Question about 2000 Harley Davidson XL 1200 C Sportster Custom
Turn on key. Dont touch anything else until security light goes out. Hold both turn signals at the same time. A screen of 00000 will appear. If you havent changed the code, they will be ones or sevens 11111 or 77777. The left signal changes the value, the right enters it.
Posted on Oct 10, 2013
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
go online and find a manual from Chiltons Manuals about thirty dollars shipped to you it will have a wiring diao. and all other info for the dyna
Posted on Sep 13, 2009
Bleed the brake system adding new fluid until the new fluid comes out in to your bleeding bottle you just changed it.
Posted on Apr 09, 2010
"The two small hydo lines entering it seem to be loose and spring loaded turn screw is also loose"
I think you're referring to the two throttle cables and the throttle lock screw on the bottom of the throttle mechanism.
The "run/stop" switch is located inside the switch housing on the throttle side. It has three wires running to it. If the switch does not work, it may be defective.
To replace the switch, you must remove the two bolt that hold the switch halves together. Carefully seperate the two halves. the "Run/Stop" switch is in the front half of the switch housing. The switch is held in by a couple of small screws. Remove the switch and unsolder the wires taking note of which wire goes where. Resolder the wires to a new switch and install the switch in the housing. Reassemble housing keeping it positioned up firmly against the front brake master cylinder. Check the throttle for proper operation prior to starting the engine.
Posted on Apr 09, 2010
The oil tank is on the bottom of the transmission. Two drain plugs. The center one is the transmission drain, the one towards the front on the left side is engine oil drain.
Posted on May 22, 2010
SOURCE: "1997 dyna lowrider 80cubic inch
Check for air leaks around intake w/ wd-40 spray if leak rpms increase..or also check accelerator pump is shooting work throttle should see a stream of gas in venturi..
Posted on Sep 18, 2011
Tips for a great answer:
May 12, 2014 | 2004 Harley Davidson FXDL - FXDLI Dyna Low...
Apr 07, 2013 | 2004 Harley Davidson FXDL - FXDLI Dyna Low...
Jan 04, 2013 | 2001 Harley Davidson FXDL Dyna Low Rider
Nov 17, 2012 | 2001 Harley Davidson FXDL Dyna Low Rider
May 12, 2012 | 2009 Harley Davidson FXD Dyna Super Glide
Oct 10, 2010 | Harley Davidson FXDL Dyna Low Rider...
May 22, 2010 | 2004 Harley Davidson FXDL - FXDLI Dyna Low...
Apr 09, 2010 | 2005 Harley Davidson FXDL - FXDLI Dyna Low...
Sep 12, 2009 | 2003 Harley Davidson FXDL Dyna Low Rider
150 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: