Question about 2004 Honda STX 1300 Pan European

1 Answer

Battery removal needing to know how to pull the seat off to get the battery out to get it charged. Write me back at: paramotoman@gmail.com Thanks Ramon

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

Unlock the left hand seat lock, lift up the lock, inside is a small lever, depress this and seat will come off. To access the battery after seat removal there are three (3) pan head bolts holding on the side panel remove these carefully and this will allow full acces to the battery.

Posted on Mar 29, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a 1998 Honda Valkyrie. I need to charge the battery but cannot get to it. I know the seat has to be removed, but I don't know how to remove it! Can you help?


Look under the seat between the fuel tank and seat area. Or follow the side cover around under the tank where the two side covers would meet.There is a Key Hole like on a car door you need your key to turn the lock and pull up on the front of the seat. The battery is under the seat under a plastic cover held down with a rubber strap.

Jun 07, 2011 | 1998 Honda F6 C Valkyrie

3 Answers

How do i take the back off on a 1999 nissan maxima bucket seat


Hi, follow the instruction below......
Rear
See Figures 3, 4, 5 and 6
  1. Remove the lower seat cushion by pulling straight up on the front portion and disengaging the clips. Then hinge the seat upward to release the rear clips.
03b6e0a.jpg

Fig. 3: Pull up on the front of the lower seat cushion and disengage the clips
  1. Remove upper rear seat back-to-chassis bolts.
77eb191.jpg

Fig. 4: Remove the bolts behind the center armrest ...

a796228.jpg

Fig. 5: ... and the bolts on the lower corners ...

fbf100a.jpg

Fig. 6: ... Then pull up on the seat to disengage the three clips on the top of the seat
  1. Remove rear seat back by tilting forward and pulling straight up.

To install:
  1. Install the lower seat cushion and torque the lower rear seat-to-chassis bolts to 15-20 ft. lbs. (21-26 Nm).
  2. Install the upper rear seat back cushion and torque the upper rear seat back-to-chassis bolts to 15-20 ft. lbs. (21-26 Nm)

Jan 19, 2011 | 1999 Nissan Maxima

1 Answer

On a 2004 Honda Shadow 750. Can you tell me the steps to removing the seat so I can charge the battery please.


Yes, Towards the back of the front seat and on the side are two big bolts.
I beleive they are allen head bolts. Remove the two bolts and the seat slides out.
If you have a rear seat, pull up on the front of the rear seat so the front will slide back.

Now you see electrical wires and a cdi sitting in a plastic holder. That plastic holder is the battery cover.
Don't unplugg anything, just pull the cdi out of the plastic holder so you can remove the cover.
There will be one screw holding that cover down. remove the screw and lift out the cover.

There is your battery for you to change out, charge, or check.

Dec 12, 2010 | Honda VT 750 C2 Shadow Motorcycles

2 Answers

How do you open the seat on a honda shadow ace vt750cd


If it has the original seat, there is nothing to open. You remove the seat. First, remove the passenger seat by removing the bolt behind it that secures it to the fender, then lift the back of the seat, and push it forward until the front bracket is disengaged from the front bolt (if you lift the back and look closely, you will see a keyhole slot in the bracket that engages the top of the front bolt). This front bolt secures the back of the rider seat; remove it, and you can lift the seat from the back, pull, and it is free of the motorcycle. My ACE 750 is a 2002 model, and I think they are all the same.

Jun 19, 2010 | 2002 Honda VT 750 CD Shadow A.C.E. Deluxe

1 Answer

How do I charge the battery on a 2002 HD Fatboy. I know it is under the seat but I'm not sure how to remove the seat.


The seat should have a tab on back with one bolt. Remove bolt pull back to release front of seat from tab.Before you do check for wiring that pulls out from under seat on left? side that is hook-up for Harley brand trickle charger.Some models have that,so?Good luck.

Mar 07, 2010 | 2002 Harley Davidson FLSTF - FLSTFI Fat...

1 Answer

How do i remove the seat on a honda 954 rr 2002?


I think on this model you just pull up on the back corners of the riders seat to expose 2 retaining bolts. Remove the bolts then pull the seat up and back to remove it.

Dec 27, 2009 | 2002 Honda CBR 954 RR Fireblade

2 Answers

Need to remove battery so I can charge it on a 2008 Kawasaki Ninj


The black panels on each side of the seat come off, then the blots that hold the seat.

Sep 25, 2009 | 2008 kawasaki Ninja 250R

1 Answer

How do you remove the gas tank from the tw200 2003. I have got the bolts that held it closer to the back but i cant figure out how to undue the front.


There are two seat bolts under the seat that must be removed. Obviously, if the underside of the fender is covered in mud, you'll have to clean it first. A metric socket works best to remove the bolts.

After removal of the seat bolts, lift the back of the seat, then pull straight back; a plastic flange on the front of the seat hooks under the tank, and so you have to pull it backwards to remove it.

With the seat off, removing the battery is pretty easy. A rubber strap holds the battery down; unhook and remove it. Unscrew the lead wires and unhook them (negative first), then pull the battery out.

Install a replacement battery by reversing these steps. Yamaha recommends charging a new battery before installing it.

-solomoia

Jul 07, 2009 | 2001 Yamaha TW 200

2 Answers

Remove seat and battery Yamaha tw-200


There are two seat bolts under the seat that must be removed. Obviously, if the underside of the fender is covered in mud, you'll have to clean it first. A metric socket works best to remove the bolts.

After removal of the seat bolts, lift the back of the seat, then pull straight back; a plastic flange on the front of the seat hooks under the tank, and so you have to pull it backwards to remove it.

With the seat off, removing the battery is pretty easy. A rubber strap holds the battery down; unhook and remove it. Unscrew the lead wires and unhook them (negative first), then pull the battery out.

Install a replacement battery by reversing these steps. Yamaha recommends charging a new battery before installing it.

Mar 17, 2009 | 2001 Yamaha TW 200

8 Answers

Removing and reinstalling the LCD screen for Philips GoGear HDD6330???


I am puting together a write-up (with photos) on how to replace screen but its going to take a couple of days so keep looking

Jun 14, 2008 | Philips GoGear HDD6330 MP3 Player

Not finding what you are looking for?
2004 Honda STX 1300 Pan European Logo

Related Topics:

235 people viewed this question

Ask a Question

Usually answered in minutes!

Top Honda Experts

Arnie Burke
Arnie Burke

Level 3 Expert

4514 Answers

yadayada
yadayada

Level 3 Expert

69199 Answers

Gino Cussen
Gino Cussen

Level 2 Expert

216 Answers

Are you a Honda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...