Question about Motorcycles

Open Question

Hi , i need a lowering kit for a Kawasaki ZZR600 1993 for my girlfreind

The standard lincage is 7" between holes and i need to increase the length to drop the bike by 2" in height

Posted by on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 2336 Answers

SOURCE: Chain adjustment question

Well i dont think the ride hieght will change, nothing you could notice, and if your changing sprockets its best to do both and a new chain, now i might add that it is preffered to change chain with sprockets not required if the sprockets are ok. As to the length i can only say i run the 17 tooth around the city and for the long trips i swap back to the 18, mind you it is a new 18 not the original, of course with the change back (2nd time) i have not changed the chain and have been running the same chain length, it has shortened the wheel base from the original 18 tooth front, but i kinda like it a little shorter, gives me more weight over it and the front gives more feed back, but thats just me, not saying its right

Posted on Nov 10, 2008

  • 2336 Answers

SOURCE: Seat height

before spending money on a new sit contact the dealer and see if there is a lowering kit for it. I have just lower my wifes 2007 vulcan 500 by 2 inchs. or talk to www.scootworks.com there are really great there

Posted on Nov 10, 2008

  • 112 Answers

SOURCE: I NEED DETAILS ON LOWERING MY BIKE.

If you bought the lowering links they get installed down at the counter lever on the rear shock,also suggest you lower the frt fork tubes by makeing the tubes stick up past the triple tree 1 inch this will help with thr rake of the bike after you lower the rear and keep it from getting wobbly in the coners.

Posted on Mar 31, 2009

  • 52 Answers

SOURCE: seat height seems high according to specs ; vtx1100c2 2004

you could try a little bit smaller rear tire. cheaper than the shocks maybe

Posted on Jun 11, 2009

pugwash814
  • 377 Answers

SOURCE: Is there a way to lower the suspension? I need the

you can adjust the rear shock to a softer setting , the info should be in the owners book, or you could get a local upholster to remove some seat padding ..

Posted on Jan 16, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My Sony Trinitron kv-30XBR910 wont turn on. It sounds like it, then like it shuts itself off again. Standby light blinks 7 times, shuts off for a sec, 7 blinks.. What's this mean? Can I fix it myself?


power supply. Check capacitors on the power supply board, replace ANY that have the slightest bulge on top, should cost you less than $10 in parts, and some through hole soldering. Ebay has capacitor kits for your TV or you can just look on sides of bad ones and replace. Try and get the same thermal rating (85C or 105C) and always get same capacitance. Voltage is not a deal breaker if you get something higher, but never lower. I'm watching a $1200 Samsung TV right now I bought for $50 and $4 in replacement capacitors.

Aug 18, 2015 | Sony Televison & Video

1 Answer

What is the best jetting kit for use with after market filters on a gtr 1000 or can I just lift needles up on clips


Amazon.com: Kawasaki GTR1000 GTR 1000 A1-A2 6 ...

www.amazon.com > ... > Fuel System > Jets & Jet Kits Amazon.com, Inc.Amazon.com: Kawasaki GTR1000 GTR 1000 A1-A2 6 Sigma Custom Carburetor Carb Stage 1-7 Jet Kit: Automotive.

Jul 20, 2015 | Motorcycles

1 Answer

Increase height of pulsar 150


Hi, Anonymous here are some options for lowering your bike depending on your needs and wallet:
1. Rear shock lowering kit.
2. Front fork lowering kit.
3. Shorter rear shocks.
4. Shorter front forks.
5. Thinner padded seat.
6. Lower profile tires.
Please be aware that some of these options or a combination of options will require a shorter kickstand or your stock one modified. For more information about your issue, please visit the websites below. Good luck and have a nice day.
http://88.198.249.35/d/Pulsar-150-Workshop-Manual.pdf

May 20, 2014 | Bajaj Pulsar 150 Motorcycles

1 Answer

I am having bajaj es125 : engine RPM increases when pressing clucth while coming to lower gear & not remaining at idle tuning


Hi, Vrishali and the usual suspects are:
1. Idle speed improperly adjusted.
2. Inlet system air leak.
3. Leaking accelerator pump.
4. Loose low-speed jet.
5. Plugged low-speed jet.
6. Contaminated or plugged low-speed circuit.
7. Enrichner valve is not seated or leaking.
For more information about your issue please visit the websites below. Good luck and have nice a day.
Manual Kawasaki Bajaj Wind 125 Documents

Jan 11, 2013 | 2006 Bajaj Wind 125

1 Answer

1999 kawasaki zx6r how to lower


You can buy a lowering kit for a range of bikes, simply replacing the linkage on the lower of the suspension will reduce the rideheight by a preset determined amount check out ebay item 310343894620

Nov 05, 2011 | 1999 kawasaki ZX-6R Ninja

1 Answer

My resolution is lower than the software that i want to install in my computer..i want to know how to increase its resolution.what can u help about it


Hi, welcome to FixYa.

I assume you use netbook, right? Try this to increase resolutions on your netbook:

http://www.netbooklive.net/how-to-get-better-resolution-on-your-standard-10-inch-netbook-2772/?utm_source=feedburner&utm_medium=feed&utm_campaign=Feed:+netbooklive+(Netbooklive.net+-+all+you+need+to+know+about+netbooks)&utm_content=Google+Reader

or this (similar):

http://www.myasuseee.com/increase-your-screen-resolution-with-this-windows-7-hack/

You can also do it using this software:

http://www.edugeek.net/forums/windows/42885-netbook-screen-resolution-changer.html

http://www.edugeek.net/forums/windows/42885-netbook-screen-resolution-changer.html

Mar 11, 2011 | Computers & Internet

2 Answers

I''m doing carburetor maintenance and freeing up the intake and exhaust on my ''93 Kawasaki ZR1100-A2. The bike came with 2 #98 and 2 #100 main jets. If I install 4 #102 jets will the jet needles require...


Since the jet increase is minimal you might not need to do anything,but first I would suggest riding for a few miles at reasonably high revs(close to full throttle),kill the motor and pull in the clutch,then remove at least one of your plugs(all four would be best) to check the colour.

If burning a nice light brown then your main jets are OK ,or if darker then you may have to revert back to your old jets.If the bike is accelerating smoothly, then your needles are OK.If you are getting a flat spot you need to raise the needles or rough mid-range,lower the needles, but since you have the carbs apart, just check needles for wear and replace if ness.

If you are experiencing either of these in mid-range ,even after raising/lowering the needles you might have to fit other needles(DYNOJET perhaps)to increase or decrease the fuel as necessary.

Hope this helps, and please leave fair comment if it does

Thank you

Sep 16, 2009 | 1993 kawasaki Zephyr 1100

1 Answer

I NEED DETAILS ON LOWERING MY BIKE.


If you bought the lowering links they get installed down at the counter lever on the rear shock,also suggest you lower the frt fork tubes by makeing the tubes stick up past the triple tree 1 inch this will help with thr rake of the bike after you lower the rear and keep it from getting wobbly in the coners.

Mar 31, 2009 | 2008 kawasaki ZX-10R

1 Answer

Seat height


before spending money on a new sit contact the dealer and see if there is a lowering kit for it. I have just lower my wifes 2007 vulcan 500 by 2 inchs. or talk to www.scootworks.com there are really great there

Nov 10, 2008 | 2008 kawasaki Versys

Not finding what you are looking for?
Motorcycles Logo

Related Topics:

34 people viewed this question

Ask a Question

Usually answered in minutes!

Top Motorcycles Experts

Arnie Burke
Arnie Burke

Level 3 Expert

4514 Answers

yadayada
yadayada

Level 3 Expert

75797 Answers

kakima

Level 3 Expert

102366 Answers

Are you a Motorcycle Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...