Question about 2003 Harley Davidson FXSTDI Softail Deuce
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
If you are gonna work on your own Harley, shell out the $60.00 for an H-D manual. They have a basic wiring diagram inside.
Posted on Jan 19, 2009
I have one for an '84 model. About the only difference is the 84 model had an alternator instead of a generator. Other than that, it's about the same. contact me at firstname.lastname@example.org. I'll try to scan a copy from my service manual and shoot it to you.
Posted on Nov 17, 2009
The fork oil is a very specific job needing a manual and a special tool, I don't want to insult anyones mechanical knowledge but if you have never done it before, best to take somewhere else. Engine oil on the other hand is easy, the drain tube to any softail is on the right side by where the frame meets the swing arm, has somekind of plug in it. Start and run bike for a little while, long enough to get it warm but not hot. Remove fill plug and then remove plug in drain line. Using a peice of cardboard or something put in between filter and frame , directing the oil to your drain pan instead of where ever it goes. Put 1 qt oil back in (after everything is reinstalled) start the bike and make sure the oil light goes out, when it does shut bike off and fill to the point that when it is standing upright you get a little oil on the tip of your finger, over filling may result in loss of oil cap from pressure (been there)
Posted on Feb 16, 2010
I can help you with the wiring diagram but it will be the complete diagram. I have never seen just a turn signal only type wiring diagram. But, there's nothing to a '74 model Ironhead turn signal system.
All the wires for the system were gray but had these little "colored rubber bands" on the ends of the wires near the signal lights. The violet bands were for the left side and the brown bands were for the right side turn signals
Now, I cannot send the wiring diagram through this forum as it will not allow for an attachment. If you will contact me directly, I'll send you a wiring diagram as a jpeg attachment via e-mail. My address is email@example.com.
Posted on Aug 22, 2010
Tips for a great answer:
Jun 15, 2016 | Electrical Supplies
Feb 16, 2013 | 1993 Harley Davidson FLSTF Fat boy
Feb 06, 2012 | Harley Davidson FLSTC Heritage Softail...
Oct 28, 2010 | 2005 Harley Davidson FLSTF - FLSTFI Fat...
Apr 25, 2010 | 1993 Harley Davidson FLSTF Fat boy
100 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: