Question about 2007 Harley Davidson FXDB Dyna Street Bob
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
These bikes were designed to operate on REG. fuel. If you need a cleaner or feul additive to help use P.I. from Amsoil. If you are interested in saving money and fuel and on this product contact me and I'll show you how. email@example.com
Posted on Jul 07, 2009
You have a torn engine mount, if your bike is still under warranty get it to your dealer asap!!!!! The same thing happened to my 08 Superglide, the dealer was quick to fix it as I had no idea as to why my bike was shaking so badly. Also check that your tank mounts are tight too..
Posted on Aug 31, 2009
Not very common, but I don't see how the seal could scratch the tube. There are a few millimeters of clearance between the tube and metal part of the seal. The rubber seal rubs the tube and is bonded to the metal ring. Either the tube was scratched during assembly or the seal was BADLY dented somehow. Further, the tube is hard chromed and the seal metal is soft steel. Go figure!
Posted on Oct 10, 2009
no need to remove tank, Remove terminal pins from connector under left side of tank then pull gauge and wires out. Install new gauge, replace terminal pins in their propper place in the connector,plug it in and varify the repair.
Posted on Dec 22, 2009
try heating it with a small propane torch it should expand the metal also use a long handled wrench or a pipe wrench if you can get it on the peg
Posted on Dec 26, 2009
Tips for a great answer:
Jun 28, 2014 | 2006 Harley Davidson FXDBI Street Bob
May 12, 2012 | 2007 Harley Davidson FXDB Dyna Street Bob
Oct 01, 2011 | 2006 Harley Davidson FXDBI Street Bob
Sep 14, 2010 | 2006 Harley Davidson FXDBI Street Bob
Nov 21, 2009 | 2006 Harley Davidson FXDBI Street Bob
Mar 31, 2009 | 2006 Harley Davidson FXDBI Street Bob
187 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: