Question about 1993 Harley Davidson FLSTF Fat boy

1 Answer

H-D clutch pushrod and bearings

SORRY if i posted this as a '93 Fat Boy but thats as close as I could get.I have a 1987 FXST/C softail with a 5 speed gearbox and need to order the clutch pushrods and throwout bearing. If anyone could get me the part numbers I would appreciate it. All sites including the dealerships tell you to order by part numbers but...... where do you get them from? They're not in the Owners Manual or in the Workshop Manual (my Workshop Manual doesn't even have the correct picture of the gearbox!!!) Thanks to anyone that can help.

Posted by on

  • almiosito Apr 17, 2009

    I'm in Italy and was trying to order the parts on the internet since buying them here from the local dealer costs about tree times the stateside price. But in the end I wound up ordering the parts at the local dealer. Case resolved.

  • Mel Jacobson
    Mel Jacobson May 11, 2010

    Is there a dealer you can call .....?



1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    One Above All:

    The expert with highest point at the last day of the past 12 weeks.

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.


    An expert that got 20 achievements.

  • Harley Davidson Master
  • 48,063 Answers

Hi Almiosito, for more information about your question please visit the websites below. Good luck and have nice day.

Posted on Jun 18, 2015


3 Suggested Answers

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

  • 216 Answers

SOURCE: What is the neck rake in a 2000 FXST Softail?

Its raked out at 32 degrees

Posted on Feb 19, 2009

  • 379 Answers

SOURCE: 95 Harley FXSTC Pushrod replacement

A little something to add to the above advised that there are TWO kinds of aftermarket pushrods for Harleys. Adjustable and easy install. Adjustable pushrods you have to break the cylinder heads loose to install them. The easy install type slips right in with no extra work. Make sure the ones you get can be installed without removing the cylinder heads.

Posted on Jun 26, 2009

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

2003 Fat Boy diagram of twin cam support plate

Hi, Michaelpadilla for this scenario you will need your service, parts fiche, and owners manual if you can not find the best tool you ever bought for your Harley, despair not, for a mere zero $0 you can download another one.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below and for more specific information or questions at no charge please feel free to contact me at Good luck and have a wonderful day.
2003 Fat Boy diagram of twin cam support plate Google Search
Cam Replacement on Harley Davidson Twin Cam including Pushrod Removal...
Harley Davidson Softail Workshop Service Repair Manual 2003 with... $8 extremely cheap since it also contains a "FREE" $60 Electrical Diagnostic Manual
Instant Tech Relief To speak to me personally absolutely "FREE"

Aug 16, 2017 | 2003 Harley Davidson FLSTF Fat boy

1 Answer

Oil capacity Clutch 2009 harley softail fatboy

Hi Anonymous, the primary holds 26 oz. of Harley Davidson Primary Chaincase Lubricant. Please visit website below:
UPDATED how to chang the primary fluid on harley softail
Good luck

Feb 18, 2014 | 2003 Harley Davidson FLSTF Fat boy

1 Answer

Engine specs compensator softail

Hi Anonymous, I'm sorry but I loaned my listening ears to the lead technician at your local Harley Dealer. Have a nice day.

Aug 24, 2013 | 2006 Harley Davidson FXST Softail Standard

1 Answer

How do I put a fuel pump on a softail fat boy

If you want the mechanics of it then try the HD forums. If you want pictures / video try you tube. There's a bit on there.

Jul 09, 2012 | 2007 Harley Davidson FXST Softail Standard

2 Answers

Will exhaust from 2003 harley fat boy fit a 1999 harley fat boy

I doubt it. The Fat Boy is a member of the Softail family. In 1999, the Softails were running Evolution engines. They didnt' go to the TC-88B engine until 2000 and that required a frame change. I don't think it will fit but you never really know until you try it.


Sep 07, 2010 | 2003 Harley Davidson FLSTFI Fat Boy

1 Answer

Right side where speed cable goes do i need oil its a 99 fat boy pulled plug no sigh of oil or anything

The '99 Fat Boy was equipped with the Evolution engine and five speed transmission. The TC88B engine wasn't introduced until the 2000 model in the Softail series. The speedometer cable should come from the front wheel. On the right side of the transmission, there is a plug and a cable going into it. This is the clutch cable. If you can't see any oil on the plug with the bike in the vertical position, you need to add oil. The transmission capacity is 20-24 ounces of Harley-Davidson semi-synthetic transmission lube or H-D Syn3. The drain plug is a Torx type pipe plug below the chrome cover on the right side.

Oct 14, 2009 | Harley Davidson FLSTFI Fat Boy Motorcycles

1 Answer

I need to know how to check if my pushrods are adjusted right on a 97 fxst custom with the crane cam box and cams

I would take it to someone who can help you through it personally, it is very easy to bend pushrods just rotating the motor if they are too tight. You could contact S&S cycle tech line and see if they have the new Crane contact numbers.

Aug 12, 2009 | 2000 Harley Davidson FXST Softail Standard

1 Answer

Transmission noise - 93 Honda del Sol w/ 5-spd manual trans.

Imput shaft bearing. It just happened to me. You're looking at a $400 fix.

Mar 22, 2009 | 1994 Honda Civic Del Sol

Not finding what you are looking for?
1993 Harley Davidson FLSTF Fat boy Logo

Related Topics:

257 people viewed this question

Ask a Question

Usually answered in minutes!

Top Harley Davidson Experts

Arnie Burke
Arnie Burke

Level 3 Expert

4903 Answers


Level 3 Expert

4349 Answers


Level 3 Expert

79865 Answers

Are you a Harley Davidson Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides