ignition cover plate on the right side of the engine, using the 17MM bolt rotate the engine CLOCKWISE 2 full revolutions, continue turning it until the corner of the timing advancer near the #2 ans #3 "T" mark aligns with the timing mark on the crankcase, ( as seen through the hole),loosen the locknut and bolt on the cam chain tensioner, the tensioner will automatically adjust the tension of the chain, tighten the adjuster bolt to 5-6.5 ft.lbs., tighten the locknut, replace the ignition cover and re-connect the battery.

Oct 23, 2009 | 1978 kawasaki Z 650

1 Answer

Timming chain adjustment


Most likely you have anautomatic cam chain tensioner, which cannot be tensioned, and the only remedy is to replace the cam chain (if it's stretched). If, however, you have a manualy adjusted cam chain tensioner (highly unlikely), you have to look up the tensioning value in your workshop manual.

Jun 13, 2009 | 1986 Yamaha FZ 600

3 Answers

ZX6 Noisy Cam Chain


if your chain is makeing nois it would be a good idear to replace the chain a manual cam chain tenshioner will take the slack up but what about the valve timeing a worn chain will throw it out due to the chain stretching plus the manual tenshioner will make the guides wear faster if ya auto matic tenshioner has reached its limit that means replace chain no ifs or buts

May 08, 2009 | kawasaki ZZR 600 Motorcycles

Not finding what you are looking for?
1982 Suzuki GS 650 GT Logo

Related Topics:

169 people viewed this question

Ask a Question

Usually answered in minutes!

Top Suzuki Experts

yadayada
yadayada

Level 3 Expert

75797 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

4514 Answers

Ed Nelson
Ed Nelson

Level 2 Expert

149 Answers

Are you a Suzuki Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...